Dubai, December 17-18, 2020 Conference Program

Scholarly Integrity Remarks:

1)Authors must be ready in the meeting room at least 10 minutes prior to the start of the session. Presenters must introduce themselves to the session chair(s) and upload their Oral and ePoster presentations to the computer.

2)Authors must be able to present on any day of the conference – the program cannot be tailored around specific requests from individual authors to present on particular days.

3)The international research conference program is designed for original research contributions and presentations in all research fields. Presentations scheduled in the Oral and ePoster sessions are drawn from a selection of the peer reviewed papers from a wide range of scientific and other disciplines of inquiry.

DECEMBER 17-18, 2020: DIGITAL PROGRAM

DAY 1: VIRTUAL MEETING
The digital presentation session will start at 12 p.m. (midday) on December 17, 2020 London local time. The link to join the virtual conference will be available for registered delegates 10 minutes before the session at https://waset.org/profile/messages.

DAY 2: PERTINENT READING
Digital program consists of an e-book of relevant studies to download for future reading on December 18, 2020.

Digital Program consists of the e-proceedings book which is available online-only and includes the conference communications (proceedings abstracts and papers). Registered participants can access the digitally available conference proceedings ( and certificates ) by visiting their profile pages.

MEDICAL AND HEALTH SCIENCES RESEARCH

Chair: Sana Khedher, Natalie Archer

Thrombolysis in a Patient with Cardio Embolic Stroke with Left Atrial Myxoma and Positive COVID-19

Narjes Mokni, Sana Khedher, Beshir Igile, Hani Al Khalaf, Hassen M. Al Dossary; Saudi Arabia
Research Area: Medical and Health Sciences

Non-Invasive Respiratory Support in the COVID-19 Patients with Acute Respiratory Failure

Sana Khedher, Ahmed Sarsout, Mohamed El Safty, Hani Al Khalaf, Hassen M. Al Dossary; Saudi Arabia
Research Area: Medical and Health Sciences

Impact of Implementation of Stroke Protocol to Improve Door to Needle Time

Narjes Mokni, Sana Khedher, Beshir Igile, Hani Al Khalaf, Hassen M. Al Dossary; Saudi Arabia
Research Area: Medical and Health Sciences

Clinico-pathological Presentation of Fanconi Anemia in Pakistani Patients: a Single Centre Study.

Saima Siddiqui, Tahir Shamsi, Saqib Ansari; Pakistan
Research Area: Medical and Health Sciences

Scientific Research on the Influence of Muscle Activation Time of the Tibialis Anterior and Medial Gastrocnemius on the Mechanics of the First Metatarsal in Taekwondo and Wushu Sword

Lorenzo Andaloro; Italy
Research Area: Health and Medical Engineering

Prevalence of Depressive Symptoms among Ungraduated Medical Students

Nikola Milenkovic, Natasa Rancic, Miodrag Stojanovic, Biljana Kocic; Serbia
Research Area: Biomedical and Biological Engineering

Proprotein Convertase Subtilisin/Kexin Type 9 Enhances Arterial Medial Calcification in a Uremic Rat Model of Chronic Kidney Disease

Maria Giovanna Lupo, Marina Camera, Marcello Rattazzi, Nicola Ferri; Italy
Research Area: Medical and Health Sciences

Compassion fatigue, burnout, and response to stress among trauma and orthopedic nursing staff in South Wales

Salam Ismael, Huw Williams, Prof Andrew Smith ; United Kingdom
Research Area: Nursing and Health Sciences

Effect of Smoking on Tear Break-Up Time and Basal Tear Secretion

Kalsoom Rani; Oman
Research Area: Medical and Health Sciences

Mycoplasma Pneumonia Associated with Autoimmune Hemolytic Anemia in Patient with Thalassemia Major

Maryam O. Ali, Fatheya Alkhaja, Hany Dewedar ; United Arab Emirates
Research Area: Medical and Health Sciences

A Retrospective Study to Identify the Compliance with Sdcep Guidelines of Exodontia Patients Taking Oral Anticoagulant and Antiplatelet Medication

Natalie Archer, Monica Patel, Anita Ghei, Yogesh Bulsara; United Kingdom
Research Area: Medical and Health Sciences

Prevalence of Methylenetetrahydrofolate Reductase A1298C Variant in Tunisian Childhood Acute Lymphoblastic Leukemia

Rim Frikha, Maha Ben Jema, Moez Elloumi, Tarek Rebai; Tunisia
Research Area: Bioengineering and Life Sciences

Chair: Marija Molan

Identification of Gripping Points to Keep Efficiency of Workers with Implementation of Cart Analysis

Gregor Molan, Marija Molan; Slovenia
Research Area: Industrial and Systems Engineering

Chair: Hayyan I Al Taweil

Bacterial Contamination of Kitchen Sponges and Cutting Surfaces and Disinfection Procedures

Hayyan I Al Taweil; Saudi Arabia
Research Area: Biomedical and Biological Engineering

Molecular Characterization of circulating Rabies Virus and Knowledge Attitude Practice in Uganda

Michael Omodo; Uganda
Research Area: Biomedical and Biological Engineering

Eugenol Effects on Metabolic Syndrome Induced Liver Damages

Fatemeh Kourkinejad Gharaei, Tahereh Safari, Zahra Saebinasab; Iran
Research Area: Bioengineering and Life Sciences

Development of Checklist for Evaluation of Fire Safety in a High Rise Tertiary Care Hospital of Premier Medical Research Institute of India

Neerav Koherwal, Gopal C Misra, Shakti Kumar Gupta, Sanjay Kumar Arya; India
Research Area: Health and Medical Engineering

Updates of Nursing Practice Guideline for Pressure Injury in Korea

Jung Yoon Kim; Korea, South
Research Area: Nursing and Health Sciences

A Systematic Review of Intensive Care Service after Discharge on Patient's Outcomes

