Open Science Research Excellence

Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 29644


Select areas to restrict search in scientific publication database:
10001570
Structural Performance Evaluation of Segmented Wind Turbine Blade through Finite Element Simulation
Abstract:
Transportation of long turbine blades from one place to another is a difficult process. Hence a feasibility study of modularization of wind turbine blade was taken from structural standpoint through finite element analysis. Initially, a non-segmented blade is modeled and its structural behavior is evaluated to serve as reference. The resonant, static bending and fatigue tests are simulated in accordance with IEC61400-23 standard for comparison purpose. The non-segmented test blade is separated at suitable location based on trade off studies and the segments are joined with an innovative double strap bonded joint configuration. The adhesive joint is modeled by adopting cohesive zone modeling approach in ANSYS. The developed blade model is analyzed for its structural response through simulation. Performances of both the blades are found to be similar, which indicates that, efficient segmentation of the long blade is possible which facilitates easy transportation of the blades and on site reassembling. The location selected for segmentation and adopted joint configuration has resulted in an efficient segmented blade model which proves the methodology adopted for segmentation was quite effective. The developed segmented blade appears to be the viable alternative considering its structural response specifically in fatigue within considered assumptions.
Digital Object Identifier (DOI):

References:

[1] "Design limits and solutions for very large wind turbines," UPWIND, EWEA, pp. 10-18, March 2011.
[2] D. A. Griffin, "Blade System Design Studies Volume I: Composite Technologies for Large Wind," SANDIA National Laboratories, California, USA, 2002.
[3] F. A. Saldanha, V. V. Rao, J. Chirstopher and R. Adhikari, "Investigations on concepts for modularizing a horizontal axis wind turbine blade," in Proceedings of the ASME 2013 IDETC/CIE Conferences, Portland, Oregon, Aug 4-7, 2013.
[4] MEGAWIND, "30m split rotor blade," (Online). Available: http://www.cres.gr/megawind.
[5] P. Vionis, D. Lekou, F. Gonzalez and Others, "Development of a MW scale wind turbine for high wind complex terrain sites; the MEGAWIND Project," in Proceedings of EWEC conference on Innovative turbines, components, systems and techniques, Athens, March 2006.
[6] Paul W. Judge, "Segmented Wind turbine Blade". US Patent US7854594B2, December 21, 2010.
[7] Enno Eyb, "Modular rotor blade for a wind turbine and methods for assembling same". US Patent US20070253824 A1, Nov 1, 2007.
[8] M. L. Baker and C. P. Arelldt, "Lightweight composite truss wind turbine blade". US Patent US7517198 B2, 14 April 2009.
[9] P. T. Hayden and P. A. Broome, "Wind Turbine Blade". US Patent US20110103962 A1, 5 May 2011.
[10] D. J. Kootstra, "Wind Turbine Rotor Blade Joint". US Patent US8172539 B2, MAY 8, 2012.
[11] J. Stege, "Wind turbine rotor blade". Europe Patent EP2749765A1, July 2, 2014.
[12] "Modular design eases big wind blade build," COMPOSITES, August 2013.
[13] J. Broehl, "Wind Energy Innovations: Segmented Blades," 4 August 2014. (Online). Available: http://www.navigantresearch.com/blog/.
[14] S. N. Ganeriwala and M. Richardson, "Modes indicate cracks in wind turbine blade," in 29th IMAC Conference, Jacksonville, FL, 2011.
