Excellence in Research and Innovation for Humanity

International Science Index


Select areas to restrict search in scientific publication database:
10006401
Applicability of Overhangs for Energy Saving in Existing High-Rise Housing in Different Climates
Abstract:
Upgrading the thermal performance of building envelope of existing residential buildings is an effective way to reduce heat gain or heat loss. Overhang device is a common solution for building envelope improvement as it can cut down solar heat gain and thereby can reduce the energy used for space cooling in summer time. Despite that, overhang can increase the demand for indoor heating in winter due to its function of lowering the solar heat gain. Obviously, overhang has different impacts on energy use in different climatic zones which have different energy demand. To evaluate the impact of overhang device on building energy performance under different climates of China, an energy analysis model is built up in a computer-based simulation program known as DesignBuilder based on the data of a typical high-rise residential building. The energy simulation results show that single overhang is able to cut down around 5% of the energy consumption of the case building in the stand-alone situation or about 2% when the building is surrounded by other buildings in regions which predominantly rely on space cooling though it has no contribution to energy reduction in cold region. In regions with cold summer and cold winter, adding overhang over windows can cut down around 4% and 1.8% energy use with and without adjoining buildings, respectively. The results indicate that overhang might not an effective shading device to reduce the energy consumption in the mixed climate or cold regions.
Digital Article Identifier (DAI):

References:

[1] Pérez-Lombard, L., J. Ortiz, and C. Pout, “A review on buildings energy consumption information”. Energy and Buildings, vol. 40, no. 3, pp. 394-398, 2008.
[2] Kneifel, J., “Life-cycle carbon and cost analysis of energy efficiency measures in new commercial buildings”. Energy and Buildings, vol. 42, no. 3, pp. 333-340, 2010.
[3] Huang, Y., J.-l. Niu, and T.-m. Chung, “Energy and carbon emission payback analysis for energy-efficient retrofitting in buildings—Overhang shading option”. Energy and Buildings, vol. 44, no., pp. 94-103, 2012.
[4] Ossen, D.R., M.H. Ahmad, and N.H. Madros, “Optimum Overhang Geometry for Building Energy Saving in Tropical Climates”. Asian Architecture and Building Engineering, vol. 4, no. 2, pp. 563-570, 2005.
[5] Offiong, A. and A.U. Ukpoho, “An analysis of solar gain through externally shaded window of buildings”. Renewable energy, vol. 29, no. 1, pp. 131-150, 2004.
[6] Offiong, A. and A.U. Ukpoho, “External window shading treatment effects on internal environmental temperature of buildings”. Renewable Energy, vol. 29, no. 14, pp. 2153-2165, 2004.
[7] Bojić, M., “Application of overhangs and side fins to high-rise residential buildings in Hong Kong”. Civil Engineering and Environmental Systems, vol. 23, no. 4, pp. 271-285, 2006.
[8] Huang, Y., J.-l. Niu, and T.-m. Chung, “Comprehensive analysis on thermal and daylighting performance of glazing and shading designs on office building envelope in cooling-dominant climates”. Applied Energy, vol. 134, no., pp. 215-228, 2014.
[9] Ebrahimpour, A. and M. Maerefat, “Application of advanced glazing and overhangs in residential buildings”. Energy Conversion and Management, vol. 52, no. 1, pp. 212-219, 2011.
[10] Raeissi, S. and M. Taheri, “Optimum overhang dimensions for energy saving”. Building and Environment, vol. 33, no. 5, pp. 293-302, 1998.
[11] Aldawoud, A., “Conventional fixed shading devices in comparison to an electrochromic glazing system in hot, dry climate”. Energy and Buildings, vol. 59, no., pp. 104-110, 2013.
[12] Kim, G., H.S. Lim, T.S. Lim, L. Schaefer, and J.T. Kim, “Comparative advantage of an exterior shading device in thermal performance for residential buildings”. Energy and Buildings, vol. 46, no., pp. 105-111, 2012.
[13] Jeong Tai, K. and G. Kim, “Advanced External Shading Device to Maximize Visual and View Performance”. Indoor and Built Environment, vol. 19, no. 1, pp. 65-72, 2010.
[14] Kapur, N.K., “A comparative analysis of the radiant effect of external sunshades on glass surface temperatures”. Solar Energy, vol. 77, no. 4, pp. 407-419, 2004.
[15] Lee, E.S. and A. Tavil, “Energy and visual comfort performance of electrochromic windows with overhangs”. Building and Environment, vol. 42, no. 6, pp. 2439-2449, 2007.
[16] Bellia, L., F. De Falco, and F. Minichiello, “Effects of solar shading devices on energy requirements of standalone office buildings for Italian climates”. Applied Thermal Engineering, vol. 54, no. 1, pp. 190-201, 2013.
[17] Kamal, M.A., “A study on shading of buildings as a preventive measure for passive cooling and energy conservation in buildings”. International Journal of Civil & Environmental Engineering, vol. 10, no. 6, pp. 19-22, 2010.
[18] Brownlee, A. EI, J.A. Wright, and M.M. Mourshed. “A Multi-Objective Window Optimisation Problem”, in the 13th annual conference companion on Genetic and evolutionary computation, Dublin, 2011, pp. 89-90.
[19] Weytjens, L., S. Attia, G. Verbeeck, and A.D. Herde, “A comparative study of the architect-friendliness of six building performance simulation tools”. Sustainable Building Technology and Urban Development vol. 2, no. 3, pp. 237-244, 2012.
[20] Attia, S., L. Beltrán, A.D. Herde, and J. Hensen, ‘Architect friendly’: a comparison of ten different building performance simulation tools, in Eleventh International IBPSA Conference. 2009: Glasgow, Scotland. p. 204-211.
[21] Attia, S.G.M. and A. De Herde, Early design simulation tools for net zero energy buildings: a comparison of ten tools, in IBPSA. 2011, Designbuilder: Sydney, Australia.
[22] Tronchin, L. and K. Fabbri, “Energy performance building evaluation in Mediterranean countries: Comparison between software simulations and operating rating simulation”. Energy and Buildings, vol. 40, no. 7, pp. 1176-1187, 2008.
[23] Wasilowski, H. and C. Reinhart. “Modelling an existing building in DesignBuilder-custom versus default inputs”, in Building Simulation 2009 Glasgow, 2009
[24] Virote, J. and R. Neves-Silva, “Stochastic models for building energy prediction based on occupant behavior assessment”. Energy and Buildings, vol. 53, no., pp. 183-193, 2012.
[25] Wang, S., C. Yan, and F. Xiao, “Quantitative energy performance assessment methods for existing buildings”. Energy and Buildings, vol. 55, no., pp. 873-888, 2012.
[26] Radhi, H., “On the optimal selection of wall cladding system to reduce direct and indirect CO2 emissions”. Energy, vol. 35, no. 3, pp. 1412-1424, 2010.
[27] Standard of Climatic Regionalization for Architecture, in GB50178-93. 1994, Ministry of Construction of the People’s Republic of China: China.
[28] Chen, L., et al., “Sky view factor analysis of street canyons and its implications for daytime intra-urban air temperature differentials in high-rise, high-density urban areas of Hong Kong: a GIS-based simulation approach”. International Journal of Climatology, vol. 32, no. 1, pp. 121-136, 2012.
[29] Ng, E., L. Chen, Y. Wang, and C. Yuan, “A study on the cooling effects of greening in a high-density city: An experience from Hong Kong”. Building and Environment, vol. 47, no., pp. 256-271, 2012.
[30] Ng, E., “Policies and technical guidelines for urban planning of high-density cities – air ventilation assessment (AVA) of Hong Kong”. Building and Environment, vol. 44, no. 7, pp. 1478-1488, 2009.
[31] LAM, J.C., “An analysis of residential sector energy use in Hong Kong”. Energy and Buildings, vol. 21, no. 1, pp. 1-8, 1995.
[32] EMSD, Hong Kong Energy End-use Data 2014, E.a.M.S. Department, Editor. 2014, The Government of The Hong Kong Special Administrative Region: Hong Kong. p. 1-74.
[33] Yang, F., S.S.Y. Lau, and F. Qian, “Summertime heat island intensities in three high-rise housing quarters in inner-city Shanghai China: Building layout, density and greenery”. Building and Environment, vol. 45, no. 1, pp. 115-134, 2010.
[34] Tang, Y.-Q., Z.-D. Cui, J.-X. Wang, C. Lu, and X.-X. Yan, “Model test study of land subsidence caused by high-rise building group in Shanghai”. Bulletin of Engineering Geology and the Environment, vol. 67, no. 2, pp. 173-179, 2008.
[35] High-rise Buildings of Beijing, in EMPORIS. 2016.
[36] Hui, X., Housing, urban renewal and socio-spatial integration: a study on rehabilitating the former socialistic public housing areas in Beijing. 2013, TU Delft.
[37] Yang, J., J. McBride, J. Zhou, and Z. Sun, “The urban forest in Beijing and its role in air pollution reduction”. Urban Forestry & Urban Greening, vol. 3, no. 2, pp. 65-78, 2005.
[38] Li, F., R. Wang, J. Paulussen, and X. Liu, “Comprehensive concept planning of urban greening based on ecological principles: a case study in Beijing, China”. Landscape and Urban Planning, vol. 72, no. 4, pp. 325-336, 2005.
[39] Yang, L., J.C. Lam, and C.L. Tsang, “Energy performance of building envelopes in different climate zones in China”. Applied Energy, vol. 85, no. 9, pp. 800-817, 2008.
[40] Yu, J., C. Yang, and L. Tian, “Low-energy envelope design of residential building in hot summer and cold winter zone in China”. Energy and Buildings, vol. 40, no. 8, pp. 1536-1546, 2008.
[41] K.S.Y. Wan and F.H.W. Yik, “Representative building design and internal load patterns for modelling energy use in residential buildings in Hong Kong”. Applied Energy, vol. 77, no. 2014, pp. 69-85, 2004.
[42] M. Bojic, F. Yik, and P. Sat, “Influence of thermal insulation position in building envelope on the space cooling of highrise residential buildings in Hong Kong”. Energy and Buildings, vol. 33, no. 2001, pp. 569-581, 2001.
[43] M. Bojic, F. Yik, and P. Sat, “Influence of envelope and partition characteristics on the space cooling of high-rise residential buildings in Hong Kong”. Building and Environment, vol. 37, no. 2002, pp. 347-355, 2002.
[44] Cheung, C.K., R.J. Fuller, and M.B. Luther, “Energy-efficient envelope design for high-rise apartments”. Energy and Buildings, vol. 37, no. 1, pp. 37-48, 2005.
[45] Chan, A.L.S. and T.T. Chow, “Evaluation of Overall Thermal Transfer Value (OTTV) for commercial buildings constructed with green roof”. Applied Energy, vol. 107, no., pp. 10-24, 2013.
[46] Ali-Toudert, F. and H. Mayer, “Numerical study on the effects of aspect ratio and orientation of an urban street canyon on outdoor thermal comfort in hot and dry climate”. Building and Environment, vol. 41, no. 2, pp. 94-108, 2006.
Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007