Open Science Research Excellence

Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 29414


Select areas to restrict search in scientific publication database:
10001930
Alumina Supported Cu-Mn-Cr Catalysts for CO and VOCs Oxidation
Abstract:
This work studies the effect of chemical composition on the activity and selectivity of γ–alumina supported CuO/ MnO2/Cr2O3 catalysts toward deep oxidation of CO, dimethyl ether (DME) and methanol. The catalysts were prepared by impregnation of the support with an aqueous solution of copper nitrate, manganese nitrate and CrO3 under different conditions. Thermal, XRD and TPR analysis were performed. The catalytic measurements of single compounds oxidation were carried out on continuous flow equipment with a four-channel isothermal stainless steel reactor. Flow-line equipment with an adiabatic reactor for simultaneous oxidation of all compounds under the conditions that mimic closely the industrial ones was used. The reactant and product gases were analyzed by means of on-line gas chromatographs. On the basis of XRD analysis it can be concluded that the active component of the mixed Cu-Mn-Cr/γ–alumina catalysts consists of at least six compounds – CuO, Cr2O3, MnO2, Cu1.5Mn1.5O4, Cu1.5Cr1.5O4 and CuCr2O4, depending on the Cu/Mn/Cr molar ratio. Chemical composition strongly influences catalytic properties, this influence being quite variable with regards to the different processes. The rate of CO oxidation rapidly decrease with increasing of chromium content in the active component while for the DME was observed the reverse trend. It was concluded that the best compromise are the catalysts with Cu/(Mn + Cr) molar ratio 1:5 and Mn/Cr molar ratio from 1:3 to 1:4.
Digital Object Identifier (DOI):

References:

