Analytical Design of IMC-PID Controller for Ideal Decoupling Embedded in Multivariable Smith Predictor Control System
References:
[1] W .L. Luyben, “Simple method for tuning SISO controllers in multivariable systems,” Ind. Eng. Chem. Process Des. Dev. vol.25, pp. 654-660, 1986.
[2] P. J. Campo and M. Morari, “Achievable closed-Loop properties of systems under decentralized control: conditions involving the steady-state gain,” IEEE Trans. Autom. Control, vol. 39, pp. 932-943, 1994.
[3] J. Lee, W. Cho and T.F. Edgar, “Multi-loop PI controller tuning for interacting multivariable processes,” Comp. Chem. Eng., vol. 22, pp. 1711-1723, 1998.
[4] N.L.V, Truong and M. Lee, “Independent design of multi-loop PI/PID controllers for interacting multivariable processes,” J. Process Control, vol. 20, pp. 922-933, 2010.
[5] N.L.V. Truong and M. Lee, “Analytical design of multi-loop PI controllers for interactive multivariable processes,”JCEJ., vol 43, pp.196-208, 2010.
[6] N.L.V Truong and M. Lee, “Multi-loop PI controller design based on the direct synthesis for interacting multi-time delay processes,” ISA Trans., vol. 49, pp.79-86, 2010.
[7] Q. C. Wang, T. H. Lee, and C. Liu, Relay feedback: Analysis, identification and control. London, UK: Springer, 2003.
[8] Q. C. Wang, Y. Zhang, and M. S. Chiu, “Non-interacting control design for multivariable industrial processes,” J. Process Control. vol. 13, pp. 253-265, 2013.
[9] W. L. Luyben, “Distillation decoupling,” AIChE J., vol. 16, pp.198–203, 1970.
[10] M. Waller, J. B. Waller, and K. V. Waller, “Decoupling revisited,” Ind. Eng. Chem. Res., vol. 42, pp. 4575–4577, 2003.
[11] W. J. Cai, W. Ni, M. J. He, and C. Y. Ni, “Normalized decoupling–A new approach for MIMO processes control system design,” Ind. Eng. Chem. Res., vol. 47, pp. 7347–7356, 2008.
[12] J. Garrido, F. Vázquez, and F. Morilla, “An extended approach of inverted decoupling,” J. Process Control., vol. 21, pp. 55-68, 2011.
[13] M. Morari and E. Zafiriou, Robust Process Control. NJ, USA: Englewood Cliffs, Prentice Hall, 1989.
[14] S.L. William, Control System Fundamentals. NY, USA: CRC Press, 1999.
[15] R.K. Wood, and M.W. Berry, “Terminal composition control of binary distillation column,” Chem. Eng. Sci., vol. 28, pp. 1707-1717, 1973.
[16] A.P. Loh, C.C. Hang, C.K. Quek, and V.U. Vasnani, “Autotuning of multi-loop proportional - integral controllers using relay feedback,” Ind. Eng. Chem. Res., vol. 32, no. 6, pp. 1102-1107, 1993.
[17] M. Lee, K. Lee, C. Kim, and J. Lee, “Analytical design of multi-loop PID controllers for desired closed-loop responses,” AIChE J., vol. 50, pp. 1631-1635, 2004.
[18] W. H. Ho, T.H. Lee, and O.P. Gan, “Tuning of multi-loop PID controllers based on gain and phase margin specifications,” Ind. Eng. Chem. Res., vol. 36, pp. 2231-2238, 1997.
