Open Science Research Excellence

Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 29212

Select areas to restrict search in scientific publication database:
The Use of Plant-Based Natural Fibers in Reinforced Cement Composites
Plant-based natural fibers are used more increasingly in construction materials. It is done to reduce the pressure on the built environment, which has been increased dramatically due to the increases world population and their needs. Plant-based natural fibers are abundant in many countries. Despite the low-cost of such environmental friendly renewable material, it has the ability to enhance the mechanical properties of construction materials. This paper presents an extensive discussion on the use of plant-based natural fibers as reinforcement for cement-based composites, with a particular emphasis upon fiber types; fiber characteristics, and fiber-cement composites performance. It also covers a thorough overview on the main factors, affecting the properties of plant-based natural fiber cement composite in it fresh and hardened state. The feasibility of using plant-based natural fibers in producing various construction materials; such as, mud bricks and blocks is investigated. In addition, other applications of using such fibers as internal curing agents as well as durability enhancer are also discussed. Finally, recommendation for possible future work in this area is presented.
Digital Object Identifier (DOI):


[1]. World Commission on Environment and Development (WCED), Our common future: the brundtland report on environment and development, Oxford University Press, Oxford (1987)
[2]. L. Melchert, The Dutch sustainable building policy: a model for developing countries?, Build. Environ., 42 (2007), pp. 893–901
[3]. O. Onuaguluchi, & Banthia, N, Plant-based natural fiber reinforced cement composites, Cement and Concrete Composites, 68, 98-108. (2016, February 19).
[4]. G. Ramakrishna, T. Sundararajan, Studies on the durability of natural fibers and the effect of corroded fibers on the strength of mortar, Cem. Concr. Compos., 27 (2005), pp. 575–582
[5]. M.-A. Arsène, H. Savastano Jr., S.M. Allameh, K. Ghavami, W. Soboyejo, Cementitious composites reinforced with vegetable fibers, Proceedings of the First Inter-American Conference on Non-conventional Materials and Technologies in the Eco-construction and Infrastructure, Joao-Pessoa, Brazil (November 2003), pp. 13–16
[6]. N. Reddy, Y. Yang, Bio fibers from agricultural byproducts for industrial applications, Trends Biotechnol., 23 (1) (2005), pp. 22–27
[7]. V.A. Alvarez, R.A. Ruscekaite, A. Vazquez, Mechanical Properties water absorption behavior of composites made from a biodegradable matrix and alkaline-treated sisal fibers, J. Compos. Mater., 37 (17) (2003), pp. 1575–1588
[8]. O. Faruk, A.K. Bledzki, H. Fink, M. Sain, Biocomposites reinforced with natural fibers: 2000–2010, Prog. Polym. Sci., 37 (11) (2012), pp. 1552–1596
[9]. Y. Li, Y.W. Mai, L. Ye, Sisal fiber and its composites: a review of recent developments, Compos. Sci. Technol., 60 (2000), pp. 2037–2055
[10]. M.A. Mansur, M.A. Aziz, A study on jute fiber reinforced cement composites, Int J Cem Compos. Lightweight Concr., 4 (2) (1982), pp. 75–82
[11]. H. Savastano, V. Agopyan, A.M. Nolasco, L. Pimentel, Plant fiber reinforced cement components for roofing, Constr. Build. Mater., 13 (1999), pp. 433–438
[12]. K. Bilba, M.-A. Arsene, A. Quensanga, Sugar cane bagasse fiber reinforced cement composites. Part I. Influence of the botanical components of bagasse on the setting of bagasse/cement composite, Cem. Concr. Compos., 25 (2003), pp. 91–96
[13]. R. Sudin, N. Swamy, Bamboo and wood fiber cement composites for sustainable infrastructure regeneration, J. Mater Sci., 41 (2006), pp. 6917–6924
