Rome, February 17-18, 2025 Conference Program

Scholarly Integrity Remarks:

1)Authors must be ready in the meeting room at least 10 minutes prior to the start of the session. Presenters must introduce themselves to the session chair(s) and upload their Oral and ePoster presentations to the computer.

2)Authors must be able to present on any day of the conference – the program cannot be tailored around specific requests from individual authors to present on particular days.

3)The international research conference program is designed for original research contributions and presentations in all research fields. Presentations scheduled in the Oral and ePoster sessions are drawn from a selection of the peer reviewed papers from a wide range of scientific and other disciplines of inquiry.

FEBRUARY 17-18, 2025: DIGITAL PROGRAM

DAY 1: VIRTUAL MEETING
The digital presentation session will start at 11 a.m. (midday) on February 17, 2025 London local time. The link to join the virtual conference will be available for registered delegates 10 minutes before the session at https://waset.org/profile/messages.

DAY 2: PERTINENT READING
Digital program consists of an e-book of relevant studies to download for future reading on February 18, 2025.

Digital Program consists of the e-proceedings book which is available online-only and includes the conference communications (proceedings abstracts and papers). Registered participants can access the digitally available conference proceedings ( and certificates ) by visiting their profile pages.

MEDICAL AND HEALTH SCIENCES RESEARCH

System Dietadhoc® - A Fusion of Human-Centred Design and Agile Development for the Explainability of AI Techniques Based on Nutritional and Clinical Data

Michelangelo Sofo, Giuseppe Labianca; Italy
Research Area: Biomedical and Biological Engineering

Bioelectronic Devices for Seamless Neural Interface in Prosthetic Limb Control

Cheng Zhi, Jin Yan; Taiwan
Research Area: Biomedical and Biological Engineering

Developing a Clinical Decision Support System for Personalized Treatment Recommendations

Jesper Storm; Croatia
Research Area: Biomedical and Biological Engineering

Real-Time Data Extraction and Analysis for Patient Monitoring in Intensive Care Units

Sherice Cole, Tanya Blake; Jamaica
Research Area: Biomedical and Biological Engineering

Photonic Biosensors in Non-Invasive Glucose Monitoring and Diabetic Management

Koji Nakajima; Singapore
Research Area: Biomedical and Biological Engineering

A Hybrid Approach for Automated Medical Image Analysis and Diagnosis

Riccardo Bianco; Croatia
Research Area: Biomedical and Biological Engineering

Integrating Fetal Membranes and collagen Layers Seeded with Fibroblasts and Keratinocytes for Diabetic Wound Ulcers

Atefeh Shahbazi, Zahra Shahravi, Melika Mirghafari; Iran
Research Area: Biomedical and Biological Engineering

Il pensiero di Giorgio Agamben sulla possibilità di legittimare la vita e la morte nell'istruzione pubblica

Geraldo Márcio Da Silva; Brazil
Research Area: Bioengineering and Life Sciences

The Role of Strength Training in Preventing Sarcopenia in Older Adults

Sofie Amundsen; Norway
Research Area: Sport and Health Sciences

Interplay of Physical Activity, Hypoglycemia, and Psychological Factors: A Longitudinal Analysis in Diabetic Youth

Georges Jabbour; Qatar
Research Area: Sport and Health Sciences

Evaluating the Efficiency of Cryotherapy Devices in Post-Exercise Recovery

Ayumi Kimura, Nancy Wood; United States
Research Area: Sport and Health Sciences

The Effects of High-Intensity Interval Training on Cardiovascular Health

Heba Al-Mutawa; Saudi Arabia
Research Area: Sport and Health Sciences

Electromyography-Based Feedback Systems in Improving Strength Training Regimens

Federica Greco; Sweden
Research Area: Sport and Health Sciences

The Role of Mobile Genetic Elements in the Dissemination of Antimicrobial Resistance Genes

