Product performance depends on the type and quality of its building material. Successful product must be made using high quality material, and using the right methods. Many foot problems took place as a result of using poor insole material. Therefore, selecting a proper insole material is crucial to eliminate these problems. In this study, the analytical hierarchy process (AHP) is used to provide a systematic procedure for choosing the best material adequate for this application among three material alternatives (polyurethane, poron, and plastzote). Several comparison criteria are used to build the AHP model including: density, stiffness, durability, energy absorption, and ease of fabrication. Poron was selected as the best choice. Inconsistency testing indicates that the model is reasonable, and the materials alternative ranking is effective.
 Chen, W. P., Ju, C. W., Tang, F. T. "Effects of Total Contact Insoles on the Plantar Stress Redistribution: A Finite Element Analysis” Clinical Biomechanics vol.18, pp.17-24, 2003.
 Fontella, C. G., Forestiero, A., Carniel, E. L., Natali, A. N. “Analysis of Heel Pad Tissues Mechanics at the Heel Strike in Bare and Shod Conditions” Medical Engineering & Physics, vol 35, no. 4, 2013.
 Qiu, T. X., Teo, E. C., Yan Y. B., Lei, W. "Finite Element Modeling of a 3D Coupled Foot-Boot Model” Medical Engineering & Physics vol.33, pp.1228-1233, 2011.
 Biomechanics Handout available from: http://atec.utdallas.edu/midori/Handouts/walkingGraphs.htm (accessed 6-5-2-2013).
 Shariatmadari, M. R., Englis, R., Rothell, G. "Effects of Temperature on the Material Characteristics of Midsole and Insole Footwear Foams Subject to Quasi-Static Compressive and Shear Force Loading” Materials and Design vol.3, pp.543-559, 2012.
 Sun, P. C., Wei, H. W., Wu, C. H., Kao, H. C. Cheng, C. K. "Effect of Varying Material Properties on the Load Deformation Characteristics of Heel Cushions” Medical Engineering & Physics vol.30, pp.687-692.
 Gnanasundaram, S., Ranganthan, M., Das, B. N., Mandal, A. B. "Surface Modified and Medicated Polyurethane Materials Capable of Controlling Microorganisms Causing Foot Skin Infection in Athetes” Collids and Surfaces B: Biointerfaces, vol.102, pp.139-145, 2013.
 Searchable database of material properties;1990, available from: http://www.matweb.com / accessed 9-5-2013.
 Jasper, W. K., Eddie, Y. K. "Preliminary Investigation on the Reduction of Plantar Loading Pressure with Different Insole materials (SRP – Slow Recovery Poron, P-Poron, PPF-Poron + plastazote, firm and PPS-Poron+plastazote,soft)”The Foot vol. 20, pp.1-6, 2010.
 Cheung, J. T., Zhang. M. "Parametric Design of Pressure-Relieving Foot Orthosis Using Statistics-Based Finite Element Method" Medical Engineering Physics vol. 30, no. 3, pp. 269-277, 2008.
 Erbasi, A., Can, A., Cinar, K. "The Use of the AHP Method in the Selection of the Most Appropriate Production Materials by Business: A Sample Study on Tractor Body materials" Advanced Management Science vol. 1, No.1, 2013.
 Milani, A. S., Shanian, A., Lynam, C., Scarinci, T. "An Application of the Analytic Network Process in Multiple Criteria Material Selection" Material & Design vol. 44, pp.622-632, 2013.
 Rao, R. V. "A Decision Making Methodology for Material Selection Using an Improved Compromise Ranking Method" Materials & Design vol.29, pp.1949-1954, 2008.