Electrophoretic deposition (EPD) of p-type Bi2Te3 material has been accomplished, and a high quality crack-free thick film has been achieved for thermoelectric (TE) applications. TE generators (TEG) can convert waste heat into electricity, which can potentially solve global warming problems. However, TEG is expensive due to the high cost of materials, as well as the complex and expensive manufacturing process. EPD is a simple and cost-effective method which has been used recently for advanced applications. In EPD, when a DC electric field is applied to the charged powder particles suspended in a suspension, they are attracted and deposited on the substrate with the opposite charge. In this study, it has been shown that it is possible to prepare a TE film using the EPD method and potentially achieve high TE properties at low cost. The relationship between the deposition weight and the EPD-related process parameters, such as applied voltage and time, has been investigated and a linear dependence has been observed, which is in good agreement with the theoretical principles of EPD. A stable EPD suspension of p-type Bi2Te3 was prepared in a mixture of acetone-ethanol with triethanolamine as a stabilizer. To achieve a high quality homogenous film on a copper substrate, the optimum voltage and time of the EPD process was investigated. The morphology and microstructures of the green deposited films have been investigated using a scanning electron microscope (SEM). The green Bi2Te3 films have shown good adhesion to the substrate. In summary, this study has shown that not only EPD of p-type Bi2Te3 material is possible, but its thick film is of high quality for TE applications.
 Snyder GJ, Toberer ES. Complex thermoelectric materials. Nature Materials. 2008; 7: 105-14.
 Shakouri A. Recent developments in semiconductor thermoelectric physics and materials. Annual Review of Materials Research. 2011;41: 399-431.
 Dresselhaus MS, Chen G, Tang MY, Yang RG, Lee H, Wang DZ, et al. New directions for low-dimensional thermoelectric materials. Advanced Materials. 2007; 19: 1043-53.
 Hamid Elsheikh M, Shnawah DA, Sabri MFM, Said SBM, Haji Hassan M, Ali Bashir MB, et al. A review on thermoelectric renewable energy: Principle parameters that affect their performance. Renewable and Sustainable Energy Reviews. 2014;30:337-55.
 Koumoto K, Terasaki I, Funahashi R. Complex oxide materials for potential thermoelectric applications. MRS Bulletin. 2006;31:206-10.
 LeBlanc S, Yee SK, Scullin ML, Dames C, Goodson KE. Material and manufacturing cost considerations for thermoelectrics. Renewable and Sustainable Energy Reviews. 2014;32:313-27.
 DiSalvo FJ. Thermoelectric cooling and power generation. Science. 1999;285:703-6.
 Besra L, Liu M. A review on fundamentals and applications of electrophoretic deposition (EPD). Progress in Materials Science. 2007;52:1-61.
 Corni I, Ryan MP, Boccaccini AR. Electrophoretic deposition: From traditional ceramics to nanotechnology. Journal of the European Ceramic Society. 2008;28:1353-67.
 Ferrari B, Moreno R. EPD kinetics: A review. Journal of the European Ceramic Society. 2010;30:1069-78.
 Boccaccini AR, Zhitomirsky I. Application of electrophoretic and electrolytic deposition techniques in ceramics processing. Current Opinion in Solid State and Materials Science. 2002;6:251-60.
 Wei M, Ruys AJ, Milthorpe BK, Sorrell CC, Evans JH. Electrophoretic deposition of hydroxyapatite coatings on metal substrates: A nanoparticulate dual-coating approach. Journal of Sol-Gel Science and Technology. 2001;21:39-48.
 Talebi T, Raissi B, Maghsoudipour A. Electrophoretic deposition of YSZ electrolyte on porous NiO-YSZ substrate for solid oxide fuel cells. Key Engineering Materials. 2009;412:215- 20.
 Shane MJ, Talbot JB, Kinney BG, Sluzky E, Hesse KR. Electrophoretic deposition of phosphors. Journal of Colloid and Interface Science. 1994;165:334-40.
 Put S, Vleugels J, Anné G, Van der Biest O. Functionally graded ceramic and ceramic–metal composites shaped by electrophoretic deposition. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2003;222:223-32.
 Boccaccini AR, Cho J, Subhani T, Kaya C, Kaya F. Electrophoretic deposition of carbon nanotube–ceramic nanocomposites. Journal of the European Ceramic Society. 2010;30:1115-29.
 Maiti HS, Datta S, Basu RN. High-Tc Superconductor Coating on Metal Substrates by an Electrophoretic Technique. Journal of the American Ceramic Society. 1989;72:1733-5.
 Shan W, Zhang Y, Yang W, Ke C, Gao Z, Ye Y, et al. Electrophoretic deposition of nanosized zeolites in non-aqueous medium and its application in fabricating thin zeolite membranes. Microporous and Mesoporous Materials. 2004;69:35-42.
 Hamaker HC. Formation of a deposit by electrophoresis. Transactions of the Faraday Society. 1940;35:279-87.
 Ata MS, Zhitomirsky I. Electrophoretic nanotechnology of ceramic films. Advances in Applied Ceramics: Structural, Functional & Bioceramics. 2012;111:345-50.
 Boccaccini AR, Cho J, Roether JA, Thomas BJC, Jane Minay E, Shaffer MSP. Electrophoretic deposition of carbon nanotubes. Carbon. 2006;44:3149-60.
 Van Tassel JJ, Randall CA. Ionic Gradients at an Electrode above the Equilibrium Limit Current. 1. Concentration and Charge Gradients in an Immobile Electrolyte. The Journal of Physical Chemistry C. 2007;111:3341-8.
 Van Tassel JJ, Randall CA. Role of ion depletion in the electrophoretic deposition of alumina powder from ethanol with increasing quantities of HCl. Journal of Materials Science. 2006;41:8031-46.
 Nobuyuki K, Takeyo T, Hiromasa S, Touru H. Preparation of Various Oxide Films by an Electrophoretic Deposition Method: A Study of the Mechanism. Japanese Journal of Applied Physics. 1995;34:1643.