Piyarat Srila, Kanyanat Nimnoi, Charinya Moongkoon, Wannapa Konkhen, Jiraporn Sinjuntuek, Piyachat Chumchuen, Ong-Orn Jaichaiyaphum, Pataraporn Kheawwhan; Thailand
Research Area: Nursing and Health Sciences

A Systematic Review of Hip Fracture Patient's Discharge

Doungkamol Paenthai, Thatcharin Walaiwiboonsanti, Porntipa Phankam, Pimchanok Srithongde, Wiporn Amornsiriarporn, Petcharin Aruksutthi; Thailand
Research Area: Nursing and Health Sciences

Exploring Factors Related to Unplanning Readmission of Elderly Patients in Taiwan

Hui-Yen Lee, Hsiu-Yun Wei, Guey-Jen Lin, Pi-Yueh Lee Lee; Taiwan
Research Area: Nursing and Health Sciences

An Investigation of the Relevant Factors of Unplanned Readmission within 14 Days of Discharge in a Regional Teaching Hospital in South Taiwan

Xuan Hua Huang, Shu Fen Wu, Yi Ting Huang, Pi Yueh Lee; Taiwan
Research Area: Nursing and Health Sciences

Rapid Weight Loss in Athletes: A Look at Suppressive Effects on Immune System

Nazari Maryam, Gorji Saman; Iran
Research Area: Bioengineering and Life Sciences

Prevailing Clinical Evidence on Medicinal Hemp (Cannabis Sativa L.)

Siti Hajar Muhamad Rosli, Xin Yi Lim, Terence Yew Chin Tan, Muhammad nor Farhan Sa’At, Syazwani Sirdar Ali, Ami Fazlin Syed Mohamed ; Malaysia
Research Area: Mathematical and Computational Sciences

Medicinal Hemp Research: Trends, Gaps, and Challenges

X.Y. Lim, T.Y.C. Tan, S.H. Muhd Rosli, M.N.F. Sa’at, S. Sirdar Ali, A.F. Syed Mohamed; Malaysia
Research Area: Mathematical and Computational Sciences

Preclinical Evidence of Pharmacological Effect from Medicinal Hemp

Muhammad nor Farhan Sa'At, Xin Y. Lim, Terence Y. C. Tan, Siti Hajar M. Rosli, Syazwani S. Ali, Ami F. Syed Mohamed; Malaysia
Research Area: Mathematical and Computational Sciences

Chair: Safia Serai

An Investigation of Translanguaging in the Algerian University EFL Classrooms

Safia Serai; United Kingdom
Research Area: Educational and Pedagogical Sciences

A Corpus-Based Analysis of Japanese Learners' English Modal Auxiliary Verb Usage in Writing

S. Nakayama; Japan
Research Area: Educational and Pedagogical Sciences

Student Motivation in Learning Igbo as a Second Language

Joyce Ifeoma Obidiebube; Nigeria
Research Area: Educational and Pedagogical Sciences

Effective Pedagogy: Film as a Pedagogical Tool for Teaching South Asian Languages

Mohammad Jahangeer Warsi; India
Research Area: Educational and Pedagogical Sciences

Technology in English Language Teaching and Its Benefits in Improving Language Skills

Yasir Naseem; India
Research Area: Educational and Pedagogical Sciences

Arabic in the UAE: Challenges and Solutions

Anne Raynor, Abir Ahmed; United Arab Emirates
Research Area: Humanities and Social Sciences

Altasreef: Automated System of Quran Verbs for Urdu Language

Haq Nawaz, Muhammad Amjad Iqbal, Kamran Malik; Pakistan
Research Area: Humanities and Social Sciences

Factors Promoting French-English Tweets in France

Taoues Hadour ; United States
Research Area: Cognitive and Language Sciences

A Phonological Analysis in Optimality Theory of Iquito Tone System

Wanqing He; United States
Research Area: Cognitive and Language Sciences

Coca-Cola or Tasty Fun: Translation Principles and Standards of Chinese Borrowed Words

Zekai Tian; China
Research Area: Cognitive and Language Sciences

Pictorial Multimodal Analysis of Selected Paintings of Salvador Dali

Shaza Melies, Abeer Refky, Nihad Mansoor; Egypt
Research Area: Cognitive and Language Sciences

Chair: Ilham Sadoqi, Cinzia Valente

Frontiers of Migration in Morocco: Potentials and Constraints of Intercultural Citizenship

Ilham Sadoqi; Morocco
Research Area: Humanities and Social Sciences

Relation Between STEM Attitude and Empowerment: A Descriptive Study in Young Girls from Costa Rica

Joselyn Rodriguez-Gonzalez; Costa Rica
Research Area: Humanities and Social Sciences

The Battle for Influence: Sexual Assault Victims on Which Platforms Best Enable Their Fight for Justice

Anat Peleg; Israel
Research Area: Social and Business Sciences

Black Lives Matter: An Analysis of the Burning Debate over Attitudes on Skin Tones of Women in India

Z. Injela; India
Research Area: Humanities and Social Sciences

Employing Motivation, Enjoyment and Self-Regulation to Predict Aural Vocabulary Knowledge

Seyed Mohammad Reza Amirian, Seyedeh Khadije Amirian, Maryam Sabouri; Iran
Research Area: Educational and Pedagogical Sciences

A Literature Review on the Use of Information and Communication Technology within and between Emergency Medical Teams during a Disaster

Badryah Alshehri, Kevin Gormley, Gillian Prue, Karen McCutcheon; United Kingdom
Research Area: Environmental and Ecological Engineering

Analyzing the Use of Augmented and Virtual Reality to Teach Social Skills to Students with Autism

Maggie Mosher, Adam Carreon, Sean Smith; United States
Research Area: Educational and Pedagogical Sciences

Sociocultural Integration of Bilingualism and Biliteracy of Emiratis: Exploratory Study in a Group of Fifth-Grade Students

Aysha S. Alshamsi, Negmeldin O. Alsheikh; United Arab Emirates
Research Area: Educational and Pedagogical Sciences

