Open Science Research Excellence

Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 29636


Select areas to restrict search in scientific publication database:
10008192
Auto Rickshaw Impacts with Pedestrians: A Computational Analysis of Post-Collision Kinematics and Injury Mechanics
Abstract:
Motor vehicle related pedestrian road traffic collisions are a major road safety challenge, since they are a leading cause of death and serious injury worldwide, contributing to a third of the global disease burden. The auto rickshaw, which is a common form of urban transport in many developing countries, plays a major transport role, both as a vehicle for hire and for private use. The most common auto rickshaws are quite unlike ‘typical’ four-wheel motor vehicle, being typically characterised by three wheels, a non-tilting sheet-metal body or open frame construction, a canvas roof and side curtains, a small drivers’ cabin, handlebar controls and a passenger space at the rear. Given the propensity, in developing countries, for auto rickshaws to be used in mixed cityscapes, where pedestrians and vehicles share the roadway, the potential for auto rickshaw impacts with pedestrians is relatively high. Whilst auto rickshaws are used in some Western countries, their limited number and spatial separation from pedestrian walkways, as a result of city planning, has not resulted in significant accident statistics. Thus, auto rickshaws have not been subject to the vehicle impact related pedestrian crash kinematic analyses and/or injury mechanics assessment, typically associated with motor vehicle development in Western Europe, North America and Japan. This study presents a parametric analysis of auto rickshaw related pedestrian impacts by computational simulation, using a Finite Element model of an auto rickshaw and an LS-DYNA 50th percentile male Hybrid III Anthropometric Test Device (dummy). Parametric variables include auto rickshaw impact velocity, auto rickshaw impact region (front, centre or offset) and relative pedestrian impact position (front, side and rear). The output data of each impact simulation was correlated against reported injury metrics, Head Injury Criterion (front, side and rear), Neck injury Criterion (front, side and rear), Abbreviated Injury Scale and reported risk level and adds greater understanding to the issue of auto rickshaw related pedestrian injury risk. The parametric analyses suggest that pedestrians are subject to a relatively high risk of injury during impacts with an auto rickshaw at velocities of 20 km/h or greater, which during some of the impact simulations may even risk fatalities. The present study provides valuable evidence for informing a series of recommendations and guidelines for making the auto rickshaw safer during collisions with pedestrians. Whilst it is acknowledged that the present research findings are based in the field of safety engineering and may over represent injury risk, compared to “Real World” accidents, many of the simulated interactions produced injury response values significantly greater than current threshold curves and thus, justify their inclusion in the study. To reduce the injury risk level and increase the safety of the auto rickshaw, there should be a reduction in the velocity of the auto rickshaw and, or, consideration of engineering solutions, such as retro fitting injury mitigation technologies to those auto rickshaw contact regions which are the subject of the greatest risk of producing pedestrian injury.
Digital Object Identifier (DOI):

References:

[1] World Health Organization. WHO Global Status Report on Road Safety. Author; 2015. Available at: http://www.who.int/violence_injury_ prevention/road_safety_status/2015/en/. Accessed June 2017.
[2] M. M. Hoque, M. McDonald, and R. D. Hall, “Road Safety Improvement in Developing Countries: Priority Issues and Options,” in Proc. 20th Australian Road Research Board (ARRB) Conference, Melbourne, Victoria, Australia, 2001, pp. 1-15.
[3] Y. Han, J. Yang, K. Mizuno, and Y. Matsui, “Effects of Vehicle Impact Velocity, Vehicle Front-End Shapes on Pedestrian Injury Risk,” Traffic Inj. Prev., vol. 13, no. 5, pp. 507–518, Feb. 2012.
[4] A. S. Al-Ghamdi, “Pedestrian–vehicle crashes and analytical techniques for stratified contingency tables”, Accid Anal Prev., vol. 34, no. 2, pp. 205–214, March. 2002.
[5] W. Odero, P. Garner, and A. Zwi, “Road traffic injuries in developing countries: a comprehensive review of epidemiological studies”, Trop. Med. Int. Health., vol. 2, no. 5, pp. 445–460. May. 1997.
[6] S. Sarkar, R. Tay, and J. D. Hunt, “Logistic Regression Model of Risk of Fatality in Vehicle–Pedestrian Crashes on National Highways in Bangladesh”, Transportation Research Record No. 2264. Transportation Research Board of the National Academies, Washington D.C, pp. 128–137.
