Open Science Research Excellence

Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 29858


Select areas to restrict search in scientific publication database:
4149
Characterization of Fabricated A 384.1-MgO Based Metal Matrix Composite and Optimization of Tensile Strength using Taguchi Techniques
Abstract:
The present work consecutively on synthesis and characterization of composites, Al/Al alloy A 384.1 as matrix in which the main ingredient as Al/Al-5% MgO alloy based metal matrix composite. As practical implications the low cost processing route for the fabrication of Al alloy A 384.1 and operational difficulties of presently available manufacturing processes based in liquid manipulation methods. As all new developments, complete understanding of the influence of processing variables upon the final quality of the product. And the composite is applied comprehensively to the acquaintance for achieving superiority of information concerning the specific heat measurement of a material through the aid of thermographs. Products are evaluated concerning relative particle size and mechanical behavior under tensile strength. Furthermore, Taguchi technique was employed to examine the experimental optimum results are achieved, owing to effectiveness of this approach.
Digital Object Identifier (DOI):

References:

[1] A. Nagelberg, "Observations on the role of mg and si in the directed oxidation of al-mg-si alloys," Journal of materials research, vol. 7, no. 2, 1992, pp. 265-268.
[2] S. Ray, "Synthesis of cast metal matrix particulate composites," Journal of materials science, vol. 28, no. 20,1993, pp. 5397-5413.
[3] J. Hashim, L. Looney, and M. Hashmi, "Metal matrix composites: production by the stir casting method," Journal of Materials Processing Technology, vol. 92, 1999, pp. 1-7.
[4] P. Rohatgi, R. Asthana, and S. Das, "Solidification, structures, and properties of cast metal-ceramic particle composites," International metals reviews, vol. 31, no. 1, 1986, pp. 115-139.
[5] P. Rohatgi, "Cast metal matrix composites: Past, present and future," in Transactions of the American Foundry Society and the One Hundred Fifth Annual Castings Congress; Dallas, TX; USA. American Foundry Society, 505 State St, Des Plaines, IL, 60016-8399, USA,, 2001, pp. 1- 25.
[6] G. Lubin, Handbook of composites. CRC Press, 1998.
[7] S. Jayalakshmi, S. Seshan, S. Kailas, K. Kumar, and S. Srivatsan, "Inuence of processing and reinforcement on microstructure and impact behaviour of magnesium alloy am100," Sadhana, vol. 29, no. 5,2004, pp. 509-523.
[8] K. Kainer, Metal matrix composites. Wiley-VCH Weinheim, 2006.
[9] R. Thimmarayan and G. Thanigaiyarasu, "Effect of particle size, forging and ageing on the mechanical fatigue characteristics of al6082/sic p metal matrix composites," The International Journal of Advanced Manufacturing Technology, vol. 48, no. 5, 2010, pp. 625-632.
[10] D. D. Chung, "Composites materials : functional materials for modren technologies," Springer, vol. 6, 2010, p. 315.
[11] G. Urena, S Gomez de, "Scanning and tem study of the microstructure changes occurring in al matrix composites reinforced with sic during casting and welding: interface reactions." Journal of microscopy, vol. 196(2),1999, pp. 124-136.
[12] G. Requena, "A359/sic/xxp: A 359 al reinfroced with irregularly shaped sic particles." MMC-ASSESS MMC, vol. 10-07, 2007.
[13] A. Khan and I. Qureshi, "Microstructural evaluation of zro2-mgo coatings," Journal of Materials Processing Technology, vol. 209, no. 1,2009, pp. 488-496.
[14] Y. Liu, S. Lim, S. Ray, and P. Rohatgi, "Friction and wear of aluminium-graphite composites: the smearing process of graphite during sliding," Wear, vol. 159, no. 2, 1992, pp. 201-205.
[15] S. Bakhtiyarov and R. Overfelt, "Vacuum-sealed molding process for magnesium casting: Numerical simulations and design of experiments," in Magnesium technology 2003: proceedings of the jointly sponsored by the Magnesium Committee of the Light Metals Division (LMD) and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (the Minerals, Metals & Materials Society) with the International Magnesium Association held during the 2003 TMS Annual Meeting in San Diego, California, USA, March 2-6, 2003,
[16] K. Kashyap, C. Ramachandra, C. Dutta, and B. Chatterji, "Role of work hardening characteristics of matrix alloys in the strengthening of metal matrix composites," Bulletin of Materials Science, vol. 23, no. 1,2000, pp. 47-49.
[17] S. Singh and D. Goel, "Inuence of thermomechanical aging on fatigue behavior of 2014 al-alloy," Bulletin of Materials Science, vol. 28, no. 2, 2005,pp. 91-96.
[18] N. Chandra and H. Ghonem, "Interfacial mechanics of push-out tests: theory and experiments," Composites Part A: Applied Science and Manufacturing, vol. 32, no. 3-4,2001, pp. 575-584.
[19] J. Kunze and C. Bampton, "Challenges to developing and producing mmcs for space applications," JOM Journal of the Minerals, Metals and Materials Society, vol. 53, no. 4, 2001, pp. 22-25.
[20] K. Chawla, Composite materials: science and engineering. Springer Verlag, 1998.
Vol:13 No:07 2019Vol:13 No:06 2019Vol:13 No:05 2019Vol:13 No:04 2019Vol:13 No:03 2019Vol:13 No:02 2019Vol:13 No:01 2019
Vol:12 No:12 2018Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007