The Pedagogical Integration of Digital Technologies in Initial Teacher Training

Vânia Graça, Paula Quadros-Flores, Altina Ramos ; Portugal
Research Area: Educational and Pedagogical Sciences

Institutional Logic of Wage Slavery

Promotosh Barua; Finland
Research Area: Law and Political Sciences

Consumer Protection in Islam

Mina Elhjouji ; Morocco
Research Area: Law and Political Sciences

Inconclusive Election and Credibility on Electoral Process: Implication for Democratic Nigeria

A. A. Ebini Kana; Nigeria
Research Area: Law and Political Sciences

Restorative Justice from the Judicial Perspective

D. Avnieli; Israel
Research Area: Law and Political Sciences

Final Costs of Civil Claims

Behnam Habibi Dargah; Iran
Research Area: Law and Political Sciences

Main Problematic Aspects of The Modern Judicial System

Vera Kapatsina; Kazakhstan
Research Area: Law and Political Sciences

Unaccompanied Children: An Overview on National and European Law

Cinzia Valente ; Italy
Research Area: Law and Political Sciences

The Need to Enhance Online Consumer Protection in KSA

Abdulrahman Aloufi; Australia
Research Area: Law and Political Sciences

Substance Abuse, Sexual Violence, and Help-Seeking Behavior: Social Club Memberships, Sexually Transmitted Diseases, and Stress

Thomas Li-Ping Tang, Toto Sutarso; United States
Research Area: Health and Medical Engineering

Chair: Nora Gavira Duron, Anne Lemnitzer

Determining Variables in Mathematics Performance According to Gender in Mexican Elementary School

Nora Gavira Duron, Cinthya Moreda Gonzalez-Ortega, Reyna Susana Garcia Ruiz; Mexico
Research Area: Humanities and Social Sciences

Out of the Closet: Transgressive Representations of Queer Intimacy in Filipino Mainstream Media

Darel Magramo; Philippines
Research Area: Humanities and Social Sciences

The Dynamics and the Diversity of Women’s Experience with Regard to Marriage in the Select Short Stories of Katherine Mansfield and Binapani Mohanty: A Comparative Study

Chinmayee Nanda; India
Research Area: Humanities and Social Sciences

A Tool to Measure Women’s Empowerment in Feminist Groups: Collaborative Research with Bembé Batucada, an Only Women Drummer’s Group Based in Granada

Ainoa Navarro Amezcua; United Kingdom
Research Area: Humanities and Social Sciences

Gender Gaps in Public Funding of Peruvian Cinema

Fabiola Reyna; Spain
Research Area: Humanities and Social Sciences

Theoretical Analysis of the Gender Perspective in Alice in Wonderland

Maria Fernandez Hernandez; Spain
Research Area: Humanities and Social Sciences

Interrogating Pedagogical Practices: The Critical Use of Self-Reflection on Issues of Diversity and Inclusion through Art

A. Allen; United States
Research Area: Educational and Pedagogical Sciences

Examining E-Government Impact Using Public Value Approach: A Case Study in Pakistan

Shahid Nishat, Keith Thomas; Australia
Research Area: Law and Political Sciences

Italy’s Holocaust: A Balanced History

Cam Telch; Canada
Research Area: Humanities and Social Sciences

The Determinants of Urban Poverty in Saudi Arabia: Evidence from a Socio-Economic Household Survey

Miriam Al Lily, Hermann Waibel; Germany
Research Area: Economics and Management Engineering

A Study of Tabatabai's Inclusivism on Religious Diversity

Abbas Yazdani; Iran
Research Area: Humanities and Social Sciences

Post-Traumatic Stress Disorder: Management at the Montfort Hospital

Kay-Anne Haykal, Issack Biyong; Canada
Research Area: Psychological and Behavioral Sciences

Geotechnical Education in the USA: A Comparative Analysis of Academic Schooling vs. Industry Needs in the Area of Earth Retaining Structures

Anne Lemnitzer, Eric Tavarez; United States
Research Area: Urban and Civil Engineering

Iraqi Media Entrepreneurs across Social Media: Factors and Challenges

Ahmed Omar Bali, Sherko Jabar, Hazhar Jalal, Mahdi Sofi-Karim; Iraq
Research Area: Social and Business Sciences

What Else after All Those Suffers? The Case of Ethiopian Female Domestic Workers in Lebanon

Parisa Nasrabadi; Sweden
Research Area: Law and Political Sciences

Chair: Ghada Haddad

Islamic Banking in Ghana: Prospects and Challenges

Shaibu Ali, Sherif Heiman Shaban, Musah Ismaila, Imoro Alhassan, Yusif Ali; Ghana
Research Area: Economics and Management Engineering

Gender Diversity in High Performance Organizations: An Empirical Study in France, India and the Usa

Ghada Haddad, Tim Pett, Laurent Sie; France
Research Area: Economics and Management Engineering

Well-Being in the Workplace: Do Christian Leaders Behave Differently?

Mariateresa Torchia, Helene Cristini, Hannele Kauppinen; Monaco
Research Area: Social and Business Sciences

Virtue Ethics as a Corrective to Mismanagement of Resources in Nigeria’s Economy: Akwa Ibom State Experience

Veronica Onyemauwa; Nigeria
Research Area: Social and Business Sciences

Study on the Stages of Knowledge Flow in Central Libraries of Tehran Universities by the Pattern of American Productivity & Quality Center

Amir Reza Asnafi, Ehsan Tajabadi, Mohsen Hajizeinolabedini; Iran
Research Area: Information and Communication Engineering

Collaboration-Based Islamic Financial Services: Case Study of Islamic Fintech in Indonesia

Erika Takidah, Salina Kassim; Indonesia
Research Area: Economics and Management Engineering

Effect of Strategy Orientation on Small and Medium Enterprises Performance in Northcentral Nigeria

Muhammad Keffi Mallami; Nigeria
Research Area: Social and Business Sciences

Chair: Ingrida Radveikiene, Fahad Al Shidi

Purification, Characterization and Immobilization of Laccase from Lithothelium sp.