[14]. D. Sedan, C. Pagnoux, A. Smith, T. Chotard, Mechanical properties of hemp fiber reinforced cement: influence of the fiber/matrix interaction, J. Eur. Ceram., 28 (2008), pp. 183–192
[15]. M. Fan, M.K. Ndikontar, X. Zhou, J.N. Ngamveng, Cement-bonded composites made from tropical woods: compatibility of wood and cement, Constr. Build. Mater., 36 (2012), pp. 135–140
[16]. G. Vaickelionis, R. Vaickelioniene, Cemeny hydration in the presence of wood extractives and pozzolan mineral admixtures, Ceram. − Silikáty, 50 (2) (2006), pp. 115–122
[17]. M.A. Sanjuán, R.D. Tolédo Filho, Effectiveness of crack control at early age on the corrosion of steel bars in low modulus sisal and coconut fiber-reinforced mortars, Cem. Concr. Res., 28 (4) (1998), pp. 555–565
[18]. R.D. Toledo Filho, M.A. Sanjuan, Effect of low modulus sisal and polypropylene fiber on the free and restrained shrinkage of mortars at early age, Cem. Concr. Res., 29 (10) (1999), pp. 1597–1604
[19]. R.D. Tolédo Filho, K. Ghavami, M.A. Sanjuan, G.L. England, Free, restrained and drying shrinkage of cement mortar composites reinforced with vegetable fibers, Cem. Concr. Compos., 27 (2005), pp. 537–546
[20]. E. Boghossian, L.D. Wegner, Use of flax fibers to reduce plastic shrinkage cracking in concrete, Cem. Concr. Compos., 30 (2008), pp. 929–937
[21]. T. Soleimani, A.K. Merati, M. Latifi, A.K. Ramezanianpor, Inhibition of cracks on the surface of cement mortar using estabragh fibers, Adv. Mater Sci. Eng. (2013), p. 5 Article ID 656109
[22]. F.A. Silva, R.D. Toledo Filho, J.A. Melo Filho, E.M.R. Fairbairn, Physical and mechanical properties of durable sisal fiber–cement composites, Constr. Build. Mater, 24 (2010), pp. 777–785
[23]. G. Ramakrishna, T. Sundararajan, Impact strength of a few natural fiber reinforced cement mortar slabs: a comparative study, Cem. Concr. Compos., 27 (2005), pp. 547–553
[24]. S.S. Munawar, K. Umemura, S. Kawai, Characterization of the morphological, physical, and mechanical properties of seven non-wood plant fiber bundles, J. Wood Sci., 53 (2) (2007), pp. 108–113
[25]. H. Savastano Jr., P.G. Warden, R.S.P. Coutts, Brazilian waste fibers as reinforcement for cement-based composites, Cem. Concr. Compos., 22 (2000), pp. 379–384
[26]. H. Savastano Jr., P.G. Warden, R.S.P. Coutts, Microstructure and mechanical properties of waste fiber-cement composites, Cem. Concr. Compos., 27 (2005), pp. 583–592
[27]. R.S.P. Coutts, Y. Ni, B.C. Tobias, Air-cured bamboo pulp reinforced cement, J. Mater Sci. Lett., 13 (1994), pp. 283–285
[28]. R.S.P. Coutts, P.G. Warden, Air cured, Abaca reinforced cement composites, Int. J. Cem. Comp. Lightweight Conc., 9 (2) (1987), pp. 69–73
[29]. R.S.P. Coutts, P.G. Warden, Sisal pulp reinforced cement mortar, Cem. Concr. Compos., 14 (1992), pp. 17–21
[30]. R.S.P. Coutts, P. Kightly, Bonding in wood fiber cement composites, J. Mater Sci., 19 (1984), pp. 3355–3359
[31]. R.S.P. Coutts, Flax fibers as a reinforcement in cement mortars, Int. J. Cem. Comp. Lightweight Conc., 5 (4) (1983), pp. 257–262
[32]. N. El-Ashkar, H. Nanko, K. Kurtis, Effect of Moisture State on Mechanical Behavior and Microstructure of Pulp Fiber-Cement Mortars, J. Mater Civ. Eng., 19 (8) (2007), pp. 691–699
[33]. R.D. Tolédo Filho, K. Scrivener, G.L. England, K. Ghavami, Durability of alkali-sensitive sisal and coconut fibers in cement mortar composites, Cem. Concr. Compos., 22 (2000), pp. 127–143
[34]. G. Mármol, S.F. Santos, H. Savastano Jr., M.V. Borrachero, J. Monzó, J. Payá, Mechanical and physical performance of low alkalinity cementitious composites reinforced with recycled cellulosic fibers pulp from cement kraft bags, Ind. Crop Prod., 49 (2013), pp. 422–427
[35]. C.J. Knill, J.F. Kennedy, Degradation of Cellulose under Alkaline Conditions, Carbohyd Polym., 51 (2003), pp. 281–300
[36]. B.J. Mohr, H. Nanko, K.E. Kurtis, Durability of kraft pulp fiber–cement composites to wet/dry cycling, Cem. Concr. Compos., 27 (2005), pp. 435–448
