Surface Temperature of Asphalt Pavements with Colored Cement-Based Grouting Materials Containing Ceramic Waste Powder and Zeolite
 M. Santamouris, “Using cool pavements as a mitigation strategy to fight urban heat island–A review of the actual developments,” Renewable and Sustainable Energy Review, vol. 26, 2013, pp. 224–240.
 Y. Qin, “A review on the development of cool pavements to mitigate urban hear island effect”, Renewable and Sustainable Energy Reviews, vol. 52, 2015, pp. 445–459.
 T. Gustavsson, “Variation in road surface temperature due to topography and wind”, Theoretical and Applied Climatology, vol. 41, 1990, pp. 227–236.
 N. K. Bansal, S. N. Garg, and S. Kothari, “Effect of exterior surface color on the thermal performance of buildings”, Building and Environment, vol. 27, 1992, pp. 31–37.
 T. Asaeda and V. T. Ca, “Characteristics of permeable pavement during hot summer weather and impact on the thermal environment”, Building and Environment, vol. 35, 2000, pp. 363–375.
 T. Kinouchi, T. Yoshinaka, N. Fukae, and M. Kanda, “Development of cool pavement with dar colored high albedo coating,” In: Fifth Conference for the Urban Environment, 2004.
 A. Synnefa, M. Santamouris, and I. Livada, “A study of the thermal performance of reflective coatings for the urban environment”, Solar Energy, vol. 80, 2006, pp.968–981.
 A. Synnefa, M. Santamouris, and K. Apostolakis, “On the development, optical properties and thermal performance of cool colored coatings for the urban environment”, Solar Energy, vol. 81, 2007, pp. 488–497.
 M. Scholz and P. Grabowiecki, “Review of permeable pavement systems”, Building and Environment, vol. 42, 2007, pp. 3830–3836.
 T. Nakayama and T. Fujita, “Cooling effect of water–holding pavements made of new materials on water and heat budgets in urban areas”, Landscape and Urban Planning, vol. 96, 2010, pp. 57–67.
 A. Synnefa, T. Karlessi, N. Gaitani, M. Santamouris, D. N. Assimakopoulos, and C. Papakatsikas, “Experimental testing of cool colored thin layer asphalt and estimation of its potential to improve the urban microclimate,” Building and Environment, vol. 26, 2011, pp. 38–44.
 H. Li, J. Harvey, and A. Kendall, “Field measurement of albedo for different land cover materials and effects on thermal performance”, Building and Environment, vol. 59, 2013, pp. 536–546.
 D. Yinfei, S. Qin, and W. Shengyue, “Highly oriented heat–induced structure of asphalt pavement for reducing pavement temperature”, Energy and Buildings, vol. 85, 2014, pp. 23–31.
 M. Hendel, M. Colombert, Y. Diab, and L. Royon, “Improving a pavement–watering method on the basis of pavement surface temperature measurements”, Urban Climate, vol. 10, 2014, pp. 189–200.
 Y. Qin and J. E. Hiller, “Understanding pavement–surface energy balance and its implications on cool pavement development”, Energy and Buildings, vol. 85, 2014, pp. 389–399.
 M. Hendel and L. Royon, “The effect of pavement–watering on subsurface pavement temperatures”, Urban Climate, vol. 14, 2015, pp. 650–654.
 J. Yang, Z. H. Wang, and K. E. Kaloush, “Environmental impacts of reflective materials: Is high albedo a ‘silver bullet’ for mitigating urban heat island?”, Renewable and Sustainable Energy Reviews, vol. 47, 2015, pp. 830–843.
 F. Rosso, A. L. Pisello, F. Cotana, and M. Ferrero, “On the thermal and visual pedestrians’ perception about cool natural stones for urban paving: A field survey in summer conditions”, Building and Environment, vol. 107, 2016, pp. 198–214.
 C. Efthymiou, M. Santamouris, D. Kolokotsa, and A. Koras, “Development and testing of photovoltaic pavement for heat island mitigation”, Solar Energy, vol. 130, 2016, pp. 148–160.
 H. Higashiyama, M. Sappakittipakorn, M. Sano, O. Takahashi, and S. Tsukuma, “Characteristics of chloride ingress into mortars containing ceramic waste aggregate,” Journal of Material Cycles and Waste Management, vol. 17, no. 3, 2015, pp. 513–521.
 H. Higashiyama, M. Sappakittipakorn, M. Mizukoshi, and O. Takahashi, “Mechanical properties and chloride diffusion of ceramic waste aggregate mortar containing ground granulated blast-furnace,” International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, vol. 9, no. 9, 2015, pp. 843–848.
 H. Higashiyama, M. Sano, F. Nakanishi, O. Takahashi, and S. Tsukuma, “Development of water absorption asphalt pavement having surface temperature rise reducing function and verification by field tests,” Hosou, Kensetsutosho, vol. 51, no. 1, 2016, pp. 19–23 (in Japanese).
 H. Higashiyama, M. Sano, F. Nakanishi, O. Takahashi, and S. Tsukuma, “Field measurements of road surface temperature of several asphalt pavements with temperature rise reducing function”, Case Studies in Construction Materials, vol. 4, 2016, pp. 73–80.
 H. Higashiyama, M. Sano, F. Nakanishi, M. Sugiyama, O. Takahashi, and S. Tsukuma, “Effect on surface temperature reduction of asphalt pavements with cement–based materials containing ceramic waste powder”, International Journal of Civil, Environment, Structural, Construction and Architectural Engineering, vol. 10, no. 8, 2016, pp. 1014–1020.
 Japan Society of Civil Engineers, “Test method for flowability of grout mortar for prepacked concrete (P–type funnel method), JSCE–F 521–1999,” Standard Specifications for Concrete Structures, Test Methods and Specifications, 2005, p. 209 (in Japanese).
 Japan Society of Civil Engineers, “Test method for compressive strength of mortar and cement paste sing cylindrical specimens, JSCE–G 505–1999,” Standard Specifications for Concrete Structures, Test Methods and Specifications, 2005, pp. 247– 248 (in Japanese).