Ingrida Radveikiene, Regina Vidziunaite; Lithuania
Research Area: Biotechnology and Bioengineering

The Effect of CuO, Mo, Bo, SiO2 Nanoparticles and Agrometeorological Drought Stress on Growth Parameters of Pea (Pisum Sativum)

Ruta Paulauskaite, Jurga Miliauskiene, Lina Rageliene; Lithuania
Research Area: Agricultural and Biosystems Engineering

Influence of Magnetic Bio-Stimulation Effects on Pre-Sown Hybrid Sunflower Seeds Germination, Growth, and on the Percentage of Antioxidant Activities

Nighat Zia-ud-Den, Shazia Anwer Bukhari; Pakistan
Research Area: Agricultural and Biosystems Engineering

Environmental Response and Ph Tolerance of Induced Co2 In Ulva Rigida (Chlorophyta) Under Controlled Conditions

Albert O. Amosu, Deborah V. Robertson-Andersson, Jared L.Knapp, Gavin W Maneveldt, Lutz Auersward, John J. Bolton; Nigeria
Research Area: Marine and Environmental Sciences

Does Trade and Institutional Quality Play Any Significant Role on Environmental Quality in Sub-Saharan Africa?

Luqman Afolabi; Uganda
Research Area: Economics and Management Engineering

Assessment of the Factors Determining Environmental Pollution in Agriculture: the Case of Selected European Countries

Astrida Miceikiene, Ricardas Krikstolaitis, Ausra Nausediene; Lithuania
Research Area: Economics and Management Engineering

Super Mario Guide: An Updated Roadmap on Research with Travel Subjective Well-Being

Wu Hu; China
Research Area: Economics and Management Engineering

Distribution and Characterization of Thermal Springs in Northern Oman

Fahad Al Shidi, Reginald Victor; Oman
Research Area: Environmental and Ecological Engineering

Application of Combined Geophysical Methods in Investigation of Foundation Failure: A Case Study of Differential Settlement of Buildings in Edunabon, Southwestern Nigeria

Olukole Adedeji Akinbiyi, Andrew Sunday Oji, John Lazarus Ugwoke; Nigeria
Research Area: Environmental and Ecological Engineering

Artificial Intelligence Methods in Estimating the Minimum Miscibility Pressure Required for Gas Flooding

Emad A. Mohammed; Saudi Arabia
Research Area: Chemical and Materials Engineering

Geophysical Assessment of Vertical Leachate Migration and Aquifer Protective Capacity of Cassidy Dumpsite, Ojo, Lagos State, Nigeria

Abiola Ogungbe, Nathaniwl Unanka, Rafiu Adegbola, Eugene Onori, Cornelius Ogabi; Nigeria
Research Area: Environmental and Ecological Engineering

Geophysical Investigation of Road Failure Along Lagos – Badagry Expressway Using Electrical Resistivity Imaging

Abiola Ogungbe, Timothy Afolabi, Eugene Onori, Cornelius Ogabi; Nigeria
Research Area: Environmental and Ecological Engineering

Geothermal Reources of Pakistan: A Country Update Report

Malik Sikander Bakht; Pakistan
Research Area: Geological and Environmental Engineering

Hydrolysis Study in Rainwater of a ‎Biocomposite Material Based on Sunflower ‎Oil and Alfa Fibers as Natural Resources ‎

Sihem Kadem; Algeria
Research Area: Environmental and Ecological Engineering

Chair: Javad Karimi

Electronic Structure Calculation of AsSiTeB/SiAsBTe Nanostructures Using Density Functional Theory

Ankit Kargeti, Ravikant Shrivastav, Tabish Rasheed; India
Research Area: Physical and Mathematical Sciences

Begnin Syntheis of New Fused Pyrimidines Derivatives under Microwave in Water as Solvent

Mohamed Dehamchia, Ichrak Bouguessa, M. Ridha Ouahrani, Abdelkrim Gouasmia, Zine Regainia; Algeria
Research Area: Chemical and Materials Engineering

Hot Cracking Susceptibility Evaluation of the Advanced UNS S31035 Austenitic Stainless Steel by Varestraint Weldability Testing

Mikael M. Johansson, Peter Stenvall, Leif Karlsson, Joel Andersson; Sweden
Research Area: Materials and Metallurgical Engineering

Microstructures and Mechanical Property of ti6al4v - a Comparison between Selective Laser Melting, Electron Beam Melting and Spark Plasma Sintering

Javad Karimi, Prashanth Konda Gokuldoss; Estonia
Research Area: Materials and Metallurgical Engineering

Chair: Bogdan Cramariuc

Saudi Human Awareness Needs: A Survey in How Human Causes Errors and Mistakes Leads to Leak Confidential Data with Proposed Solutions in Saudi Arabia

Amal Hussain Alkhaiwani, Ghadah Abdullah Almalki; Saudi Arabia
Research Area: Computer and Information Engineering

Survey of Access Controls in Cloud Computing

Monirah Alkathiry, Hanan Aljarwan; Saudi Arabia
Research Area: Computer and Information Engineering

Exploring Utility and Intrinsic Value among UAE Arabic Teachers in Integrating M-Learning

Dina Tareq Ismail, Alexandria A. Proff; United Arab Emirates
Research Area: Educational and Pedagogical Sciences

Artificial Intelligence Based Animal Collision Module for Autonomous Cars

Joshua S. Jaistein; India
Research Area: Computer and Information Engineering

The Influence of the Applied Power in an Inkjet Plasma Generator on the Inactivation of Bacteria on Paper Support

Oana Cramariuc, Cristina Mircea, Daniela C. Nastac, Bogdan Cramariuc, Alin Adrian Mihaila, Alexandru Chivu, Radu Cramariuc; Romania
Research Area: Electrical and Computer Engineering

Chair: Atiq Uz Zaman

Study of Open Spaces in Urban Residential Clusters in India

Renuka G. Oka; India
Research Area: Architectural and Environmental Engineering

Development of Green Roads and Highways Using Carbon Neutral Materials: A Review

Yusuf Babangida Attahiru, Md. Maniruzzaman A. Aziz; Nigeria
Research Area: Materials and Metallurgical Engineering