Eva Jandova, Aria Zeman; Japan
Research Area: Bioengineering and Life Sciences

One Health Approach to Combatting Antimicrobial Resistance in Veterinary and Human Medicine

Muna Al-Muhanna, Wafa Al-Sudairy; Hungary
Research Area: Bioengineering and Life Sciences

Emergence of Carbapenemase Escherichia Coli Isolates from the Little Egret (Egretta Garzetta) in Algeria

Bouaziz Amira, Zaatout Nawel; Algeria
Research Area: Bioengineering and Life Sciences

Nanoparticle-Based Strategies for Combating Antibiotic-Resistant Bacteria in Veterinary Medicine

Burcu Tan, Deniz Şahin, Alev Özdemir; Türkiye
Research Area: Bioengineering and Life Sciences

Advanced Molecular Diagnostics for Early Detection of Antimicrobial Resistance in Veterinary Practices

Haruki Nishimura; Singapore
Research Area: Bioengineering and Life Sciences

A Left Testicular Cancer with Multiple Metastases Nursing Experience

Syue-Wen Lin; Taiwan
Research Area: Nursing and Health Sciences

A Lung Cancer Patients with Septic Shock Nursing Experience

Syue-Wen Lin; Taiwan
Research Area: Nursing and Health Sciences

A Lung Cancer Patient Grief Counseling Nursing Experience

Syue-Wen Lin; Taiwan
Research Area: Nursing and Health Sciences

Nursing Experience in the Intensive Care of a Lung Cancer Patient with Pulmonary Embolism on Extracorporeal Membrane Oxygenation

Huang Wei-Yi; Taiwan
Research Area: Nursing and Health Sciences

The Efficacy of Bioprinted Scaffolds in Lung Cancer Metastases Treatment

Halina Zajac, Karol Brzezinski, Wieslawa Lis; Poland
Research Area: Nursing and Health Sciences

High-Precision Drug Delivery Systems in Managing Cancer-Related Embolism

Signe Juul; Denmark
Research Area: Nursing and Health Sciences

Nursing Experiences with Robotic-Assisted Procedures in Intensive Care Oncology Units

Liang Zhenyu, Chen Minghao; China
Research Area: Nursing and Health Sciences

Innovative Therapies for Shock Management in Late-Stage Cancer Patients

Shanice Brown; Hong Kong
Research Area: Nursing and Health Sciences

The Effectiveness of Nanocarriers in Targeting Cancer Metastases

Karlo Bozic, Marija Kralj, Leon Lukic; Croatia
Research Area: Biomedical and Biological Engineering

Biodegradable Stents for Preventing Recurrent Embolism in Cancer Patients

Fionnuala Donovan, Shane Kelly; Austria
Research Area: Biomedical and Biological Engineering

Biophotonics for Non-Invasive Monitoring of Cancer Progression

Elijah Day; Australia
Research Area: Biomedical and Biological Engineering

Use of Hyperbaric Oxygen Therapy in Treating Cancer-Related Complications

Constantin Moraru, Svetlana Ciobanu, Ilie Stratulat, Rodica Berlinschi; Moldova
Research Area: Biomedical and Biological Engineering

Intensive Care Nursing Experience of a Lung Cancer Patient Receiving Palliative

Huang Wei-Yi; Taiwan
Research Area: Nursing and Health Sciences

Improving the Accuracy of Oral Care Performed by ICU Nurses for Cancer Patients

Huang Wei-Yi; Taiwan
Research Area: Nursing and Health Sciences

Experience in Caring for a Patient with Terminal Aortic Dissection of Lung Cancer and Paralysis of the Lower Limbs after Surgery

Pei-Shan Liang; Taiwan
Research Area: Nursing and Health Sciences

Nursing Experience in Caring for a Patient with Terminal Gastric Cancer and Abdominal Aortic Aneurysm

