Excellence in Research and Innovation for Humanity

International Science Index


Select areas to restrict search in scientific publication database:
10006300
Evaluation of Microleakage of a New Generation Nano-Ionomer in Class II Restoration of Primary Molars
Abstract:
Objective: This in vitro study was carried out to assess the microleakage properties of nano-filled glass ionomer in comparison to resin-reinforced glass ionomers. Material and Methods: 40 deciduous molar teeth were included in this study. Class-II cavity was prepared in a standard form for all the specimens. The teeth were randomly distributed into two groups (20 per group) according to the restorative material used either nano-glass ionomer or Photac Fill glass ionomer restoration. All specimens were thermocycled for 1000 cycles between 5 and 55 °C. After that, the teeth were immersed in 2% methylene blue dye then sectioned and evaluated under a stereomicroscope. Microleakage was assessed using linear dye penetration and on a scale from zero to five. Results: Two way ANOVA test revealed a statistically significant lower degree of microleakage in both occlusal and gingival restorations (0.4±0.2), (0.9±0.1) for nano-filled glass ionomer group in comparison to resin modified glass ionomer (2.3±0.7), (2.4±0.5). No statistical difference was found between gingival and occlusal leakage regarding the effect of the measured site. Conclusion: Nano-filled glass ionomer shows superior sealing ability which enables this type of restoration to be used in minimum invasive treatment.

References:

[1] S. Opal, S. Garg, A. Dhindsa, T. Taluja, "Minimal invasive clinical approach in indirect pulp therapy and healing of deep carious lesions." The journal of clinical pediatric dentistry, vol.38, no.3, pp. 185-192, 2014.
[2] H. C. Güngör, E. Canoğlu, Z. C. Çehreli, "The Effects of Dentin Adhesives and Liner Materials on the Microleakage of Class II Resin Composite Restorations in Primary and Permanent Teeth." The Journal of Clinical Pediatric Dentistry, vol. 38, no.3, pp. 223-228, 2014.
[3] R. R. Braga, J. L. Ferracane, "Alternative in polymerization contraction stress management." J Appl Oral Sci., vol.12, no.1-11, Sep. 2004.
[4] C. Andrein, F. Robert, "Microleakage of a new improved glass ionomer restorative material in primary and permanent teeth." Pediatric Dentistry, vol. 24, no.1, pp. 23-28, 2002.
[5] I. F. Naiva, M. A. de Andrada, L. N. Baratieri, S. Monteiro, A. V. Ritter, "An in vitro study of the effect of restorative technique on maeginal leakage in posterior composites." Oper Dent., vol. 23, no.6, pp.282-9, 1998.
[6] W. W. Bracket, T. D. Gunnin, W. W. Jonson, J. E. Conkin, "Microleakage of light cured glass ionomer restorative materials." Quintessence Int., vol.26, no.8, pp.583-585, 1995.
[7] A. D. Wilder, E. j. Swift, K. N. May, J. Y. Thompson, R. A. McDougal, "Effect of finishing technique on the microleakage and surface texture of resin modified glass ionomer restorative materials." J Dent., vol. 28, no.5, pp.367-373, Jul, 2000.
[8] S. K. Sidhu, L. J. Henderson, "In vitro marginal leakage of cervical composite restorations lined with a light-cured glass ionomer." Oper Dent., vol.17, pp.7-12, 1992.
[9] K. M. Y. Hse, S. K. Leung, H. Y. Wei, "Resin-ionomer restorative materials for children: A review" Australian Dental Journal, vol.44, no.1, pp.1-11, 1999.
[10] A. Falsafi, S. B. Mitra, J. D. Oxman, T. T. Ton, H. T. Bui, "Mechanisms of setting reactions and interfacial behavior of a nano-filled resin-modified glass ionomer." Academy of Dental Materials, vol. 31, no. 4, pp. 234-239, 2013.
[11] J. Mungara, J. Philip, E. Joseph, S. Rajendran, A. Elangovan, G. Selvaraju, "Comarative evaluation of fluoride release and recharge of pre-reacted glass ionomer composite and nano-ionomeric glass ionomer with daily fluoride exposure. In vitro study." J Indian Soc Pedod Prev Dent., vol. 31, no.4, pp.234-9, Oct-Dec. 2013.
[12] S. Konde, S. Raj, D. Jaiswa, "Clinical evaluation of a new art material: Nanoparticulated resin-modified glass ionomer cement." J Int Soc Prev Community Dent. vol. 2, no. 2, pp.42–47, Jul-Dec .2012.
[13] S. Upadhyay, A. Rao, "Nanoionomer: Evaluation of microleakage." J Indian Soc Pedod Prev Dent., vol.29, pp.21–4, 2011.
[14] S. Khera, K .Chan, "Microleakage and enamel finish." J Prosthet Dent., vol.39, pp.414–9, 1978.
[15] V. Narayana, S. Ashwathanarayana, G. Nadig, S. Rudraswamy, N. Doggalli, and S. Vijai, "Assessment of Microleakage in Class II Cavities having Gingival Wall in Cementum using Three Different Posterior Composites." J Int Oral Health, vol.6, no.6, pp.35-41, 2014.
[16] Ferrari M, Mason PN: Adaptation and microleakage of indirect resin inlays: An in vitro investigation. Qunitessence Int. 1993; 24(12):861-5.
[17] M. Ghavamnasiri, H. Moosavi, N. Tahvildamejad, "Effect of centripetal and incremental methods in class II composite resin restorations on gingival microleakage." J Contemp Dent Pract., vol.8, no.2, pp.113-20, 2007.
[18] R. E. Going, M. Massler, H. L. Dute, "Marginal penetration of dental restorations by different radioactive isotopes." J. Dent Res., vol.39, pp.273-84, 1960.
[19] A. B. Fuks, Z. Shey, "In vitro assessment of marginal leakage of combined amalgam-sealant restorations on occlusal surfaces of permanent posterior teeth." J Dent Child, vol.50, pp.425-29, 1983.
[20] M. Ghandehari, G. Mighani, S. Shahabi, N. Chiniforush, Z. Shirmohammadi, "Comparison of Microleakage of Glass Ionomer Restoration in Primary Teeth Prepared by Er: YAG Laser and the Conventional Method." Journal of Dentistry, Tehran University of Medical Sciences, Tehran, Iran, vol.9, no.3, pp. 215-20, 2012.
[21] E. A. El-Ashiry, N. S. Bakry, N. Farsi, D. Farsi, "Microleakage Evaluation of Two Different Nano-Restorative Materials in Primary Molars: In vitro Study." Life Science Journal, vol.9, no.3, pp.2242-2250, 2012.
[22] S. Cho, A. C. Cheng, "A Review of Glass Ionomer Restorations in the Primary Dentition." J Can Dent Assoc., vol.65, pp.491-5, 1999.
[23] N. M. Kilpatrick, J. J. Murray, J. F. McCabe, "The use of a reinforced glass-ionomer cermet for the restoration of primary molars: a clinical trial." Br Dent J., vol.179, pp.175-9, 1995.
[24] Y. Korkmaz, S. Gurgan, E. Firat , D. Nathanson, "Shear bond strength of three different nano-restorative materials to dentin" Operative Dentistry, vol.35, no.1, pp. 50-57, 2010.
[25] N. A. G. Gonzalez, N. H. A. Kasim, R. D. Aziz, "Microleakage Testing." Annals Dent Univ Malaya, vol. 4, pp, 31-37, 1997.
[26] A. H. Alani, C. G. Toh, "Detection of microleakage around dental restorations: a review." Oper Dent., vol.22, no.4, pp.173-85, Jul-Aug. 1997.
[27] J. B. de Almeida, J. A. Platt, Y. Oshida, B. K. Moore, M. A. Cochran, G. J. Eckert, "Three different methods to evaluate microleakage of packable composites in Class II restorations." Oper Dent., vol.28, no.4, pp.453–60, 2003.
[28] M. S. Gale, B. W. Darvell, "Thermal cycling procedures for laboratory testing of dental restorations." J Dent., vol.27, pp.89-99, 1999.
[29] F. B. Pazinatto, B. B. Campos, L. C. Costa, M. T. Atta, "Effect of the number of thermocycles on microleakage of resin composite restorations." Pesqui Odontol Bras., vol.17, no.4, pp.337-41, 2003.
[30] A. Castro, R. F. Feigal," Microleakage of a new improved glass ionomer restorative material in primary and permanent teeth." Pediatric Dentistry, vol.24, no.1, 2002.
[31] S. Özcan, I. Yıkılgan, O. Bala, M. Betül Üçtaşlı, H. Ömürlü. "The Effect of Different Liners on the Microleakage of Class II Restorations after Thermocycling and Occlusal Loading." Marmara Dental Journal, vol. 2, pp. 71-75, 2013.
[32] A. D. Puckett, J. G. Fitchie, B. Bennett, J. H. Hembree, "Microleakage and thermal properties of hybrid ionomer restoratives." Quintessence Int., vol.26, pp.577-81, 1995.
[33] R. Wadenyha, J. Smith, F. Mante, "Microleakage of nano particles filled resin modified glass ionomer using atraumatic restorative technique in primary molars." NY State Dent J., vol.76, pp.36-9, 2010.
[34] A. Diwanji, V. Dhar, R. Arora, A. Madhusudan, A. S. Rathore, "Comparative evaluation of microleakage of three restorative glass ionomer cements: An in vitro study." Journal of natural science, biology and medicine, vol.5, no.2, pp.373-377, 2014.
[35] K. Gorseta, D. Glavina, I. Skrinjaric," Microleakage of newly developed nano-ionomer and glass ionomer cement restoration." Available from: http://iadr.confex.com/iadr/ced09/webprogram/Paper123622.html. Back to cited text no. 7 accessed in Jan. 2015
[36] E. Coutinoho, M. V. Cardoso, J. De Munck, "Bonding effectiveness and interfacial characterization of a nano-filled resin-modified glass-ionomer" Journal of Dental Material, vol.25, pp.1347-1357, 2009.
[37] N. Eronat, E. Yilmaz, N. Kara, A. Topaloglu, "Comparative evaluation of microleakage of nano-filled resin-modified glass ionomer: An in vitro study." Eur J Dent., vol. 8, no.4, pp.450–455, Oct-Dec. 2014.
[38] Prati G, Montanari G, Biagini F, Pashley DH: Effects of dentin surface treatments on the shear bond strength of Vitrabond. Dent Mater. 1992; 8:21-6.
Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007