Power Generating Embedment beneath Vehicle Traffic Asphalt Roads

Ahmed Khalil; Egypt
Research Area: Environmental and Ecological Engineering

Improving Waste Recycling and Resource Productivity by Integrating Smart Resource Tracking System

Atiq Zaman; Australia
Research Area: Urban and Civil Engineering

Analysis of Energy Consumption Based on Household Appliances in Jodhpur, India

A. Kumar, V. Devadas; India
Research Area: Urban and Civil Engineering

Solar Energy Generation Based Urban Development: A Case of Jodhpur City

A. Kumar, V. Devadas ; India
Research Area: Urban and Civil Engineering

Evaluation of Urban Plannig Process and Challenges Faced Due to Change of Use in the Colombo

H. S. Karunasinghe, G. P. T. S. Hemakumara; Sri Lanka
Research Area: Civil and Architectural Engineering

Chair: Habtamu Garoma Debela

Fitted Non-polynomial Spline Method for Singularly Perturbed Delay Differential Equations with Integral Boundary Condition

Habtamu Garoma Debela, Gemechis File Duressa; Ethiopia
Research Area: Mathematical and Computational Sciences

Formulation of a Rational Option Pricing Model Using Artificial Neural Networks

Kaustubh Yadav; India
Research Area: Mathematical and Computational Sciences

Step Method for Solving Nonlinear Two Delays Differential Equation in Parkinson’s Disease

H. N. Agiza, M. A. Sohaly, M. A. Elfouly; Egypt
Research Area: Mathematical and Computational Sciences

Modeling the Effect of Scale Deposition on Heat Transfer in Desalination Multi-Effect Distillation Evaporators

K. Bourouni, M. Chacha, T. Jaber, A. Tchantchane; Tunisia
Research Area: Mechanical and Industrial Engineering

Parallel Finite Element Approach for Large Thermal Problems Applied to Glass Bending Furnace

Marc Baydoun; France
Research Area: Mechanical and Industrial Engineering

Electronics Thermal Management Driven Design of an IP65-Rated Motor Inverter

Sachin Kamble, Raghothama Anekal, Shivakumar Bhavi; India
Research Area: Aerospace and Mechanical Engineering

The Dynamics of Compositional Plumes in the Presence of Rotation

Khaled S. M. Al-Mashrafi; Oman
Research Area: Energy and Power Engineering

Chair: Stephanie Khater

Isosorbide Bis-Methyl Carbonate: Opportunities for an Industrial Model Based on Biomass

Olga Gomez De Miranda, Jose R. Ochoa-Gomez, Stefaan De Wildeman, Luciano Monsegue, Soraya Prieto, Leire Lorenzo, Cristina Dineiro; Other
Research Area: Chemical and Molecular Engineering

Analysis of Intra-Varietal Diversity for Some Lebanese Grapevine Cultivars

Stephanie Khater, Ali Chehade, Lamis Chalak; Lebanon
Research Area: Bioengineering and Life Sciences

Trends in Accumulation of Cichoric Acid in Cell Suspension Culture of Lactuca Undulata by Silver Nanoparticle Elicitation

Rezvan Ramezannezhad, Mahnaz Aghdasi, Mohammad Fatemi; Iran
Research Area: Biotechnology and Bioengineering

Chair: Anđelka Stojanović

The School-to-Work Transition: The Case of NEET Youths from Rural Areas

Anđelka Stojanović, Ivan Mihajlović, Ivica Nikolić; Serbia
Research Area: Economics and Management Engineering

A 'Systematic Literature Review' of Specific Types of Inventory Faced by the Management of Firms

Rui Brito; Portugal
Research Area: Industrial and Manufacturing Engineering

Effect of Social Media on Knowledge Work

Pekka Makkonen, Georgios Lampropoulos, Kerstin Siakas; Finland
Research Area: Social and Business Sciences

Chair: Zahira Belkacemi

The Use of Geographical Information Systems to Identify Suitable Areas for Wind Farm in Boeotia (Greece)

Zahira Belkacemi; Algeria
Research Area: Environmental and Ecological Engineering

Chair: Patrik Scajev

Laser Irradiated GeSn Photodetector for Improved Infrared Photodetection

Patrik Scajev, Pavels Onufrijevs, Algirdas Mekys, Tadas Malinauskas, Dominykas Augulis, Liudvikas Subacius, Kuo-Chih Lee, Jevgenijs Kaupuzs, Arturs Medvids, Hung Hsiang Cheng ; Lithuania
Research Area: Physical and Mathematical Sciences

Recombination and Diffusion Processes in GeSn Epilayer

Patrik Scajev, Liudvikas Subacius, Vaiva Soriute, Pavels Onufrijevs, Hung-Hsiang Cheng; Lithuania
Research Area: Physical and Mathematical Sciences

Mechanical and Morphological Properties of 3D Printed Continuous Fiber Reinforced Thermoplastic Composite Materials

Murat Yazici, Tolgahan Bayram; Türkiye
Research Area: Materials and Metallurgical Engineering

The Effect of Surface Roughness on Transition Point of Boundary Layer around a Rotating Sphere Using Smoke Visualization

Morteza Ghasemi, Kamyar Mansor; Iran
Research Area: Aerospace and Mechanical Engineering

Chair: Jamal Laaouine

Maximum Distance Separable b-Symbol Repeated-Root γ-Constacylic Codes over a Finite Chain Ring of Length 2

Jamal Laaouine, Mohammed Elhassani Charkani; Morocco
Research Area: Computer and Information Engineering

Developing an Advanced Algorithm Capable of Classifying News, Articles and Other Textual Documents Using Text Mining Techniques

R. B. Knudsen, O. T. Rasmussen, R. A. Alphinas; Denmark
Research Area: Computer and Information Engineering

Predicting the Product Life Cycle of Songs on Radio - How Record Labels Can Manage Product Portfolio and Prioritise Artists by Using Machine Learning Techniques