[7] J. R. Crandall, D. J. Lessley, J. R. Kerrigan, and B. J. Ivarsson, “Thoracic deformation response of pedestrians resulting from vehicle impact”, Int J Crashworthiness., vol.1, no.6, pp. 529–539. Jul. 2006.
[8] Y. Han, J. K. Yang, K. Nishimoto, K. Mizuno, Y. Matsui, D. Nakane, S. Wanami, and M. Hitosugi, “Finite element analysis of kinematic behaviour and injuries to pedestrians in vehicle collisions”. Int J Crashworthiness., vol. 17, no.2, pp. 141–152. April. 2012.
[9] J. R. Kerrigan, D. B. Murphy, D. C. Drinkwater, C. Y. Kam, D. Bose, and J. R. Crandall, “Kinematic corridors for PMHS tested in full-scale pedestrian impact tests,” in proc. 19th International Technical of Conference on the Enhanced Safety of Vehicles (ESV), Lyon, France, 2005, Paper no. 05-0394, pp. 1-18.
[10] J. Kerrigan, C. Arregui, and J. Crandall, “Pedestrian head impact dynamics: comparison of dummy and PMHS in small sedan and lager SUV impacts,” in proc. 21st International Technical Conference on the Enhanced Safety of Vehicles Conference (ESV), Stuttgart, Germany, 2009, pp. 1-15.
[11] X. Liu, and J. Wagner, “Design of a vibration isolation actuator for automotive seating systems—Part II: controller design and actuator performance”. Int J Veh Des., vol. 29, no.4, pp. 357–375. January. 2002.
[12] X. Liu, and J. Yang, “Effects of vehicle impact velocity and front-end structure on dynamic responses of child pedestrians”. Traffic Inj Prev., vol. 4, no.4, pp. 337–344. Jun. 2003.
[13] D. Longhitano, B. Henary, K. Bhalla, J. Ivarsson, and J. Crandall, “Influence of Vehicle Body Type on Pedestrian Injury Distribution,” in proc. SAE, World Congress and Exhibition, 2005, SAE paper no. 1-1876.
[14] Y. Mizuno, and H. Ishikawa, “Summary of IHRA Pedestrian safety WG activities—proposed test methods to evaluate pedestrian protection afforded by passenger cars,” in proc. 19th International Technical Conference on the Enhanced Safety of Vehicles(ESV), Washington, DC, 2005, pp. 1-15.
[15] C.D. Untaroiu, J. Shin, J. Ivarsson, J.R. Crandall, S. Damien, Y. Takahashi, A. Akiyama, and Y. Kikuchi, “A study of the pedestrian impact kinematics using finite element dummy models: the corridors and dimensional analysis scaling of upper-body trajectories”. Int J Crashworthiness., vol.13, no.5, pp. 469–478. October. 2008.
[16] A. Mani, M. Pai, and R. Aggarwal, Sustainable Urban Transport Policy in India. INDIA, World resources institute, 2012.
[17] A. Garg, A. S. Gayen, P. Jena, G. S. Jose, L. Ramamurthy, K. M. Jiyad, and D. Dhanuraj, Study on the Auto rickshaw Sector in Chennai. INDIA, Civitas Consultancies Pvt Ltd for City Connect Foundation Chennai (CCCF), 2010, p. 220.
[18] http://lovson.com/lovson/three-wheeled-vehicles.html (Online): (Accessed September 6, 2016).
[19] M. H. Mamun, M. Miah, and M. I. Islam, “Present Condition of Road Traffic Accident: A Case Study of Rajshahi City, Bangladesh,” International Journal of Computer Applications. vol. 111, no. 7, pp. 975–8887. February. 2015.
[20] A. Mani, M. Pai, and R. Aggarwal, “Sustainable Urban Transport Policy in India: Focus on Auto rickshaw Sector,” Journal of the Transportation Research Board, 2012.
[21] Government of India, Ministry of road transport and highways transport research, “Road Accidents in India-2015”. Report, India, New Delhi, pp. 1–113. 2016.
[22] A. Jha, G. Tiwari, D. Mohan, S. Mukherjee, and S. Banerjee, “Analysis of Pedestrian Movement on Delhi Roads by Using Naturalistic Observation Techniques,” Journal of the Transportation Research Board, 2017.
[23] D. Otte, “Severity and Mechanism of Head Impacts in Car to Pedestrian Accidents,” in proc. International Research Council on Biomechanics of Injury (IRCOBI), Spain, 1999, pp.329-341.