[37]. L.C. Roma Jr., L.S. Martello, H. Savastano Jr., Evaluation of mechanical, physical and thermal performance of cement-based tiles reinforced with vegetable fibers, Constr. Build. Mater, 22 (2008), pp. 668–674
[38]. A. Peled, A. Bentur, Fabric structure and its reinforcing efficiency in textile reinforced cement composites, Compos. Part A, 34 (2003), pp. 107–118
[39]. A. Peld, S. Sueki, B. Mobasher, Bonding in fabric cement systems: effects of fabrication methods, Cem. Concr. Res., 36 (2006), pp. 1661–1671
[40]. M. Gencoglu, Effect of fabric types on the impact behavior of cement-based composites in flexure, Mater. Struct., 42 (2009), pp. 135–147
[41]. D. Zhu, M. Gencoglu, B. Mobasher, Low velocity impact behavior of AR glass fabric reinforced cement composites in flexure, Cem. Concr. Compos., 31 (6) (2009), pp. 379–387
[42]. A. Peled, B. Mobasher, Tensile behavior of fabric cement-based composites: pultruded and cast, J. Mater Civ. Eng., 19 (4) (2007), pp. 340–348
[43]. B.J. Mohr, H. Nanko, K.E. Kurtis, Aligned kraft pulp fiber sheets for reinforcing mortar, Cem. Concr. Compos., 28 (2) (2006), pp. 161–172
[44]. F.A. Silva, B. Mobasher, R.D. Toledo Filho, M. Curbach, F. Jesse (Eds.), Advances in Natural Fiber Cement Composites: a Material for the sustainable construction industry. 4th Colloquium on Textile Reinforced Structures (CTRS4) (2009), pp. 377–388 Dresden, Germany, June 3 – 5
[45]. A. Hakamy, F.U.A. Shaikh, I.M. Low Microstructures and mechanical properties of hemp fabric reinforced organoclay–cement nanocomposites, Constr. Build. Mater, 49 (2013), pp. 298–307.
[46]. A. Bentur, S. Igarashi, K. Kovler, Prevention of autogenous shrinkage in high strength concrete by internal curing using wet lightweight aggregates, Cem. Concr. Res., 31 (11) (2001), pp. 1587–1591.
[47]. O.M. Jensen, P.F. Hansen, Water-entrained cement-based materials I. Principles and theoretical background, Cem. Concr. Res., 31 (4) (2001), pp. 647–654.
[48]. O.M. Jensen, P.F. Hansen, Water-entrained cement-based materials II. Experimental observations, Cem. Concr. Res., 32 (6) (2002), pp. 973–978
[49]. D.P. Bentz, P. Lura, J.W. Roberts, Mixture proportioning for internal curing, Concr. Int., 27 (2) (2005), pp. 35–40.
[50]. D.P. Bentz, Internal curing of high-performance blended cement mortars, ACI Mater J., 104 (4) (2007), pp. 408–414.
[51]. D.P. Bentz, W.J. Weiss, Internal Curing: a 2010 State-of-the Art Review, National Institute of Standards and Technology (2011)
[52]. J. Castro, L. Keiser, M. Golias, J. Weiss, Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures, Cem. Concr. Compos., 33 (10) (2011), pp. 1001–1008
[53]. B.J. Mohr, L. Premenko, H. Nanko, K.E. Kurtis, Examination of wood-derived powder and fibers for internal curing of cement-based materials, B. Persson, D. Bentz, L.O. Nilsson (Eds.), Proceedings of the 4th International Seminar on Self-desiccation and its Importance in Concrete Technology (2005), pp. 229–244 Gaithersburg, MD
[54]. S. Kawashima, S.P. Shah, Early-age autogenous and drying shrinkage behavior of cellulose fiber-reinforced cementitious materials, Cem. Concr. Compos., 33 (2) (2011), pp. 201–208
[55]. A. Mezencevova, V. Garas, H. Nanko, K. Kurtis, Influence of thermomechanical pulp fiber compositions on internal curing of cementitious materials, J. Mater Civ. Eng., 24 (8) (2012), pp. 970–975
[56]. P. Jongvisuttisun, C. Negrello, K.E. Kurtis, Effect of processing variables on efficiency of eucalyptus pulps for internal curing, Cem. Concr. Compos., 37 (2013), pp. 126–135
[57]. N. Banthia, V. Bindiganavile, F. Azhari, C. Zanotti, Curling control in concrete slabs using fiber reinforcement, J. Test. Eval., 42 (2) (2014), pp. 390–397
[58]. N. Banthia, M. Sappakittipakorn, Z. Jiang, On permeable porosity in bio-inspired fiber reinforced cementitious composites,Int. J. Sustain Mater Struct Sys., 1 (1) (2012), pp. 29–41