Claus N. Holm, Oliver F. Grooss, Robert A. Alphinas; Denmark
Research Area: Computer and Information Engineering

Chair: Kinga Filipowiak

Extraction of Pt(IV) and Pd(II) with Quaternary Pyridinium Salts as Novel Extractants

Zuzanna Wiecka, Martyna Rzelewska-Piekut, Kinga Filipowiak, Magdalena Regel-Rosocka, Karolina Wieszczycka; Poland
Research Area: Chemical and Materials Engineering

Polymer Sorbents Modified Ionic Liquid for Cr(VI) Removal

Kinga Filipowiak, Karolina Wieszczycka, Irmina Wojciechowska, Grzegorz Wojcik ; Poland
Research Area: Chemical and Materials Engineering

Polymer Microcapsules Containing Task-Specific Ionic Liquids for Heavy Metals Recovery from Dilute Aqueous Solution

Kinga Filipowiak, Karolina Wieszczycka, Irmina Wojciechowska; Poland
Research Area: Chemical and Materials Engineering

Novel Polymer Sorbents Modified with Pyridine Derivatives for Heavy Metals Ions Removal

Kinga Filipowiak, Karolina Wieszczycka, Irmina Wojciechowska; Poland
Research Area: Chemical and Materials Engineering

An Atom-Economical and Expeditious Synthesis of 2-Selenopyridines via Ruthenium(II) Catalyzed [2+2+2] Cycloaddition Reaction of α,ω-Diynes with Selenocyanates

P. Kalaramna, A. Goswami; India
Research Area: Chemical and Molecular Engineering

Chair: Marta Acin Albiac

Adaptative Metabolism of Lactic Acid Bacteria during Brewers' Spent Grain Fermentation

M. Acin-Albiac, P. Filannino, R. Coda, Carlo G. Rizzello, M. Gobbetti, R. Di Cagno; Italy
Research Area: Nutrition and Food Engineering

Effects of Temperature and the Use of Bacteriocins on Cross-Contamination from Animal Source Food Processing: A Mathematical Model

Benjamin Castillo, Luis Pastenes, Fernando Cerdova; Chile
Research Area: Nutrition and Food Engineering

New Applications of Essential Oils: Edible Packaging Material for Food Supplements

Roxana Gheorghita, Gheorghe Gutt; Romania
Research Area: Nutrition and Food Engineering

Chair: Kushaal Selvarajah

Comparative Study on the Social Behaviour of Sambar Deer (Rusa unicolor) in Captive Facilities in Peninsular Malaysia

Kushaal Selvarajah, Geetha Annavi, Mohd Noor Hisham Mohd Nadzir; Malaysia
Research Area: Environmental and Ecological Engineering

On Timber Harvesting Practices in the USA

Salim Hiziroglu; United States
Research Area: Agricultural and Biosystems Engineering

Study of the Critical Parameters Affecting Vapor Intrusion Pathways, including Lateral Source/Building Separation

Juan Sebastian Rios Mora; France
Research Area: Environmental and Ecological Engineering

A Review on the Mechanism Removal of Pesticides and Heavy Metal from Agricultural Runoff in Treatment Train

N. A. Ahmad Zubairi, H. Takaijudin, K. W. Yusof; Malaysia
Research Area: Environmental and Ecological Engineering

Sustainable Development Goals 2030: A Case of Malaysian Priorities from the Perspectives of Undergraduate Students

Zurina Mahadi, Hukil Sino; Malaysia
Research Area: Environmental and Ecological Engineering

Exceptional Cost and Time Optimization with Successful Leak Repair and Restoration of Oil Production: West Kuwait Case Study

Nasser Al-Azmi, Al-Sabea Salem, Abu-Eida Abdullah, Milan Patra, Mohamed Elyas, Daniel Freile, Larisa Tagarieva; Kuwait
Research Area: Energy and Power Engineering

Produced Water Discharge: A Portable Ultraviolet Device to Measure Oil in Water Content of between 30-500ppm for High API Gas Condensates

Erwin Chan, Melissa Kho, Dymphna Ekol; Malaysia
Research Area: Energy and Power Engineering

Mathematical Study of CO₂ Dispersion in Carbonated Water Injection Enhanced Oil Recovery Using Non-Equilibrium 2D Simulator

Ahmed Abdulrahman, Jalal Foroozesh; Malaysia
Research Area: Energy and Power Engineering

Reservoir Potential, Net Pay Zone and 3D Modeling of Cretaceous Clastic Reservoir in Eastern Sulieman Belt Pakistan

Hadayat Ullah, Pervez Khalid, Saad Ahmed Mashwani, Zaheer Abbasi, Mubashir Mehmood, Muhammad Jahangir, Ehsan ul Haq; Pakistan
Research Area: Geological and Environmental Engineering

Chair: Abdullahi Abubakar

Use of Social Media in Data Collection

Abdullahi Abubakar Ambursa; Nigeria
Research Area: Humanities and Social Sciences

A Study of the Philosophical and Mystical Backgrounds of the Sheikh Safieddin Ardebili Monument

Ali Babaei; Iran
Research Area: Humanities and Social Sciences

Using Smartphone Instant Messaging (IM) App for Academic Discussion in an Undergraduate Chemistry Course

Mei Xuan Tan, Eng Ying Bong; Singapore
Research Area: Educational and Pedagogical Sciences

Student Achievement Monitoring: An Instrument for Measuring and Development Math Competence

Natalia Lebedeva; Russia
Research Area: Educational and Pedagogical Sciences

Teaching Model of Industry Specific Topics for Engineers

Anna L. Hovhannisyan; Armenia
Research Area: Educational and Pedagogical Sciences

Implementing Effective Strategies to Improve Teaching and Learning in Higher Education: Balancing the Engagement Acts between Lecturers And Students

Jeffrey Siphiwe Mkhize; South Africa
Research Area: Educational and Pedagogical Sciences

