Brakes are one of the most important safety and performance components in automobiles and airplanes. Development of brakes has mainly focused on increasing braking power and stability. Nowadays, brake noise, vibration and harshness (NVH) together with brake dust emission and pad life are very important to vehicle drivers. The main objective of this research is to define the relationship between compressibility of friction materials and their tendency to generate vibration. An experimental study of the friction-induced vibration obtained by the disc brake system of a passenger car is conducted. Three commercial brake pad materials from different manufacturers are tested and evaluated under various brake conditions against cast iron disc brake. First of all, compressibility test for the brake friction material are measured for each pad. Then, brake dynamometer is used to simulate and reproduce actual vehicle braking conditions. Finally, a comparison between the three pad specimens is conducted. The results showed that compressibility have a very significant effect on reduction the vibration occurrence.
 D. Chan and G.W. Stachowiak (2004). “Review of Automotive Brake Friction Materials”, Proc. Instn Mech Engrs, 218, Part D.J. Automobile Engineering pp.953-966.
 Kima Y.C., Cho M.H., Kim S.J., Jang H., The effect of phenolic resin, potassium titanate, and CNSL on the tribological properties of brake friction materials, Wear 2008; 264: 204–210.
 D. Nguyen and J. Taylor. Continuous process for manufacturing of friction materials.In Bridging the Centuries with Sampe’s Materials and Process Technology,Book 2, ISBN 0-938994-86-7, pages 2307 – 2317. Society for the Advancement of Material and Process Engineering, 2000.
 M.H. Cho, S.J. Kim, D. Kim, H. Jang, Effects of ingredients on tribological characteristics of a brake lining: an experimental case study, Wear 58 (2) (2005) 1682–1687.
 K. Farhang, S. Ozcan, and P. Filip, The effect of wear groove on vibration and noise of aircraft brakes: theoretical and experimental evidence, Tech. Rep., SAE, Paper No. 2008-01-2557, Warrendale, PA, 2008.
 E. Wegmann, A. Stenkamp, and A. Dohle. Relation between compressibility and viscoelastic material properties of a brake pad. SEA Technical Papers, 2009-01-3017:1–11, 2009.
 P. Sanders, T. Dalka, and D. Hartsock. Friction material compressibility as a function of pressure, temperature, and frequency. SAE Technical Paper, 2008-01-2574:1–4, 2008.
 Byeong Uk Jeong, Sang Do Kwak, Cheol Ki Kim “Optimization for brake feeling in vehicle without brake noise” SEA Technical Papers 2016-01-1928.