Excellence in Research and Innovation for Humanity

International Science Index


Select areas to restrict search in scientific publication database:
10008821
Experimental and Simulation Stress Strain Comparison of Hot Single Point Incremental Forming
Abstract:
Induction assisted single point incremental forming (IASPIF) is a flexible method and can be simply utilized to form a high strength alloys. Due to the interaction between the mechanical and thermal properties during IASPIF an evaluation for the process is necessary to be performed analytically. Therefore, a numerical simulation was carried out in this paper. The numerical analysis was operated at both room and elevated temperatures then compared with experimental results. Fully coupled dynamic temperature displacement explicit analysis was used to simulated the hot single point incremental forming. The numerical analysis was indicating that during hot single point incremental forming were a combination between complicated compression, tension and shear stresses. As a result, the equivalent plastic strain was increased excessively by rising both the formed part depth and the heating temperature during forming. Whereas, the forming forces were decreased from 5 kN at room temperature to 0.95 kN at elevated temperature. The simulation shows that the maximum true strain was occurred in the stretching zone which was the same as in experiment.
Digital Article Identifier (DAI):

References:

[1] J. Duflou, B. Callebaut, J. Verbert, and H. De Baerdemaeker, “Laser assisted incremental forming: formability and accuracy improvement,” CIRP Annals-Manufacturing Technology, vol. 56, no. 1, pp. 273–276, 2007.
[2] A. Göttmann, J. Diettrich, G. Bergweiler, M. Bambach, G. Hirt, P. Loosen, and R. Poprawe, “Laser-assisted asymmetric incremental sheet forming of titanium sheet metal parts,” Production Engineering, vol. 5, no. 3, pp. 263–271, 2011.
[3] H. Meier and C. Magnus, “Incremental sheet metal forming with direct resistance heating using two moving tools,” in Key Engineering Materials, vol. 554. Trans Tech Publ, 2013, pp. 1362–1367.
[4] K. Mori, S. Maki, and Y. Tanaka, “Warm and hot stamping of ultra high tensile strength steel sheets using resistance heating,” CIRP Annals-Manufacturing Technology, vol. 54, no. 1, pp. 209–212, 2005.
[5] G. Fan, F. Sun, X. Meng, L. Gao, and G. Tong, “Electric hot incremental forming of ti-6al-4v titanium sheet,” The International Journal of Advanced Manufacturing Technology, vol. 49, no. 9, pp. 941–947, 2010.
[6] X. Shi, L. Gao, H. Khalatbari, Y. Xu, H. Wang, and L. Jin, “Electric hot incremental forming of low carbon steel sheet: accuracy improvement,” The International Journal of Advanced Manufacturing Technology, vol. 68, no. 1-4, pp. 241–247, 2013.
[7] A. Al-Obaidi, V. Kräusel, and D. Landgrebe, “Hot single-point incremental forming assisted by induction heating,” The International Journal of Advanced Manufacturing Technology, vol. 82, no. 5-8, pp. 1163–1171, 2016.
[8] S. Kim, Y. Lee, Y. Kwon, and J. Lee, “A study on warm incremental forming of az31 alloy sheet,” Transactions of Materials Processing, vol. 17, no. 5, pp. 373–379, 2008.
[9] G. Fan and L. Gao, “Numerical simulation and experimental investigation to improve the dimensional accuracy in electric hot incremental forming of ti–6al–4v titanium sheet,” The International Journal of Advanced Manufacturing Technology, vol. 72, no. 5-8, pp. 1133–1141, 2014.
[10] J. Belchior, L. Leotoing, D. Guines, E. Courteille, and P. Maurine, “A process/machine coupling approach: application to robotized incremental sheet forming,” Journal of Materials Processing Technology, vol. 214, no. 8, pp. 1605–1616, 2014.
[11] A. Al-Obaidi, V. Kräusel, and D. Landgrebe, “Improvement of formability in single point incremental forming of dp1000 steel aided by induction heating.” Applied Mechanics & Materials, vol. 794, 2015.
[12] H. P. William, A. T. Saul, T. V. William, and P. Flaneery Brian, Numerical Recipes in C - The Art of Scientific Computing. Cambridge University Press, 1992.
[13] C. Bouffioux, C. Lequesne, H. Vanhove, J. Duflou, P. Pouteau, L. Duchêne, and A. Habraken, “Experimental and numerical study of an almgsc sheet formed by an incremental process,” Journal of Materials Processing Technology, vol. 211, no. 11, pp. 1684–1693, 2011.
[14] P. Martins, N. Bay, M. Skjødt, and M. Silva, “Theory of single point incremental forming,” CIRP Annals-Manufacturing Technology, vol. 57, no. 1, pp. 247–252, 2008.
[15] A. Mohammadi, H. Vanhove, A. Van Bael, and J. R. Duflou, “Towards accuracy improvement in single point incremental forming of shallow parts formed under laser assisted conditions,” International Journal of Material Forming, vol. 9, no. 3, pp. 339–351, 2016.
[16] A. Al-Obaidi, V. Kräusel, and D. Landgrebe, “Induction heating validation of dieless single-point incremental forming of ahss,” Journal of Manufacturing and Materials Processing, vol. 1, no. 1, p. 5, 2017.
Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007