Static and Dynamic Characteristics of an Appropriated and Recessed n-GaN/AlGaN/GaN HEMT
The objective of this paper is to simulate static I-V and dynamic characteristics of an appropriated and recessed n-GaN/AlxGa1-xN/GaN high electron mobility (HEMT). Using SILVACO TCAD device simulation, and optimized technological parameters; we calculate the drain-source current (lDS) as a function of the drain-source voltage (VDS) for different values of the gate-source voltage (VGS), and the drain-source current (lDS) depending on the gate-source voltage (VGS) for a drain-source voltage (VDS) of 20 V, for various temperatures. Then, we calculate the cut-off frequency and the maximum oscillation frequency for different temperatures.
We obtain a high drain-current equal to 60 mA, a low knee voltage (Vknee) of 2 V, a high pinch-off voltage (VGS0) of 53.5 V, a transconductance greater than 600 mS/mm, a cut-off frequency (fT) of about 330 GHz, and a maximum oscillation frequency (fmax) of about 1 THz.
 M. Abe, "A quarter century of HEMT device technology,” Proc. 21st Symposium on Materials Science and Engineering, Research Center of Ion Beam Technology, pp.7–14, Hosei University, Dec. 2002.
 R. Yildirim, H. Güçlü Yavuzcan, F. V. Çelebi, L. Gokrem, "Temperature dependent Rolletti stability analysis of GaN HEMT,” Optoelectronics And Advanced Materials–Rapid Communications, Vol. 3, No. 8, August 2009, pp. 781–786.
 K. Kodama and M. Kuzuhara, "Theoretical simulation of DC and RF performance for AlInN/InGaN/AlInN double-heterojunction FET using a Monte Carlo approach,” IEICE Electronics Express, Vol.5, No.24, pp. 1074–1079, December 25, 2008.
 L. Shen, "Advanced Polarization-Based Design of AlGaN/GaN HEMTs,” Thesis, University of California, Santa Barbara, 2004.