Excellence in Research and Innovation for Humanity

International Science Index


Select areas to restrict search in scientific publication database:
10004443
Cold Spray Deposition of SS316L Powders on Al5052 Substrates and Their Potential Using for Biomedical Applications
Abstract:
The corrosion behaviour of 316L stainless steel coatings obtained by cold spray method was investigated in this study. 316L powders were deposited onto Al5052 aluminum substrates. The coatings were produced using nitrogen (N2) process gas. In order to further improve the corrosion and mechanical properties of the coatings, heat treatment was applied at 250 and 750 °C. The corrosion performances of the coatings were compared using the potentiodynamic scanning (PDS) technique under in-vitro conditions (in Ringer’s solution at 37 °C). In addition, the hardness and porosity tests were carried out on the coatings. Microstructural characterization of the coatings was carried out by using scanning electron microscopy attached with energy dispersive spectrometer (SEM-EDS) and X-ray diffraction (XRD) technique. It was found that clean surfaces and a good adhesion were achieved for particle/substrate bonding. The heat treatment process provided both elimination of the anisotropy in the coating and resulting in healing-up of the incomplete interfaces between the deposited particles. It was found that the corrosion potential of the annealed coatings at 750 °C was higher than that of commercially 316 L stainless steel. Moreover, the microstructural investigations after the corrosion tests revealed that corrosion preferentially starts at inter-splat boundaries.
Digital Article Identifier (DAI):

References:

[1] K.K. Chew, S.H.S. Zein and A.L. Ahmad, “The corrosion scenario in human body: stainless steel 316L orthopaedic implants”, Nat. Sci. 04 (2012) 184–188. doi:10.4236/ns.2012.43027.
[2] U. Kamachimudali, T.M. Sridhar and B. Raj, “Corrosion of bio implants”, Sadhana. 28 (2003) 601–637. doi:10.1007/BF02706450.
[3] B. Dikici, Z. Esen, O. Duygulu and S. Gungor, “Corrosion of metallic biomaterials”, in: N. Mitsuo, T. Narushima and M. Nakai (Eds.), “Advances in metallic biomaterials: tissues, materials and biological reactions”, Springer-Verlag Berlin Heidelberg, Berlin, 2015, pp. 275–303. doi: 10.1007/978-3-662-46836-4
[4] E.J.F. Shackelford and W. Alexander, “Thermal properties of materials”, in: E.J.F. Shackelford, W. Alexander (Eds.), “Materials Science and Engineering Handbook”, CRC Press, Boca Raton, (2001).
[5] B. AL-Mangour, R. Dallala, F. Zhim, R. Mongrain and S. Yue, “Fatigue behavior of annealed cold-sprayed 316L stainless steel coating for biomedical applications”, Mater. Lett. 91 (2013) 352–355. doi:10.1016/j.matlet.2012.10.030.
[6] A. Sova, S. Grigoriev, A. Okunkova and I. Smurov, “Cold spray deposition of 316L stainless steel coatings on aluminium surface with following laser post-treatment”, Surf. Coatings Technol. 235 (2013) 283–289. doi:10.1016/j.surfcoat.2013.07.052.
[7] D. Williams, “Titanium: epitome of biocompatibility or cause for concern”, J Bone Jt. Surg. (1993) 1993–1994.
[8] B. AL-Mangour, R. Mongrain, E. Irissou and S. Yue, “Improving the strength and corrosion resistance of 316L stainless steel for biomedical applications using cold spray”, Surf. Coatings Technol. 216 (2013) 297–307. doi:10.1016/j.surfcoat.2012.11.061.
[9] B. Dikici, H. Yilmazer, I. Ozdemir and M. Isik, “The effect of post-heat treatment on microstructure of 316L cold-sprayed coatings and their corrosion performance”, J. Therm. Spray Technol. 25 (2016) 704–714. doi:10.1007/s11666-016-0402-z.
[10] G. Sundararajan, P. S. Phani, A. Jyothirmayi and R.C. Gundakaram, “The influence of heat treatment on the microstructural, mechanical and corrosion behaviour of cold sprayed SS 316L coatings”, J. Mater. Sci. 44 (2009) 2320–2326. doi:10.1007/s10853-008-3200-2.
[11] B. Aksakal, M. Gavgali and B. Dikici, “The effect of coating thickness on corrosion resistance of hydroxyapatite coated Ti6Al4V and 316L SS implants”, J. Mater. Eng. Perform. 19 (2010) 894–899. doi:10.1007/s11665-009-9559-7.
[12] D.P. Perl, “Relationship of aluminum to Alzheimer’s disease”, Environ. Health Perspect. 63 (1985) 149–153. doi:10.1289/ehp.8563149.
[13] K.U. Mudali, T. M. Sridhar, B. Raj, “Corrosion of bio implants”, Sadhana. 28 (2003), 601–637. doi: 10.1007/BF02706450.
[14] M. Sumita, T. Hanawa, S. H. Teoh, “Development of nitrogen-containing nickel-free austenitic stainless steels for metallic biomaterials—review”, Mater. Sci. Eng. C. 24 (2004), 753–760. doi:10.1016/j.msec.2004.08.030
[15] L. Kanerva, L. Forstrom, “Allergic nickel and chromate hand dermatitis induced by orthopaedic metal implant”, Contact. Dermatitis. 44 (2001), 103–104. doi: 10.1034/j.1600-0536.2001.4402096.x
Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007