[24] B. Fildes, H. C. Gabler, D. Otte, A. Linder, and L. Sparke, “Pedestrian Impact Priorities Using Real-World CRASH Data and Harm,” in proc. International Research Council on the Biomechanics of Impact (IRCOBI), Graz, Austria, 2004, pp.167-177.
[25] C. E. Neal-Sturgess, E. Carte, R. Hardy, R. Cuerden, L. Guerra, and J. Yang, “APROSYS European In-Depth Pedestrian Database,” in proc. 20th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Loyon, France, 2007, pp. 1–15.
[26] J. Louis Martin, A. Lardy, and B. Laumon, “Pedestrian Injury Patterns According to Car and Casualty Characteristics in France,” in proc. 55th AAAM Annual Conference Annals of Advances in Automotive Medicine, vol.55, 2011. PP.137-146.
[27] L. Turner-Stokes, “The national service framework for long term conditions, a novel approach for a ‘‘new style’’ NSF”. Journal of Neurology and Neurosurgery and Psychiatry. , vol. 76, no. 7, pp. 901-902. 2005.
[28] W. Liu, Z. Hui, K. Li, S. Su, X. Fan, Z. Yin, “Study on pedestrian thorax injury in vehicle-to-pedestrian collisions using finite element analysis”. Chin. J. Traumatology., vol. 18, no. 2, pp. 74–80. April. 2015.
[29] J. K. Yang, “Review of injury biomechanics in car–pedestrian collisions”. Int J Veh Saf., vol. 1, no. 1, pp. 100–116. 2005.
[30]
[30] J. lous Martin, and D. Wu, “Pedestrian fatality and impact speed squared: Cloglog modelling from French national data”. Journal of Traffic Injury Prev.2017
[31] R. W. G. Anderson, A. J. McLean, M. J. B. Farmer, B. H. Lee, and C. G. Brooks, “Vehicle travel speeds and the incidence of fatal pedestrian crashes”. Accid Anal Prev., vol. 29, no. 5, pp. 667–674. September. 1997.
[32] S. J. Ashton. “A Preliminary Assessment of the Potential for Pedestrian Injury Reduction through Vehicle Design,” in proc. 24th Stapp car crash conference, USA, 1980, SAE Paper 801315.
[33] S. J. Ashton, J. B. Pedder, G. M. Mackay, “Pedestrian Injuries and the Car Exterior,” in proc. SAE Congress and Exposition, 1977, SAE Technical Paper 770092.
[34] R. Cuerden, D, Richards, and J. Hill, “Pedestrians and their survivability at different impact speeds,” in Proc. 20th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Washington, DC, USA, 2007, pp.1-12.
[35] L. Hannawald, and F. Kauer, Equal Effectiveness Study on Pedestrian Protection. Dresden, Germany. Technische Universität Dresden, 2004, pp.1-73
[36] C. Kong, and J. Yang, “Logistic regression analysis of pedestrian casualty risk in passenger vehicle collisions in China”. Accid Anal Prev, vol. 42, no. 4, pp. 987–993. July. 2010.
[37] C. Oh, Y. S. Kang, and W. Kim, “Assessing the safety benefits of an advanced vehicular technology for protecting pedestrians”. Accid Anal Prev. vol. 40, no. 3, pp. 935–942. May. 2008.
[38] E. Ros´en, U. Sander, “Pedestrian fatality risk as a function of car impact speed”. Accid Anal Prev, vol. 41, no. 3, pp. 536–542. May. 2009.
[39] F. H. Waiz, M. Hoefliger, and W. Fehlmann, “Speed limit reduction from 60 to 50 km/h and pedestrian injuries,” in Proc. 27th Stapp Car Crash and Child Injury and Restraint Conference With International Research Committee on the Bio kinematics of Impact (IRCOBI). 1983, pp. 277–285.
[40] S. J. Yaksich, Pedestrians with Mileage: A Study of Elderly Pedestrian Accidents in St. Petersburg Florida. American Automobile Association: Traffic Engineering and Safety Department, Washington, DC. 1964.
[41] Department for Transport, Speed: Know your limits. London, 2004.
[42] United Nations, Agreement Concerning the Establishing of Global Technical Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles. Global technical regulation No. 9. Pedestrian Safety, 2008. (Available on line at: https://www.unece.org/trans/main/wp29/wp29wgs/wp29gen/wp29glob.html): (Accessed May 01, 2016).