Pei-Shan Liang; Taiwan
Research Area: Nursing and Health Sciences

Clinical Nursing Experience in Managing a Uterine Cancer Patient with Psychogenic Shock During the Extracorporeal Membrane Oxygenation Weaning Process

Syue-Wen Lin; Taiwan
Research Area: Nursing and Health Sciences

Intensive Care Experience of Providing Palliative Care for a Terminal Lung Cancer Patient

Ting-I Lin; Taiwan
Research Area: Nursing and Health Sciences

Care Experience of a Female Breast Cancer Patient Undergoing Modified Radical Mastectomy

Ting-I Lin; Taiwan
Research Area: Nursing and Health Sciences

The Use of Biodegradable Polymers in Palliative Care Drug Delivery

Giorgia Palumbo; Italy
Research Area: Nursing and Health Sciences

Development of Smart Infusion Pumps for Chemotherapy Administration

Turki Al-Mutlaq, William Morton; United States
Research Area: Nursing and Health Sciences

Nursing Experiences in Managing Pulmonary Embolism in Cancer Patients

Isaac Doyle, Naomi Fox; Canada
Research Area: Nursing and Health Sciences

The Role of Nurses in Identifying and Managing Cancer Treatment-Related Complications

Hamza Al-Obaidi, Khalid Al-Rawi; United Arab Emirates
Research Area: Nursing and Health Sciences

Influence of Soil Acidification on Photosynthetic Efficiency and Biomass Production in Crop Plants

Niki Diamantopoulos, Christos Kotsios, Zoe Voulgaris; Greece
Research Area: Bioengineering and Life Sciences

Influence of Salicylic Acid on Submergence Stress Recovery in Selected Rice Cultivars (Oryza sativa L.)

Ja’afar U., A. M. Gumi, Salisu N., Obadiah C. D.; Nigeria
Research Area: Bioengineering and Life Sciences

Plant Stress Responses Under Varying pH Conditions in Hydroponic Systems: Advances in Genetic Manipulation

Nedas Petraitis, Rokas Jonaitis; Lithuania
Research Area: Bioengineering and Life Sciences

Mechanisms of Cellular Detoxification in Plants Exposed to High Soil Acidity

Eimear Foley, Padraig Fitzgerald; Taiwan
Research Area: Bioengineering and Life Sciences

Bioprospecting for Novel Enzymes from Extremophilic Organisms

Vikas Patil, Nandita Bhave; Malaysia
Research Area: Biotechnology and Bioengineering

Harnessing Microorganism Having Potential for Biotreatment of Wastewater

Haruna Saidu, Sulaiman Mohammed, Abdulkarim Ali Deba, Shaza Eva Mohamad; Nigeria
Research Area: Biotechnology and Bioengineering

Engineering Microbial Consortia for Efficient Wastewater Treatment

David Valdez, Clara Tolentino, Nicolas Santiago, Stella Domingo; Philippines
Research Area: Biotechnology and Bioengineering

Flow Visualization and Mixing Enhancement in Y-Junction Microchannel with 3D Acoustic Streaming Flow Patterns Induced by Trapezoidal Triangular Structure using High-Viscous Liquids

Ayalew Yimam Ali; Taiwan
Research Area: Biomedical and Biological Engineering

Visualization of Flow Patterns in Microfluidic Channels Using Micro-Particle Image Velocimetry

Petra Vrbova, Radim Benes, Dana Kopecka; Czechia
Research Area: Biomedical and Biological Engineering

Microfabrication of 3D Microfluidic Devices for Tissue Engineering

Natalie Gray; Iceland
Research Area: Biomedical and Biological Engineering

Microfluidic Platforms for Single-Cell Analysis and Sorting

Noemi Damiani, Simone Santoro; Italy
Research Area: Biomedical and Biological Engineering

Acoustic Manipulation of Microparticles in Microfluidic Devices

Joaquin Morales; Sweden
Research Area: Biomedical and Biological Engineering

Electrophysiological Advances in Atrial Fibrillation: Mapping and Ablation Techniques