[15] H. B. Pederson and O. J. Kristensen, "Applied modal analysis of wind turbine blades," Riso National Laboratory, Denmark, February 2003, ISBN: 87-550-3170-6.
[16] G. C. Larsen, M. H. Hansen, A. Baumgart and I. Carlen, "Modal analysis of wind turbine blade," Riso National Laboratory, Denmark, February 2002, ISBN: 87-550-2697-4.
[17] F. Fors and T. Mekanik, "Analysis of metal to composite adhesive joints in space applications” MS thesis, Linkoping University, Sweden, 2010.
[18] V. A. Kalkhoran, D. S. Majd and B. Mohammadi, "Fatigue Life Prediction for Adhesively Bonded Root Joint of Composite Wind Turbine Blade Using Cohesive Zone Approach," Conference of Recent Advances in Composite Materials for Wind Turbines Blades, The World Academic Publishing Co. Ltd., 2013, pp. 221-231, ISBN 978-0 9889190-0-6, Available at: http://www.academicpub.org/amsa.
[19] Eric Hau, Wind Turbines: Fundamentals, Technologies, Application, Economics, 2nd ed., Germany: Springer, 2006.
[20] A. R. Jha, Wind Turbine Tecnology, 1st ed., NewYork: CRC Press, 2011.
[21] Guidelines for Design of Wind Turbine, 2nd ed., Denmark: DNV and RISO National Laboratories, 2002.
[22] K. Vallons, G. Adolphs, P. Lucas and S. V. Lomov, "Quasi-UD glass fibre NCF composites for wind energy applications: a review of requirements and existing fatigue data for blade materials," Journal of Mechanics and Industry, vol. 14, pp. 175-189, 2013.
[23] IEC-TS64100-23, Wind turbine generator systems –Part 23:Full-scale structural testing of rotor blades, 1st ed., International Electrotechnical Commission, 2001.
[24] S. K. Babu, N. V. Subbaraju, S. M. Reddy and N. D. Rao, "The material selection for typical wind turbine blades, using MADM approach and analysis of blades," in Conference on Multiple criteria decision making, Chania, Greece, June 19-23, 2006.
[25] H. J. Sutherland, "A Summary of the Fatigue Properties of Wind Turbine Materials," Wind Energy, vol. 3, pp. 1-34, 2000.
[26] P. J. Schubel and R. J. Crossley, "Wind Turbine Blade Design," Energies, vol. 5, pp. 3425-3449, 2012.
[27] Peter Robert Greaves, "Fatigue Analysis and Testing of Wind Turbine Blades, Durham Thesis," Durham University, Durham, UK, May 2013.
[28] R. M. Jhones, Mechanics of composite materials, 2nd ed., Philadelphia: Taylor and Francis, 1999, ISBN: 1-56032-712-X.
[29] K. Kaw, Mechanics of composite materials, 2nd ed., Taylor and Francis, 2006.
[30] DOE/MSU Composite Material Fatigue Database, Version 18.1, US, March 25, 2009.
[31] D. A. Griffin, "Blade System Design Studies Volume II: Preliminary Blade Designs and Recommended Test Matrix," SANDIA National Laboratories, California, USA, June, 2004.
[32] "Airfoil coordinates," (Online). Available: http://www.nrel.gov.
[33] D. T. Griffith and T. D. Ashwill, "The Sandia 100-meter All-glass Baseline Wind Turbine Blade, SANDIA Report," SANDIA National Laboratories, California, USA, June, 2011.
[34] F. M. Jensen, "Ultimate strength of a large wind turbine blade, Risø- PhD-34(EN)," Riso National Laboratories and DTU, Denmark, May, 2008.
[35] Hysol-EA 9394: Epoxy Paste Adhesive Catalogue, CA, USA: Henkel Corporation, Available At: www.aerospace.henkel.com.
[36] F. Fors and T. Mekanik, "Analysis of metal to composite adhesive joints in space applications” MS thesis, Linkoping University, Sweden, 2010.
[37] J. L. C. (Ed.), EUROCOMP Design Code and Handbook: Structural Design of Polymer Composites, Chapman and Hall, 2005, ISBN: 0-203- 47513-5.
[38] ANSYS V14 User Manual, ANSYS Inc.
Vol:13 No:05 2019Vol:13 No:04 2019Vol:13 No:03 2019Vol:13 No:02 2019Vol:13 No:01 2019
Vol:12 No:12 2018Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007