[43] EEVC/CEVE, “The future for car safety in Europe,” in proc. 5th International Technical Conference on the Enhanced Safety of Vehicles (ESV), London, 1974, PP.1-75.
[44] K. L. Jarrett, and R. A. Saul, “Pedestrian Injury - Analysis of the PCDS Field Collision Data,” in proc. 16th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Windsor, Ontario, Canada, 1998, pp. 1204–1211.
[45] C. B. Chidester, “Final Report-The Pedestrian Crash Data Study,” in proc. 17th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Amsterdam, the Netherlands, 2001.
[46] A. Noureddine, A. Eskandarian, and K. Digges, “Computer Modeling and Validation of a Hybrid III Dummy for Crashworthiness Simulation”. Journal of Mathematical and Computer Modelling, vol. 35, no. 7-8, pp. 885-893. 2002.
[47] http://www.dynaexamples.com/implicit/Yaris%20Dynamic%20Shock%20Absorber%20Loading, “LS-DYNA Examples.” (Accessed November 10, 2016).
[48] L. A. Wood, N. Bekkedahl, and F. L. Roth, “Measurement of Densities of Synthetic Rubbers” Journal of Research of the National Bureau of Standards. vol. 29, no. 1939, pp. 391–396, 1942.
[49] K. M. Srikanth, and R. V. Prakash, “Assessing the structural crashworthiness of a three-wheeler passenger vehicle,” in proc. 2nd International Conference on Research into Design, Bangalore, India, 2009, pp. 152–159.
[50] M. Haldimann, A. Luible, and M. Overened, Structural Use of Glass. Switzerland, Zürich: IABSE, AIPC and IVBH, 2008.
[51] C. Fors, Mechanical properties of interlayers in laminated glass Experimental and Numerical Evaluation. Lund University, 2014.
[52] S. Young Lee, “Crash-Induced Vibration and Safety Assessment of Breakaway-Type Post Structures Made of High Anticorrosion Steels”. Journal of Shock and Vibration, vol. 2016, pp. 1-16, 2016.
[53] DMSB. Technical Regulations for DTM Vehicles. Deutscher Motor Sport Bund e.v, Frankfurt, 2015.
[54] G. James Group, G. James is glass. Brisbane, Australia, 2012.
[55] A. Livesey, and A, Robinson, the repair of vehicle bodies. New York: Routlede, 2013, ch. 4.
[56] http://es.euroncap.com/https://www.bajajauto.com/intracityvehicles/bajajre/ (Accessed accessed April 6, 2017).
[57] W. Liu, S. Su, J. Qiu, Y. Zhang, and Z. Yin, “Exploration of pedestrian head injuries-collision parameter relationships through a combination of retrospective analysis and finite element method,” Int. J. Environ. Res. Public Health, vol. 13, no. 12, pp. 1–15, 2016.
[58] LS-DYNA, “What is the difference between *contact_automatic_ single_surface and *contact_automatic_general?” 2016. (Online): (accessed Jan 10, 2017).
[59] J. Yang, “Effects of Vehicle Front Design Parameters on Pedestrian Head-Brain Injury Protection,” in Proc. 18th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Nagoya, Japan, 2003, pp. 1–8.
[60] R. Eppinger, E. Sun, S. Kuppa, and R. Saul, Supplement: Development of Improved Injury Criteria for the Assessment of Advanced Automotive Restraint Systems – II. National Highway Traffic Safety Administration, U.S. Department of Transportation, Washington, DC, 2000.
[61] G. Sarba, D. Bhalsd, and J. Krebs. LSTC Hybrid III dummies, positioning and post-processing. LSTC, Michigan, 2008, pp.1-21. (Available on line at: http://www.oasyssoftware.com/dyna/en/femodels/lstc_dummies/LSTC.H3.103008_v1.0_Documentation.pdf) (Accessed Sept 15, 2016).
[62] United Nations Economic Commission for Europe (UNECE). (Available online at https://www.unece.org/fileadmin/DAM/trans/doc/2004/wp29grsp/TRANS-WP29-GRSP-35-i...) (Accessed Oct 10, 2017).
[63] H. J. Mertz, P. Prasad, and G. Nusholtz, “Head Injury Risk Assessment for forehead Impacts,” in proc. Congress and Exposition, SAE, 1996, PP. 1–23.