Lexicogramatical Realization on Undergraduate Students’ English Theses Writing Texts: A Systemic Functional Linguistic Approach

Magdalena Ngongo; Indonesia
Research Area: Cognitive and Language Sciences

Is Maternity Discrimination Pushing Women out of Work? A Case Study of Maternity Experiences of Working Women in Malaysia

Nor Hafizah Selamat, Intan Hashima Mohd Hashim, Noraida Endut, Shariffah Suraya Syed Jamaludin, Sharifah Zahhura Syed Abdullah, Suziana Mat Yasin, Nurul Jannah Ambak ; Malaysia
Research Area: Humanities and Social Sciences

EU Citizenship, Brexit, and Democracy

Noemi Bessa Vilela; Portugal
Research Area: Law and Political Sciences

Conjoint Analysis of Underpinning Conditions Islamophobia: A Multi-Level and Multi-Variate Analysis of Pakistan

Sehrish Qayyum; Pakistan
Research Area: Humanities and Social Sciences

Chair: Siti Aiysyah Binti Tumin

Uneven Development: Structural Changes and Income Outcomes across States in Malaysia

Siti Aiysyah Tumin; Malaysia
Research Area: Economics and Management Engineering

Public Debt Sustainability: Estimating the Fiscal Reaction Function for Uganda (1981/82 – 2016/17)

Enock Will Nsubuga Bulime, Ibrahim Mukisa, Edward Bbaale; Uganda
Research Area: Economics and Management Engineering

Using the SCOR Model to Measure Supply Chain Performance: A Literature Study

Thi Thuy Hanh Nguyen, Mourad Abed, Abdelghani Bekrar, Thi Muoi Le; France
Research Area: Industrial and Systems Engineering

Global Value Chains: Measuring Revealed Comparative Advantages with Trade in Value Added, (Mis)Interpretation

Hristina Gaydarska; Japan
Research Area: Industrial and Systems Engineering

Important Tactics to Enhance Expatriate Retention, the Influence of Perceived Risk and Expatriate Engagement: A Conceptualized Research Framework

Ankita Sahoo, Jayaraman Krishnaswamy; Malaysia
Research Area: Economics and Management Engineering

The Impact of Perceived Risk and Sensitivity to Pandemic on Expatriate Engagement: Empirical Study on Expatriates during COVID-19

Ankita Sahoo, Jayaraman Krishnaswamy, Nelvin Leow; Malaysia
Research Area: Economics and Management Engineering

The Influence of Activity Selection and Travel Distance on Forest Recreation Policies

Mark Morgan, Christine Li, Shuangyu Xu, Jenny McCarty; United States
Research Area: Sport and Health Sciences

Chair: Azwadi Mohamad

The Effect of Mgo and Rubber Nanofillers on Electrical Treeing Characteristic of XLPE Based Nanocomposites

Nur Amira nor Arifin, Tashia Marie Anthony, Mohd Ruzlin Mokhtar, Huzainie Shafi Abd Halim; Malaysia
Research Area: Electrical and Computer Engineering

Severity Index Level in Effectively Managing Medium Voltage Underground Power Cable

Mohd Azraei Pangah Pa'at, Mohd Ruzlin Mohd Mokhtar, Norhidayu Rameli, Tashia Marie Anthony, Huzainie Shafi Abd Halim; Malaysia
Research Area: Electrical and Computer Engineering

Technology of Gyro Orientation Measurement Unit (Gyro Omu) for Underground Utility Mapping Practice

Mohd Ruzlin Mohd Mokhtar; Malaysia
Research Area: Electrical and Computer Engineering

Revised Tower Earthing Design in High-Voltage Transmission Network for High-Frequency Lightning Condition

Azwadi Mohamad, Pauzi Yahaya, Nadiah Hudi; Malaysia
Research Area: Electrical and Computer Engineering

The Fluid Limit of the Critical Processor Sharing Tandem Queue

Amal Ezzidani, Abdelghani Ben Tahar, Mohamed Hanini; Morocco
Research Area: Mathematical and Computational Sciences

Design and Characterization of a CMOS Process Sensor Utilizing Vth Extractor Circuit

Rohana Musa, Yuzman Yusoff, Chia Chieu Yin, Hanif Che Lah; Malaysia
Research Area: Electronics and Communication Engineering

Chair: Aicha Koulou

A Methodology for Sustainable Interoperability within Collaborative Networks

Aicha Koulou, Norelislam El Hami, Nabil Hmina; Morocco
Research Area: Computer and Information Engineering

AR/VR Methodology in Retail Advertising: An Educator’s Perspective in Disruptive Technology Era and IR 4.0

S.R. Abdul Razak, N.A. Abdul Wahab, S. Che Din, F. Abu Sujak; Malaysia
Research Area: Electronics and Communication Engineering

Benefits of Hybrid Mix in Renewable Energy and Integration with E-Efficient Compositions

Ahmed Khalil; Egypt
Research Area: Electrical and Computer Engineering

Chair: Chiau Yuan Lim

The Evaluation of Fuel Desulfurization Performance of Choline-Chloride Based Deep Eutectic Solvents with Addition of Graphene Oxide as Catalyst

Chiau Yuan Lim, Hayyiratul Fatimah Mohd Zaid, Fai Kait Chong; Malaysia
Research Area: Environmental and Ecological Engineering

Defining the Turbulent Coefficients with the Effect of Atmospheric Stability in Wake of a Wind Turbine Wake

Mohammad A. Sazzad, Md M. Alam; United States
Research Area: Energy and Power Engineering

Identification of Potential Large Scale Floating Solar Sites in Peninsular Malaysia

Nur Iffika Ruslan, Ahmad Rosly Abbas, Munirah Stapah@Salleh, Nurfaziera Rahim; Malaysia
Research Area: Energy and Power Engineering

Impact of Large Scale Solar Power Plant on Airports and Aviation

Munirah Stapah Salleh, Ahmad Rosly Abbas, Sazalina Zakaria, Nur Iffika Ruslan, Nurfaziera Rahim; Malaysia
Research Area: Energy and Power Engineering

