Open Science Research Excellence

Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 29725

Select areas to restrict search in scientific publication database:
Some Design Issues in Designing of 50KW 50Krpm Permanent Magnet Synchronous Machine
A numbers of important developments have led to an increasing attractiveness for very high speed electrical machines (either motor or generator). Specifically the increasing switching speed of power electronics, high energy magnets, high strength retaining materials, better high speed bearings and improvements in design analysis are the primary drivers in a move to higher speed. The design challenges come in the mechanical design both in terms of strength and resonant modes and in the electromagnetic design particularly in respect of iron losses and ac losses in the various conducting parts including the rotor. This paper describes detailed design work which has been done on a 50,000 rpm, 50kW permanent magnet( PM) synchronous machine. It describes work on electromagnetic and rotor eddy current losses using a variety of methods including both 2D finite element analysis
Digital Object Identifier (DOI):


[1] M. A. Rahman, A. Chiba, and T. Fukao, "Super high speed electrical machines - summary," presented at Power Engineering Society General Meeting, 2004. IEEE, 2004.
[2] W. Jiqiang, W. Fengxiang, and Y. Tao, "Analysis of rotor losses for a high speed PM generator," Electrical Machines and Systems. ICEMS, vol. 2, pp. 889 - 892, 2005.
[3] F. Wang, M. Zong, W. Zheng, and E. Guan, "Design features of high speed PM machines," presented at Electrical Machines and Systems, 2003. ICEMS 2003. Sixth International Conference on, 2003.
[4] A. A. Pride and P. R. Evison, "100 to 140krpm PM motor / generators for EV applications," presented at Electrical Machine Design for All- Electric and Hybrid-Electric Vehicles (Ref. No. 1999/196), IEE Colloquium on, 1999.
[5] W. Fengxiang, Z. Wenpeng, Z. Ming, and W. Baoguo, "Design considerations of high-speed PM generators for micro turbines," presented at Power System Technology, 2002. Proceedings. PowerCon 2002. International Conference on, 2002.
[6] N. Bianchi, S. Bolognani, and F. Luise, "Potentials and limits of highspeed PM motors," Industry Applications, IEEE Transactions on, vol. 40, pp. 1570-1578, 2004.
[7] D. T. D. E. Hesmondhalg, and M. Amrani, "Design and construction of a high-speed high performance direct-drive handpiece," 1987.
[8] Z. Q. Zhu, K. Ng, and D. Howe, "Design and analysis of high-speed brushless permanent magnet motors," presented at Electrical Machines and Drives, 1997 Eighth International Conference on (Conf. Publ. No. 444), 1997.
[9] L. Zhao, C. H. Ham, T. X. Wu, L. Zheng, K. B. Sundaram, J. Kapat, and L. Chow, "A DSP-based super high-speed PMSM controller development and optimization," presented at Digital Signal Processing Workshop, 2004 and the 3rd IEEE Signal Processing Education Workshop. 2004 IEEE 11th, 2004.
[10] L. Xu and C. Wang, "Implementation and experimental investigation of sensorless control schemes for PMSM in super-high variable speed operation," presented at Industry Applications Conference, 1998. Thirty- Third IAS Annual Meeting. The 1998 IEEE, 1998.
[11] Binder, T. Schneider, and M. Klohr, "Fixation of buried and surface mounted magnets in high-speed permanent magnet synchronous motors," presented at Industry Applications Conference, 2005. Fourtieth IAS Annual Meeting. Conference Record of the 2005, 2005.
[12] S. B. N. Bianchi, and F. Luise, "Analysis and design of a brushless motor for high speed operation," presented at Conf. Rec. IEEE Int. Electric Machines and Drive, IEMDC'03 Madison, WI, 2003.
[13] G. J. Atkinson;B. C. Mecrow;A. G. Jack;D. J. Atkinson;B. Green. The influence of stator design on the performance of fault tolerant machines. 16th International Conference on Electrical Machines. Conference Proceedings. Institute of Mechatronics and Information Systems. 2004 2004, pp 6.
[14] R. Hall "The design of high temperature electrical machines for aerospace application", university of Newcastle upon tyne. Ph.D. Thesis, August 2005.
Vol:13 No:06 2019Vol:13 No:05 2019Vol:13 No:04 2019Vol:13 No:03 2019Vol:13 No:02 2019Vol:13 No:01 2019
Vol:12 No:12 2018Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007