Excellence in Research and Innovation for Humanity

International Science Index


Select areas to restrict search in scientific publication database:
10007599
Laser Registration and Supervisory Control of neuroArm Robotic Surgical System
Abstract:
This paper illustrates the concept of an algorithm to register specified markers on the neuroArm surgical manipulators, an image-guided MR-compatible tele-operated robot for microsurgery and stereotaxy. Two range-finding algorithms, namely time-of-flight and phase-shift, are evaluated for registration and supervisory control. The time-of-flight approach is implemented in a semi-field experiment to determine the precise position of a tiny retro-reflective moving object. The moving object simulates a surgical tool tip. The tool is a target that would be connected to the neuroArm end-effector during surgery inside the magnet bore of the MR imaging system. In order to apply flight approach, a 905-nm pulsed laser diode and an avalanche photodiode are utilized as the transmitter and receiver, respectively. For the experiment, a high frequency time to digital converter was designed using a field-programmable gate arrays. In the phase-shift approach, a continuous green laser beam with a wavelength of 530 nm was used as the transmitter. Results showed that a positioning error of 0.1 mm occurred when the scanner-target point distance was set in the range of 2.5 to 3 meters. The effectiveness of this non-contact approach exhibited that the method could be employed as an alternative for conventional mechanical registration arm. Furthermore, the approach is not limited by physical contact and extension of joint angles.
Digital Article Identifier (DAI):

References:

[1] Y. Maddahi, K. Zareinia, L. S. Gan, S. Lama, G. R. Sutherland, and N. Sepehri, “Positional and force characteristics of neuroArm robotic manipulators: A pilot study,” Int. Conf. of Control, Dynamic Systems, and Robotics, Ottawa, Canada, 2015.
[2] G. R. Sutherland, I. Latour, and A. D. Greer, “Integrating an image guided robot with intaroperative MRI: A review of design and construction,” IEEE Eng. Med. Biol., vol. 27, pp. 59–65, 2008.
[3] Y. Maddahi, L. S. Gan, K. Zareinia, S. Lama, N. Sepehri, and G. R. Sutherland, “Quantifying workspace and forces of surgical tools during robot-assisted neurosurgery,” Int. J. Med. Robotics Comput. Assist. Surg., vol. 12, no. 3, pp. 528–37, 2016.
[4] A. D. Greer, P. Newhook, and G. R. Sutherland, “Human-machine interface for Robotic Surgery and Stereotaxy,” IEEE/ASME Trans. on MRI Compatible Mechatronic Systems, vol. 13, pp. 355–361, 2008.
[5] Y. Maddahi, K. Zareinia K, L. S. Gan, S. Lama, G. R. Sutherland, N. Sepehri, “Positional and force characteristics of neuroArm robotic manipulators: a pilot study.,” in Proc. Intern. Conf. of Control, Dynamic Systems and Robotics, Ottawa, 2015.
[6] M. C. Amann, T. Bosch, M. Lescure, R. Myllyla, M. Rioux, “Laser ranging: a critical review of usual techniques for distance measurement”, Opt. Eng., vol. 40, no. 1, pp. 10–19, 2001.
[7] Y. Bae, “An Improved Measurement Method for the Strength of Radiation of Reflective Beam in an Industrial Optical Sensor Based on Laser Displacement Meter”, Sensors, vol. 16, no. 5, pp. 752, 2016.
[8] S. Mohammad Nejad and S. Olyaee, “Comparison of TOF, FMCW and phase-shift laser range finding methods by simulation and measurement,” J. Tech. Educ., vol. 1, no. 1, pp. 11–18, 2006.
[9] S. Mohammad Nejad and S. Olyaee, “Low-noise high-accuracy TOF laser range finder,” Am. J. Appl. Sci., vol. 5-7, pp. 755–762, 2008.
[10] S. Mohammad Nejad and S. Olyaee, “Unified pulsed laser range finder and velocimeter using ultra-fast time-to-digital converter,” Iranian J. Elect. Electron. Eng., vol. 5, no. 2, pp. 112–121, 2009.
[11] Photon Detection Datasheet, C30659 Series-Rev.1.1, pp. 1–10, 2013. www.excelitas.com.
[12] J. Song, Q. An, and S. Liu, “A high-resolution time-to-digital converter implemented in field-programmable-gate-arrays,” IEEE Trans. Nuclear Science, vol. 53, no. 1, pp. 236–241, 2006.
[13] M. C. Lin, G. R. Tsai, C. Y. Liu, and S. S. Chu, “FPGA-based high area efficient time-to-digital IP design,” in TENCON IEEE Region 10 Conf., Hong Kong, 2006, pp. 1–4.
[14] M. P. Mattada, and H. Guhilot, “Area efficient vernier time to digital converter (TDC) with improved resolution using identical ring oscillators on FPGA,” in IEEE Int. Conf. Smart Struct. Syst. (ICSSS), Chennai, 2013, pp. 125–130.
[15] J. Wang, S. Liu, Q. Shen, H. Li, and Q. An, “A fully fledged TDC implemented in field¬programmable-gate-arrays,” IEEE Trans. Nuclear Science, vol. 57, no. 2, pp. 446–450, April 2010.
[16] J. Kostamovaara, S. Kurtti, and J. P. Jansson, “A receiver – TDC chip set for accurate pulsed Time-of-flight laser ranging,” CDNLive EMEA Conf. Proc., Munich, 2012.
[17] F. Zhong, L. Wan, and Y. Yue, “High-precision interval measuring chip TDC-GP2 in accurate distance measuring,” Comp. Indust. Control, vol. 4, pp. 69–72, 2007.
[18] A. Aloisio, P. Branchini, R. Cicalese, R. Giordano, V. Izzo, and S. Loffredo, “FPGA implementation of a high-resolution time-to-digital converter,” in IEEE Nuclear Science Symposium Conference Record, 2007, pp. 504–507.
[19] J. Kalisz, R. Szplet, J. Pasierbinski, and A. Poniecki, “Field programmable gate array based time-to-digital converter with 200-ps resolution”, IEEE Trans. Instrum. Meas., vol. 46, no.1, pp 51–55, Feb. 1997.
[20] P. Dudek, S. Szezepanski, and J. Hatfield, “A high resolution CMOS time-to-digital converter utilizing a Vernier delay loop,” IEEE Trans. Solid State Circuits, vol. 35, no. 2, pp. 240–247, 2000.
[21] S. Poujouly, B. Journet and D. Placko, “Digital laser range finder: phase-shift estimation by undersampling technique,” Indust. Electron. Society, The 25th Annu. Conf. IEEE, San Jose, CA, vol. 3, 1999, pp. 1312–1317.
[22] T. Y. Cossetto, K. Zareinia and G. R. Sutherland, “Neurosurgery,” in Surgical Robotics, vol. 3, P. Gomes, Ed. Cambridge: Wood Head Publishing Ltd., pp. 59-77, 2012.
[23] G. R. Sutherland, S. Wolfsberger, S. Lama, K. Zareinia. “The Evolution of neuroArm,” Neurosurgery, vol. 72, pp. A27–A32, 2013.
[24] A. Mert, L. S. Gan, E. Knosp, G. R. Sutherland, S. Wolfsberger, “Advanced Cranial Navigation,” Neurosurgery, vol. 72, pp. A43-A53, 2013.
Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007