[59]. N. Banthia, A. Bhargava, Permeability of stressed concrete and role of fiber reinforcement, ACI Mater J., 104 (1) (2007), pp. 70–76
[60]. N. Banthia, M. Sappakittipakorn, Corrosion of rebar and role of fiber reinforced concrete, J. Test. Eval., 40 (1) (2012), pp. 1–10
[61]. K. Abe, H. Yano, Comparison of the characteristics of cellulose microfibril aggregates of wood, rice straw and potato tuber, Cellulose, 16 (6) (2009), pp. 1017–1023
[62]. K. Abe, S. Iwamoto, H. Yano, Obtaining cellulose nanofibers with a uniform width of 15 nm from wood, Biomacromolecules, 8 (2007), pp. 3276–3278
[63]. A. Alemdar, M. Sain, Isolation and characterization of nanofibers from agricultural residues: wheat straw and soy hulls, Bioresour. Technol., 99 (2008), pp. 1664–1671
[64]. D. Bhattacharya, L.T. Germinario, W.T. Winter, Isolation, preparation and characterization of cellulose microfibers obtained from bagasse, Carbohydr. Polym., 73 (2008), pp. 371–377
[65]. J.I. Morán, V.A. Alvarez, V.P. Cyras, A. Va'zquez, et al., Extraction of cellulose and preparation of nanocellulose from sisal fibers, Cellulose, 2008 (15) (2008), pp. 149–159
[66]. B.M. Cherian, L.A. Pothan, T. Nguyen-Chung, G. Mennig, M. Kottaisamy, S. Thomas, A novel method for the synthesis of cellulose nanofibril whiskers from banana fibers and characterization, J. Agric. Food Chem., 56 (2008), pp. 5617–5627
[67]. B.M. Cherian, A.L. Leáo, S.F. Souza, S. Thomas, L.A. Pothan, M. Kottaisamy, Isolation of nanocellulose from pineapple leaf fibers by steam explosion, Carbohydr. Polym., 81 (2010), pp. 720–725
[68]. S. Beck-Candanedo, M. Roman, D.G. Gray Effect of reaction conditions on the properties and behavior of wood cellulose nanocrystal suspensions, Biomacromolecules, 6 (2005), pp. 1048–1054
[69]. S. Elazzouzi-Hafraoui, Y. Nishiyama, J.-L. Putaux, L. Heux, F. Dubreuil, C. Rochas, The shape and size distribution of crystalline nanoparticles prepared by acid hydrolysis of native cellulose, Biomacromolecules, 9 (2008), pp. 57–65
[70]. D.T. Bergado, P.V. Long, B.R.S. Murthy,A case study of geotextile-reinforced embankment on soft ground, Geotext. Geomembranes, 20 (2002), pp. 343–365.
[71]. R.W. Sarsby, Use of Limited Life Geotextiles (LLGs) for basal reinforcement of embankments built on soft clay, Geotext. Geomembranes, 25 (2007), pp. 302–310.
[72]. M. Segetin, K. Jayaraman, X. Xu, Harakeke reinforcement of soil–cement building materials: manufacturability and properties, Build. Environ., 42 (2007), pp. 3066–3079.
[73]. L.K. Aggarwal, Bagasses-reinforced cement composites, Cem. Concr. Compos., 17 (1995), pp. 107–112.
[74]. H. Binici, O. Aksogan, T. Shah, Investigation of fiber reinforced mud brick as a building material, Constr. Build. Mater, 19 (2005), pp. 313–318.
[75]. H. Binici, O. Aksogan, M.N. Bodur, E. Akca, S. Kapur, Thermal isolation and mechanical properties of fiber reinforced mud bricks as wall materials, Constr. Build. Mater., 21 (2007), pp. 901–906
[76]. J. Khedari, P. Watsanasathaporn, J. Hirunlabh, Development of fiber-based soil–cement block with low thermal conductivity, Cem. Concr. Compos., 27 (2005), pp. 111–116.
[77]. S. Goodhew, R. Griffiths, Sustainable earth walls to meet the building regulation, Energ. Build., 37 (2005), pp. 451–459.
[78]. M. Shehata, M. Navarra, T. Klement, M. Lachemi, H. Schell,Use of wet cellulose to cure shotcrete repairs on bridge soffits. Part 1: Field trials and observations, Can. J. Civ. Eng., 33 (2006), pp. 807–814.
[79]. M. Shehata, M. Navarra, T. Klement, M. Lachemi, H. Schell, Use of wet cellulose to cure shotcrete repairs on bridge soffits. Part 2: Laboratory testing and analysis,Can. J. Civ. Eng., 33 (2006), pp. 815–826.
Vol:13 No:01 2019
Vol:12 No:12 2018Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007