Silvia Longo, Christoph Widmer; Switzerland
Research Area: Health and Medical Engineering

3D Bioprinting Applications for Regenerative Cardiology in Myocardial Infarction Repair

Serena Pugliese; United States
Research Area: Health and Medical Engineering

High-Resolution Imaging Systems for Coronary Artery Disease Diagnosis and Prognosis

Gao Linfeng; Hong Kong
Research Area: Health and Medical Engineering

Complex Management of Arrhythmogenic Right Ventricular Dysplasia/Cardiomyopathy

Abdullah A. Al Qurashi, Hattan A. Hassani, Bader K. Alaslap; Saudi Arabia
Research Area: Health and Medical Engineering

Hybrid Surgical Techniques for Valve Replacement in High-Risk Patients

Apisit Patcharapol, Jarunee Jitrapan; Thailand
Research Area: Health and Medical Engineering

Next-Generation Antithrombotic Therapies for Enhanced Cardiovascular Safety

Lucia Sanchez, Maddie Ellis; Canada
Research Area: Health and Medical Engineering

Body Image, Anxiety, Depression and DNA Damage in Obese Egyptian Women

Ramy Mohamed, Moushira E. Zaki, Hala T. El-Bassyouni, Walaa Yousef, Safinaz El Toukhy, Samira Ismail; Egypt
Research Area: Medical and Health Sciences

Hanging Fatalities Involving Drugs in Jazan, Saudi Arabia

Mohammed Albeishy, Mohammed A. Hakami, Farid M. Abualsail, Magbool Oraiby, Mohammed Alattas, Ali Muyidi, Ibraheem Attafi; Saudi Arabia
Research Area: Medical and Health Sciences

Nutrigenomics and Its Role in Personalized Nutrition for Healthy Aging

Logan Austin, Emilia Palmer; Australia
Research Area: Health and Medical Engineering

Impact of High-Fiber Diets on Depression in Older Adults

Kenta Masuda; Finland
Research Area: Health and Medical Engineering

Combined Impact of Physical Activity and Dietary Quality on Depression Symptoms in U.S. Adults: An Analysis of NHANES 2007-2020 Data

Oluwafunmibi Omotayo Fasanya, Augustine Kena Adjei; United States
Research Area: Health and Medical Engineering

Evaluation of Dietary Interventions to Prevent Sarcopenia and Depression in Older Adults

Lamees Al-Bahkali, Callum Allen; United States
Research Area: Health and Medical Engineering

Assessing the Impact of Community-Based Exercise Programs on Physical Activity Levels in Aging Populations

Daniela Sandu, Alexandru Botnari, Tatiana Ciobanu; Moldova
Research Area: Health and Medical Engineering

Next-Generation Neurofeedback Systems in Speech Therapy for Children with Neurological Disorders

Isabel Hart, Lucas Dawson, Imogen Kennedy; New Zealand
Research Area: Medical and Health Sciences

Neurostimulation Devices for Enhancing Speech Recovery in Children with Developmental Delays

Sofia Kounellis, Themis Andreou, Katerina Hadjisavva; Cyprus
Research Area: Medical and Health Sciences

The Impact of Equine-Assisted Therapy on Occupational Engagement for Children with Intellectual and/or Developmental Disabilities: From the Perspectives of the Children and Their Caregivers

Morgan Dempsey, Sam Lewis, Maggie Pierce, Alex Goodman; United States
Research Area: Medical and Health Sciences

Incorporating 3D Bioprinting Technologies for Customized Pediatric Rehabilitation Devices

Vo Van Khang; Vietnam
Research Area: Medical and Health Sciences

Advancements in Smart Orthoses for Improving Upper Limb Function in Pediatric Occupational Therapy

Alice Kennes; Belgium
Research Area: Medical and Health Sciences

The Impact of Artificial Intelligence on Pharmacology

Ramy Reda Morgan Kamel; Egypt
Research Area: Pharmacological and Pharmaceutical Sciences