Chair: Bienvenu Fouda Mbanga

Synthesis and Characterization of CNPs Coated Carbon Nanorods for Cd2+ Ion Adsorption from Industrial Waste Water and Reusable for Latent Fingerprint Detection

Bienvenu Gael Fouda Mbanga; South Africa
Research Area: Chemical and Materials Engineering

Chair: Elena Carcano

Non-Wood Fiber Resources as Raw Material for Composite Panels Manufacture

Salim Hiziroglu; United States
Research Area: Materials and Metallurgical Engineering

Flow Duration Curves and Recession Curves Connection through a Mathematical Link

Elena Carcano, Mirzi Betasolo; Italy
Research Area: Civil and Environmental Engineering

Chair: Carlos Sena Caires

Design for Classroom Units: A Collaborative Multicultural Studio Development with Chinese Students

C. S. Caires, A. Barbosa, W. Hanyou; China
Research Area: Industrial and Systems Engineering

Big Data Classification for the Analysis MEL Scale Features Using Knn Parameterization

Ruslan Skuratovskii; Ukraine
Research Area: Mathematical and Computational Sciences

Hybrid Equity Warrants Pricing Formulation under Stochastic Dynamics

Teh Raihana Nazirah Roslan, Siti Zulaiha Ibrahim, Sharmila Karim; Malaysia
Research Area: Mathematical and Computational Sciences

Arbutin-loaded Butylglyceryl Dextran Nanoparticles for Topical Delivery

Mohammad F. Bostanudin, Tan S. Fei, Azwan M. Lazim; United Arab Emirates
Research Area: Materials and Metallurgical Engineering

Chair: Nursyafiqah Abdul Kahar

Sustainability of High-Rise Affordable Housing: Critical Issues in Applying Green Building Rating Tools

Poh Im. Lim, Hillary Yee Qin. Tan; Malaysia
Research Area: Architectural and Environmental Engineering

Preliminary Geotechnical Properties of Uncemented Sandstone Kati Formation

Nursyafiqah Abdul Kahar, Niraku Rosmawati Ahmad, Hisham Mohamad, Siti Nuruljannah Mohd Marzuki; Malaysia
Research Area: Civil and Environmental Engineering

Application of Istisna' in the Malaysian Construction Industry

Amirul Alif, Fiqrie Ellis; Malaysia
Research Area: Structural and Construction Engineering

Preliminary Investigation of Hospital Buildings Maintenance Management in Malaysia

Christtestimony Oluwafemi Jesumoroti, AbdulLateef Ashola Olanrewaju, Khor Soo Cheen; Malaysia
Research Area: Industrial and Systems Engineering

Plc and Lora Based Leds Smart Street Light Monitoring System

Mr. Mawouena Fongbedji Mawouena, Pr. Nissrine Krami Nissrine, Pr. Mohsine Bouya Mohsine; Morocco
Research Area: Electrical and Information Engineering

Chair: Benjamin Castillo

Cross-Contact Mathematical Modelling and Its Effects on Consumers: Potential Danger in Food Labeling for People with Allergies and Intolerances

Benjamin Castillo, Luis Pastenes; Chile
Research Area: Nutrition and Food Engineering

PROGRAM LAST UPDATED: March, 05 2021 09:21

PROGRAM GUIDELINES

1.GUIDE FOR ORAL AND e-POSTER PRESENTATIONS

We kindly ask ORAL presenters to prepare electronic presentations of 15 minutes (allowing 5 minutes for discussions) and e-POSTER presenters to prepare short electronic presentations of 5 minutes (allowing 5 minutes for discussions) (NO PRINT OUTS). A Linux-based operating system is used for both Oral and e-Poster presentations. All presenters should make a PDF file version of their presentation and upload it to the system.

2. PRESENTATION SET UP

Laptop Computer, Projector, USB Flash Drive (No CD Drive), MS. PowerPoint/AcrobatReader

3. SYSTEM SECURITY ALERT

As many delegates insert their USB devices into the laptop computer provided for the presentations, we cannot avoid Cyber/Computer viruses. You are kindly advised to bring a USB Flash Drive containing ONLY your .ppt, .ptx or .pdf presentation file or risk other files being corrupted or made permanently inaccessible.

4. ROLE OF THE SESSION CHAIR

The duties of the Session Chair include the following:

1. Arrive at the conference hall at least 10 minutes before the session begins. Identify the paper presenters and discussant(s) in advance, and introduce yourself. Remind each presenter of the time limits that apply, and describe the method you will use to alert them of time limits during the actual presentation.
2. At the start of the session, introduce yourself to the audience, announce the session/title, and offer a brief overview indicating how the papers are related.
3. Prior to each presentation, introduce the speaker, announce the paper’s title, the name(s) of the author(s), and provide brief comments regarding the affiliation and/or background of each presenter. Identify the individual who will be speaking if it is someone other than the first author.
4. During the presentations enforce time limits strictly so that no author (or audience member) monopolizes someone else’s time. Oral paper presentations each have 20 minutes (15 minutes for full presentation papers, 5 minutes for discussions), and 10 minutes for e-Poster (electronic poster) presentations (5 minutes for poster presentation, 5 minutes for discussions).
5. Once presentations are complete (oral paper presentations and e-Poster presentations), the remaining time can be used for informal discussion between the audience and session participants. It is your job to field questions from the audience.
6. Try to conduct the session as informally as possible (e.g., use first names when addressing participants and members of the audience) to encourage as much audience participation as possible.

5. BEST PAPER AWARDS / BEST PRESENTATION AWARDS

A 'Best Paper Award / Best Presentation Award' will be conferred on the author(s) of an abstract or a full paper presented at the conference. Selection is made based on the best combined marks of the abstract / paper review and presentation quality appraisal conducted by the Session Chair at the conference venue, and assessed by the Program Committee. Award winners will be announced after the conference. The author(s) of a selected paper/presentation will receive a signed and stamped official Best Paper Award / Best Presentation Award e-certificate.