Excellence in Research and Innovation for Humanity

International Science Index


Select areas to restrict search in scientific publication database:
9996659
Development of Basic Patternmaking Using Parametric Modelling and AutoLISP
Abstract:
This study is aimed towards the automisation of basic patternmaking for traditional clothes for the purpose of mass production using AutoCAD to apply AutoLISP feature under software Hazi Attire. A standard dress form (industrial form) with the size of small (S), medium (M) and large (L) size is measured using full body scanning machine. Later, the pattern for the clothes is designed parametrically based on the measured dress form. Hazi Attire program is used within the framework of AutoCAD to generate the basic pattern of front bodice, back bodice, front skirt, back skirt and sleeve block (sloper). The generation of pattern is based on the parameters inputted by user, whereby in this study, the parameters were determined based on the measured size of dress form. The finalized pattern parameter shows that the pattern fit perfectly on the dress form. Since the pattern is generated almost instantly, these proved that using the AutoLISP programming, the manufacturing lead time for the mass production of the traditional clothes can be decreased.
Digital Article Identifier (DAI):

References:

[1] B. Xu, and S.V. Sreenivasan, "A 3-D body imaging and measurement system for apparel customization,” Journal of the Textile Institute, vol. 90, no. 2, pp. 104-120, 1999.
[2] B. Xu, and Y. Zhong, "Three-dimensional technology for apparel mass customization: part III: visualization of three-dimensional garments,” Journal of the Textile Institute., vol. 94, no. 1, pp. 92-110, Oct 2003.
[3] C.-H. Hsu, H.-F. Lin, et al., "Developing female size charts for facilitating garment production by using data mining,” Journal of the Chinese Institute of Industrial Engineers, vol. 24, no. 3, pp. 245-251, Feb 2010.
[4] J.-J. Fang and C.-H Tien, "Trimmed NURBS surface applications in computerized 3D fashion design for garment industry,” International Journal of Clothing Science and Technology, vol. 25, no. 1, pp. 123–135, July 2012.
[5] Ministry of Finance, "Economic Reports 2007/2008,” Government of Malaysia. (retrieved on 12 November 2010).
[6] N. Maki, T. Tabe, et al., "Design and utilization of a fuzzy knowledge-based system for design feature recognition of freehand illustration,” International Journal of Production Research, vol. 35, no. 3, pp. 17-27, Jan 1997.
[7] R. Rasiah and R. Ofreneo, "The dynamics of textile and garment manufacturing in Asia,” Journal of Contemporary Asia, vol. 39, no. 4, pp. 501-511, Aug 2009.
[8] S. Thomassey, P. Bruniaux, "A template of ease allowance for garments based on a 3d reverse methodology,” International Journal of Industrial Ergonomics, vol. 43, no. 5, pp. 406-416, Sept 2013.
[9] X. Tao, and P. Bruniaux, "Towards advance three-dimensional modeling of garment prototype from draping technique,” International Journal of Clothing Science and Technology, vol. 25, no. 4, pp. 266-283, Jan 2013.
[10] Y.S. Ding, and Y.C. Xu, "Intelligent optimal selection of garment sizes by using immune algorithm and AHP method,”Journal of the Textile Institute, vol. 99, no. 3,pp. 15–64, June 2008.
Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007