Biocompatible Nanomaterials for Dental Implants

Neşe Alkan, Tahsin Erdem, Özge Güney; Türkiye
Research Area: Medical and Health Sciences

The Role of Surface Modification in Dental Implant Osseointegration

Daniela Rojas, Agustin Ruiz; United Kingdom
Research Area: Medical and Health Sciences

The Impact of Nanofillers on the Physical and Mechanical Properties of Dental Composites

Arianna Mancini, Enrico Bruno; Canada
Research Area: Medical and Health Sciences

Finite Element Analysis of Dental Implant for Prosthesis

Mayur Chaudhari, Ashutosh Gaikwad, Shubham Kavathale, Aditya Mule, Dilip Panchal, Puja Verma; India
Research Area: Materials and Metallurgical Engineering

Development of Biocompatible Materials for Dental Crowns

Minami Nishida; Hong Kong
Research Area: Materials and Metallurgical Engineering

Innovative Biomaterials for Enhanced Support in Bone Regeneration

Hamad Al-Shamrani; Netherlands
Research Area: Materials and Metallurgical Engineering

Nanostructured Biomaterials for Improved Crown Longevity

Tomas Diaz; Greece
Research Area: Materials and Metallurgical Engineering

Applications of Graphene-Based Biosensors in Medical Diagnostics

Zayed Al-Ghamdi, Dina Al-Yamani, Ahmed Al-Naimi; United Arab Emirates
Research Area: Biomedical and Biological Engineering

Development of Point-of-Care Biosensors for Rapid Disease Screening

Tadas Jonaitis; Lithuania
Research Area: Biomedical and Biological Engineering

All-In-One Universal Cartridge Based Truly Modular Electrolyte Analyzer

S. Dalvi, N. Sane, V. Patil, D. Bansode, A. Tharakan, V. Mathur; India
Research Area: Biomedical and Biological Engineering

Electrochemical Biosensors for Early Detection of Pathogens

Bai Jie; Taiwan
Research Area: Biomedical and Biological Engineering

Integration of Flexible Electronics in Wearable Biosensors

Benas Jonaitis, Migle Kazlauskaite, Edvinas Petraitis; Lithuania
Research Area: Biomedical and Biological Engineering

Synthesis and Characterizations of Lead-free BaO-Doped TeZnCaB Glass Systems for Radiation Shielding Applications

Rezaul K. Sk., Mohammad Ashiq, Avinash K. Srivastava; India
Research Area: Health and Medical Engineering

Comparative Performance of Standing Whole Body Monitor and Shielded Chair Counter for In-vivo Measurements

M. Manohari, S. Priyadharshini, K. Bajeer Sulthan, R. Santhanam, S. Chandrasekaran, B. Venkatraman; India
Research Area: Health and Medical Engineering

Numerical Response of Coaxial HPGe Detector for Skull and Knee Measurement

Pabitra Sahu, M. Manohari, S. Priyadharshini, R. Santhanam, S. Chandrasekaran, B. Venkatraman; India
Research Area: Health and Medical Engineering

Numerical Response of Planar HPGe Detector for 241Am Contamination of Various Shapes

M. Manohari, Himanshu Gupta, S. Priyadharshini, R. Santhanam, S. Chandrasekaran, B. Venkatraman; India
Research Area: Health and Medical Engineering

Advanced Dosimetry Techniques for Accurate Radiation Monitoring

Pascal Simon, Jessica Meier; France
Research Area: Health and Medical Engineering

Performance Optimization of Nanomaterial-Enhanced Biosensors

Gints Meiere, Ilze Feldmane; Latvia
Research Area: Biomedical and Biological Engineering

Monte Carlo Simulation of Gamma-Ray Attenuation in Oxide Shields

Kristina Milosevic, Milos Cvetkovic, Aleksandra Tadic; Serbia
Research Area: Health and Medical Engineering