[64] United Nations, Proposed for a Global Technical Regulation on Uniform Provisions Concerning The Approval of Vehicles with Regard to their Construction in order to Improve The Protection and Mitigate the Severity of Injuries to Pedestrians and other Vulnerable Road Users, 2005. (Available at: https://www.unece.org/trans/main/wp29/wp29wgs/wp29grsp/grsp2005.html) (Accessed Feb 20, 2016).
[65] P. Prasad and H. J. Mertz, The Position of the United States Delegation to the ISO Working Group 6 on the Use of HIC in the Automotive Environment,” in proc. Government Industry Meeting and Exposition, SAE, 1985, pp. 1–16.
[66] EEVC, “Improved test method to evaluate pedestrian protection afforded by pedestrian cars”. Technical report, European Enhanced Vehicle Safety Committee, Working Group17, 2002, (Available at: https://www.unece.org/fileadmin/DAM/trans/doc/2006/wp29grsp/ps-187r1e.pdf) (Accessed accessed Nov 12, 2015).
[67] IHRA, Pedestrian safety working group, Technical Report, International Harmonized Research Activities, 2001.
[68] A. Kikuchi, K. Ono, and N. Nakamura, “Human Head Tolerance to Lateral Impact Deduced from Experimental Head Injuries Using Primates,” in proc. 26th Stapp Car Crash Conference, SAE, 1982.
[69] E. Hertz, “A Note on the Head Injury Criterion (HIC) as a Predictor of the Risk of Skull Fracture,” in Proc. 37th AAAM Conference, San Antonio, 1993.
[70] A. McIntosh, D. Kallieris, G. Krabbel, R. Mattern, N. Svensson and K. Ikels, “Head Impact Tolerance in Side Impacts,” in proc. 15th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Melbourne, Australia,1996.
[71] H. J. Mertz, and L. M. Patrick, “Strength and Response of the Human Neck,” in Proc. 15th Stapp Car Crash Conference, SAE, 1971, Paper no.710855.
[72] H. Yamada, and G. Evans, Strength of Biological Materials. USA, Lippincott Williams and Wilkins, 1970, pp. 1-307.
[73] A. Sances, R. C. Weber, S. J. Larson, J. S. Cusick, J. B. Myklebust, and P. R. Walsh, “Bioengineering analysis of head and spine injuries,” Journal of Critical Reviews in Bioengineering, vol. 5, no. 2, 1981, pp.79-122.
[74] R. Eppinger, E. Sun, F. Bandak, M. Haffner, N. Khaewpong, M. Maltese, S. Kuppa, T. Nguyen, E. Takhounts, R. Tannous, A. Zhang, and R. Saul, Development of Improved Injury Criteria for the Assessment of Advanced Automotive Restraint Systems – II. National Highway Traffic Safety Administration, U.S. Department of Transportation, Washington, DC, 1999.
[75] K. D. Klinich, R. A. Saul, G. Augste, S. Backaitis, and M. Kleinberger, Techniques for Developing Child dummy protection reference values. National Highway Traffic Safety Administration, USA, 1996.
[76] W. Goldsmith, and A. Ommaya, “Head and neck injury criteria and tolerance levels”, in Chapon BA, (ed) Biomechanics of Impact Trauma, International Center for Transportation Studies. New York, Elsevier Science Publisher, 1984, pp 149–190.
[77] K.-U. Schmitt, M. H. Muser and P. Niederer, “A New Neck Injury Criterion Candidate for Rear-End Collisions Taking into account Shear Forces and Bending Moments,” in proc. 17th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Amsterdam, The Netherlands, 2001, pp. 1–9.
[78] T. Green, and T. Barth, “Injury evaluation and comparison of lateral impacts when using conventional and inflatable restraints,” in proc. Creswell, OR: SAFE Association, 2006.
[79] M. J. C. Parr, M. E. Miller, N. R. Bridges, J. R. Buhrman, C. E. Perry, and N. L. Wright, “Evaluation of the Nij Neck Injury Criteria with Human Response Data for Use in Future Research on Helmet Mounted Display Mass Properties,” in Proc. The Human Factors and Ergonomics Society 56th Annual Meeting, 2012, pp. 2070–2074.
[80] M. H. Muser, F. H. Walz, and H. Zellmer, “Biomechanical significance of the rebound phase in low speed rear end impacts.,” in proc. International IRCOBI Conference on the Biomechanics of Impact, Montpellier, France, 2000, pp. 411–424.
[81] P. Susan, M. P. H. Baker, and B. O`Neill, “The Injury Severity Score,” Journal of Trauma-Injury Infection & Critical Care, Vol. 16, no. 11, pp. 882–885. Nov. 1976.