[1] X. Tang, B. Zhang, Y. Li, Y. Xu, Q. Xin, W. Shen, “Carbon monoxide oxidation over CuO/CeO2 catalysts”, Catal. Today, 93-95, 191-198, 2004.
[2] D. R. Mechandjiev, P. G. Dimitrova, I. A. Tzolovski, A. B. Raevski, “Cu/Co spinel containing exhaust gas catalyst and method of its preparation”, WO Patent 03061821, 2003.
[3] G. J. Hutchings, A. A. Mirzaei, R. W. Joyner, M. R. H. Siddiqui, S.H. Taylor, "Ambient temperature CO oxidation using copper manganese oxide catalysts prepared by coprecipitation: effect of ageing on catalyst performance", Catal. Lett., 42 (1-2), pp. 21-24, 1996.
[4] G. J. Hutchings, A. A. Mirzaei, R. W. Joyner, M. R. H. Siddiqui, S. H. Taylor, "Effect of preparation conditions on the catalytic performance of copper manganese oxide catalysts for CO oxidation", Appl. Catal. A: Gen., 166 (1) pp. 143-152, 1998.
[5] L. S. Puckaber, H. Cheung, D. L. Cocke, A. Clearfield, “Reactivity of copper manganese oxides”, Solid State Ionics, 32–33, pp. 206-213, 1989.
[6] S. Vepřek,D. L. Cocke, S. Kehl, H. R. Oswald, ”Mechanism of the deactivation of Hopcalite catalysts studied by XPS, ISS, and other techniques. J. Catal., 100 (1), pp.250-263, 1986.
[7] A. A. Mirzaei, H. R. Shaterian, M. Habibi, G. J. Hutchings, S. H. Taylor, “Characterisation of copper-manganese oxide catalysts:effect of precipitate ageing upon the structure and morphology of precursors and catalysts”, Appl. Catal. A: Gen., 253, pp. 499–508, 2003.
[8] P. Larsson, A. Andersson, “Oxides of copper, ceria promoted copper, manganese and copper manganese on Al2O3 for the combustion of CO, ethyl acetate and ethanol”, Applied Catalysis B: Environmental, Vol. 24, pp. 175–192, 2000.
[9] K. Qian, Z. Qian, Q. Hua, Z. Jiang, W. Huang, “Structure–activity relationship of CuO/MnO2 catalysts in CO oxidation”, Applied Surface Science, Vol. 273, pp. 357– 363, 2013.
[10] Y. Ren, Z. Ma, L. Qian, S. Dai, H. He, P. G. Bruce, “Ordered Crystalline Mesoporous Oxides as Catalysts for CO Oxidation”, Catal. Lett. , 131, pp. 146–154, 2009.
[11] Ferrandon, M., “Mixed Metal Oxide-Noble Metal Catalyst for Total Oxidation of Volatile Organic Compounds and Carbon Oxide”, Department of Chemical Engineering and Technology, Chemical Reaction Engineering, Royal Institute of Technology, Stockholm.PhD Thesis, 2011.
[12] R. McCabe and P. J. Mitchell, “Reactions of ethanol and acetaldehyde over noble metal and metal oxide catalysts”, Ind. Eng. Chem. Prod. Res. Dev., 23 (2), pp. 196–202, 1984.
[13] Y. Hasegawa, K. Fukumoto, T. Ishima, H. Yamamoto, M. Sano, T. Miyake, “Preparation of copper-containing mesoporous manganese oxides and their catalytic performance for CO oxidation”, Appl. Catal. B: Environ. 89, pp. 420–424, 2009.
[14] Y. F. Yo-Yao, J. T. Kummer, “A study of high temperature treated supported metal oxide catalysts”, J. Catal., 46, 1977, pp. 388 – 401.
[15] F. Severino, J. Brito, O. Carias, J. Laine, “Comparative study of Alumina-Supported CuO and CuCr2O4 as catalysts for CO Oxidation”, J. Catal., 102, pp. 172–179, 1986.
[16] Ch.-Ch. Chien, W.-P. Chuang, T.-J. Huang, “Effect of heat-treatment conditions on Cu-Cr/γ-alumina catalyst for carbon monoxide and propene oxidation”, Appl. Catal. A: Gen., 131, pp. 73-87, 1995.
[17] J. Laine, J. Brito, F. Severino, G. Castro, P. Tacconi, S. Yunes, J. Cruz, “Surface copper enrichment by reduction of copper chromite catalyst employed for carbon monoxide oxidation” Catal. Lett., 5, pp. 45-54, 1990.
[18] J. R. Monnier, M. J. Hanrahan, G. Apai, “A study of the Catalytically Active Copper Species in the Synthesis of Methanol Over Cu-Cr Oxide”, J. Catal., 92, pp. 119-126, 1985.
[19] C. A. Leech, and L. E. Campbell, “Spinel Solid Solution Catalysts for Automotive Applications”, Adv. Chem. Ser., 143, pp. 161-177, 1975.
[20] K. Ivanov, E. Kolentsova, D. Dimitrov, “Alumina Supported Copper- manganese Catalysts for Combustion of Exhaust Gases: Effect of Preparation Method”, XIII International Conference on Chemical Engineering and Technology, Lisbon, Portugal, 2015, submitted for publication.
[21] K. Ivanov, D. Dimitrov, B. Boyanov, “Deactivation of Cu - Cr/γ- alumina catalysts for combustion of exhaust gases”, World Academy of Science, Engineering and Technology, Volume 5, pp. 270 – 276, 2011.
[22] S. A. A. Sajadi, M. Khaleghian, “Study of thermal behavior of CrO3 using TG and DSC”, J. Therm. Anal. Calorim., 116, pp. 915–921, 2014.
[23] Z. Ding, W. Martens, R. L. Frost, “Thermal activation of copper nitrate”, J. Mater. Sci. Letters, 21, pp. 1415-1417, 2002.
[24] K. Ivanov, E. Kolentsova, D. Dimitrov, Georgi V. Avdeev, Tatyana T. Tabakova “Alumina Supported Copper-Manganese Catalysts for Combustion of Exhaust Gases: Catalysts Characterization”, XIII International Conference on Chemical Engineering and Applications, Venice, Italy, 2015, Accepted for publication.
[25] J. R. Monnier, M. J. Hanrahan, G. Apai, A study of the Catalytically Active Copper Species in the Synthesis of Methanol Over Cu-Cr Oxide, J. Catal., 92, pp. 119-126, 1985.
[26] P. Wei, M. Bieringer, L.M. D. Cranswick, A. Petric, "In situ high- temperature X-ray and neutron diffraction of Cu–Mn oxide phases." J. Mater. Sci., 45 (4), pp. 1056–1064, 2010.
[27] Y. Tanaka, T. Utaka, R. Kikuchi, T. Takeguchi, K. Sasaki, K. Eguchi, “Water gas shift reaction for the reformed fuels over Cu/MnO catalysts prepared via spinel-type oxide”, J. Catal. 215, pp. 271-278, 2003.
[28] M. Morales, L. Barbero, L. Cadús, “Combustion of volatile organic compounds on manganese iron or nickel mixed oxide catalysts”, Appl. Catal. B: Envir., 67 (3–4), pp. 229–236, 2006.
[29] T. Tsoncheva, M. Jarn, D. Paneva, M. Dimitrov, I. Mitov, Copper and chromium oxide nanocomposites supported on SBA-15 silica as catalysts for ethylacetate combustion: Effect of mesoporous structure and metal oxide composition."Micropor. Mesopor. Mater., 137, pp. 56– 64, 2011.
Vol:13 No:03 2019Vol:13 No:02 2019Vol:13 No:01 2019
Vol:12 No:12 2018Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007