Cyberstalking as an Online Sexual Harassment: Evidence from Experience from Female University Students in Tanzanian Institutions of Higher Learning

Angela Mathias Kavishe; Tanzania
Research Area: Health and Medical Engineering

Development of High-Temperature Sensors for Monitoring Melt Radiation

Anika Harrell; Germany
Research Area: Health and Medical Engineering

Impact of Material Thickness on Radiation Shielding Performance

Vinay Salvi, Pooja Gaikwad, Manoj Dhumal; Malaysia
Research Area: Health and Medical Engineering

Difference Between Planning Target Volume (PTV) Based Slow-Ct and Internal Target Volume (ITV) Based 4DCT Imaging Techniques in Stereotactic Body Radiotherapy for Lung Cancer: A Comparative Study

Madhumita Sahu, S. S. Tiwary; India
Research Area: Medical and Health Sciences

Development of Bioconjugated Contrast Agents for Improved Lung Cancer Imaging

Florencia Molina, Alejandro Vargas; United States
Research Area: Medical and Health Sciences

Impact of Machine Learning Algorithms on Lung Cancer Image Analysis

Nicholas Clarke, Anika Reid; Hungary
Research Area: Medical and Health Sciences

High-Resolution CT Imaging for Early Detection of Small Lung Nodules

Merike Ots; Estonia
Research Area: Medical and Health Sciences

Innovative PET-CT Imaging for Staging and Monitoring Lung Cancer Progression

Yasmin Al-Nour, Hassan Al-Hazmi, Zainab Al-Bishi; Kuwait
Research Area: Medical and Health Sciences

Role of Nanoparticle-Enhanced MRI in Lung Cancer Diagnosis

Francesca Colman; Netherlands
Research Area: Medical and Health Sciences

Neuroimaging Studies of Brain Connectivity in Autism Spectrum Disorder

Khalid Al-Qattan; Bahrain
Research Area: Medical and Health Sciences

Genetic Markers and Their Role in Autism Susceptibility

Vandana More, Kunal Apte; India
Research Area: Medical and Health Sciences

Behavioral Interventions and Their Long-Term Effects on Autism

Sora Yamada; United States
Research Area: Medical and Health Sciences

Development of AI-Powered Apps for Autism Spectrum Disorder Screening

Zoe Heylen; Belgium
Research Area: Medical and Health Sciences

Employed Mothers’ Narratives of Caring for their Children with Autism ( second submission for Mumbai)

Sharlene Fernandes; India
Research Area: Medical and Health Sciences

Effectiveness and Safety of Vitamin D3 Supplementation in Children across India: A Retrospective Study

Gunjal Vijaya, Madkholkar Nishikant, Pawar Roshan, Sharma Akhilesh; India
Research Area: Medical and Health Sciences

To Compare Norepinephrine and Norepinephrine with Methylene Blue for the Management of Septic Shock

K. Rajarajeswaran, Krishna Prasad; India
Research Area: Medical and Health Sciences

Long-Term Outcomes of Multimodal Analgesia in Chronic Pain Syndromes Post-Surgery

Veysel Bayram, Elvan Şentürk, Kemal Uzun, Neslihan Özsoy, Fikret Çetin; Türkiye
Research Area: Medical and Health Sciences

Critical Care Management of Postoperative Respiratory Complications in the Obstetric Patient

Nino Beridze, Giorgi Kapanadze, Tamar Gelashvili, Luka Maisuradze; Georgia
Research Area: Medical and Health Sciences

Evaluation of New Analgesic Agents for Chronic Pain Management

Shohei Taniguchi; Canada
Research Area: Medical and Health Sciences

Single-Bolus Methylene Blue Infusion in Septic Shock: A Clinical Study

Niels Bakker; Netherlands
Research Area: Medical and Health Sciences

Development of Smart Infusion Pumps for Anesthetic Administration

T. Chisholm; France
Research Area: Medical and Health Sciences

Impact of Targeted Electromagnetic Frequency on Pain Reduction in Post-Surgical Recovery