[82] A. B. Chidester and R. A. Isenberg, “Final Report - The Pedestrian Crash Data Study,” in Proc. 17th International Conference on the Enhanced Safety of Vehicles (ESV), Amsterdam, The Netherlands, 2001, pp.1-12.
[83] M. Richter, H. C. Pape, D. Otte, and C. Krettek, “Improvements in passive car safety led to decreased injury severity - A comparison between the 1970s and 1990s,” Injury, vol. 36, no. 4, pp. 484–488. April. 2005.
[84] C. Arregui-Dalmases, M. C. Rebollo-Soria, D. Sanchez-Molina, J. Velazquez-Ameijide, and T. Alvarez, “Pedestrian head injury biomechanics and damage mechanism. Pedestrian protection automotive regulation assessment” Journal of Neurocirugia, vol. 28, no. 1, pp. 41–46. February. 2017.
[85] N. Yoganandan, F. A. Pintar, J. Zhang, T. A. Gennarelli, and N. Beuse, “Biomechanical Aspects of Blunt and Penentrating Head Injuries,” IUTAM Symposium on Impact Biomechanics: From Fundamental Insights to Applications, 2005, vol. 124, pp. 173–184.
[86] T. A. Gennarelli, E. Wodzin. E, and AAAM, The Abbreviated Injury Scale 2005. Barrington, IL: American Association for the Advancement of Automotive Medicine, 2005.
[87] J. L. Forman, H. Joodaki, A. Forghani, P. Riley, V. Bollapragada, D. Lessley, B. Overby, S. Heltzel and J. Crandall, “Bio fidelity Corridors for Whole-Body Pedestrian Impact with a Generic Buck,” in proc. International Research Council on the Biomechanics of Injury (IRCOBI), Lyon, France, 2015, pp. 356-372.
[88] X. J. Liu, J. K. Yang, and P. Lovsund, “A Study of Influences of Vehicle Speed and Front Structure on Pedestrian Impact Responses Using Mathematical Models,” Journal of Traffic Injury Prevention, vol. 3, pp. 31‐42, 2002.
[89] Y. Peng, C. Deck, J. Yang, D. Otte, and R. Willinger, “A study of kinematics of adult pedestrian and head impact conditions in case of passenger car collisions based on real world accident data”, in proc. IRCOBI Conference, Dublin, Ireland, 2012, pp.766-778.
[90] E. Ros´en, J.E. Kallhammer, D. Eriksson, M. Nentwich, R. Fredriksson, and K. Smith, “Pedestrian injury mitigation by autonomous braking,” Journal of Accid Anal Prev, vol. 42, 2010, pp.1949–1957.
[91] R. Fredriksson, E. Rosen, and A. Kullgren, “Priorities of pedestrian protection—a real-life study of severe injuries and car sources,” Journal of Accid Anal Prev, vol. 42, pp. 1672–1681, 2010
[92] L. B. Cao, Z. Zhou, B. H. Jiang, and G. J. Zhang, “Development and validation of the FE model for a 10-year-old child head. Chin,” Journal of Biomedical Engineering, vol. 33, pp. 63–70, 2014.
[93] S. Ruan, H. Li, X. Wang, and Y. Shen, “A New Exploration of the Applicability of the Head Injury Criterion,” Journal of Biomedical Engineering., vol. 24, no.6, pp.1373-1377, 2007.
[94] R. Meijer, M. Philippens and J. van Hoof, “Side Impact Neck Injury Criteria and Tolerances in Aerospace Safety Injury”, in proc. 13th International Workshop of Biomechanics Research, 2003, pp.31-46.
[95] K. H. Yang, P. C. Begeman, M. H. Muser, P. Niederer, F. Walz “On the role of cervical facet joints in rear end impact neck injury mechanism,” SP-1226, SAE 970497, 1997, pp. 127-129.
[96] B. Deng, F. Luan, P. Begeman, K. Yang, A. King, S. Tashman, “Testing shear hypothesis of whiplash injury using experimental and analytical approaches,” in Frontiers in Whiplash Trauma (Eds. N. Yoganandan and F. Pintar), IOS Press, Amsterdam 2000.
Vol:13 No:05 2019Vol:13 No:04 2019Vol:13 No:03 2019Vol:13 No:02 2019Vol:13 No:01 2019
Vol:12 No:12 2018Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007