Arnaud Debus; Luxembourg
Research Area: Medical and Health Sciences

Effectiveness of Frequency-Tuned Neurostimulation Devices for Treating Neuropathic Pain

Gayane Avetisyan, Tigran Simonyan, Lilit Melkonyan; Armenia
Research Area: Medical and Health Sciences

Design and Application of Low-Frequency Pulse Devices for Acute Pain Treatment in Clinical Settings

Charlie Lawson, Faith Clarke; Canada
Research Area: Medical and Health Sciences

Wrist Pain, Technological Device Used, and Perceived Academic Performance among the College of Computer Studies Students

Regine B. Ojastro, Jhuvie Jane R. Maquiling, Loreille Marie B. Peroja, Joy Angel A. Pinili, Marielle Irene B. Villavicencio, Genia Gail M. Salve, Alther Francis Garth B. Yap; Philippines
Research Area: Medical and Health Sciences

Comparative Analysis of Different Frequency Ranges in Pain-Relief Devices for Fibromyalgia Patients

Ahmad Al-Fahad, Bella Hamilton; Canada
Research Area: Medical and Health Sciences

Scaling up Small and Sick Newborn Care Through the Establishment of the First Human Milk Bank in Nepal

Prajwal Paudel, Shreeprasad Adhikari, Shailendra Bir Karmacharya, Kalpana Upadhyaya; Nepal
Research Area: Medical and Health Sciences

Pioneering Non-Invasive Diagnostic Tools for Pediatric Infectious Diseases

Alessia Caruso; Finland
Research Area: Medical and Health Sciences

Precision Pediatrics Approaches in the Treatment of Genetic Disorders in Children

Tang Meiyu; Singapore
Research Area: Medical and Health Sciences

Breastfeeding Interventions and Their Impact on Reducing Newborn Mortality in Developing Nations

Colton Leontios, Alessandro Romano; United Kingdom
Research Area: Medical and Health Sciences

Impact of Global Human Milk Bank Expansion on Pediatric Nutrition and Infant Health

Orhan Topal, Leyla Kurtuluş; Türkiye
Research Area: Medical and Health Sciences

Exploring Chinese Nurses’ Views on Alternative Medicine

Hui Chen, Huping Gong, Yalin Mao; China
Research Area: Nursing and Health Sciences

Alternative Therapies in Nursing Practice A Systematic Review of Recent Clinical Trials

Nanami Ueda; Portugal
Research Area: Nursing and Health Sciences

Understanding Nurses' Perceptions of Alternative Medicine in Palliative Care Settings

Saleh Al-Mansour, Ibrahim Al-Mouallimi; United States
Research Area: Nursing and Health Sciences

Comparative Analysis of Herbal and Pharmaceutical Interventions in Pain Management

Ren Nishikawa; Japan
Research Area: Nursing and Health Sciences

Exploring the Integration of Traditional Medicine Practices in Modern Nursing Care Models

Paul Sopi, Peter Thomson; Korea, South
Research Area: Nursing and Health Sciences

fertilAIser: The AI-optimised Nitrogen Use Efficiency App for Agriculture

Tiina Roose; United Kingdom
Research Area: Agricultural and Biosystems Engineering

Mathematical Modeling of Nitrogen Dynamics in Fertilized Agricultural Systems

Elodie Giraud; France
Research Area: Agricultural and Biosystems Engineering

Effects of Sustainable Farming Practices on Soil Health and Crop Yield: A Case Study from Germany

Alan Gruber, Loretta Alda; Netherlands
Research Area: Agricultural and Biosystems Engineering

Mathematical Models for Predicting Nitrogen Leaching and Fertilizer Efficiency in Sandy Soils

Nursultan Ospanov, Raushan Zhaparova, Saken Sarsenov, Talgat Alimzhanov; Kazakhstan
Research Area: Agricultural and Biosystems Engineering

Impact of Controlled-Release Fertilizers on Nitrogen Use Efficiency in High-Yield Crops

Matteo Marini; United States
Research Area: Agricultural and Biosystems Engineering

Green Bonds as a Financing Mechanism for Energy Transition in Emerging Markets: The Case of Morocco

Abdelhamid Nechad, Ahmed Maghni, Khaoula Zahir; Morocco
Research Area: Economics and Management Engineering

Risk and Return on Green Bonds: Accounting for Climate Impact and Energy Transition in Financial Markets

Misaki Sugiyama, Ryota Kaneko, Rina Hayashi; Czechia
Research Area: Economics and Management Engineering

Linking Emission Reduction Targets with Corporate Debt Instruments in the Context of Sustainable Finance

Diarmuid Egan, Eithne Carr; Ireland
Research Area: Economics and Management Engineering

Impact of Energy Transition Policies on Emissions Trading Systems and Corporate Accounting Standards

Fatima Al-Shehri, Maha Al-Najdi; United Kingdom
Research Area: Economics and Management Engineering

Carbon Pricing Mechanisms and Their Effect on Corporate Debt Financing for Energy Transition

Evelina Jarutis; Lithuania
Research Area: Economics and Management Engineering

Interior Noise Reduction of Construction Equipment Vehicle

Pradeep Jawale, Sharad Supare, Sachin Kumar Jain, Nagesh Walke; India
Research Area: Environmental and Ecological Engineering

A Review of Noise Reduction Techniques for Interior Spaces

Ntombizodwa Xulu, Lungelo Mtshali; South Africa
Research Area: Environmental and Ecological Engineering

Acoustic Modeling and Simulation for Predicting Interior Noise Levels

Pauline Lemoine; France
Research Area: Environmental and Ecological Engineering

Innovations in Noise-Canceling Materials for Office Environments

Miles Blythe, Carlo Fabbri; United Kingdom
Research Area: Environmental and Ecological Engineering

Real-Time Noise Source Identification Using Sensor Networks

Roman Sutter; Spain
Research Area: Environmental and Ecological Engineering

A Comparative Study of Noise Reduction Strategies for Residential and Commercial Buildings

Nicolas Torres, Catalina Jimenez; Switzerland
Research Area: Environmental and Ecological Engineering

Evidence of Groundwater Reservoirs Associated with Fault Structures and Magmatic Dyke Intrusions: Insights from Geophysics and Well Data Analysis in Central Cameroon

Mbida Yem, Alessandra Ribodetti, Joseph Quentin Yéné Atangana, Fabrice Jouffray, Dieudonné Bisso; Cameroon
Research Area: Geological and Environmental Engineering

Développement de Matériaux Écologiques à Base de Résine Micro-Chargée : Étude des Procédés et Optimisation des Mélanges

CHENINE HALIMA, OUINAS DJAMEL, BEKKI HAMED ESSIDDIK; Algeria
Research Area: Materials and Metallurgical Engineering

Development of Eco-friendly Materials Based on Micro-filled Resin: Process Study and Mixture Optimization

Chenine Halima, Ouinas Djamel, Bekki Hamed Essiddik; Algeria
Research Area: Materials and Metallurgical Engineering

Gc-ms Data Integrated Chemometrics for the Authentication of Vegetable Oil Brands in Minna, Niger State, Nigeria

Rasaq Bolakale Salau, Maimuna Muhammad Abubakar, Jonathan Yisa, Muhammad Tauheed Bisiriyu, Jimoh Oladejo Tijani, Alexander Ifeanyi Ajai; Nigeria
Research Area: Chemical and Molecular Engineering

Synthesis of Highly Efficient Bio-Octane Number Booster Using Nano Au-NiAlZr-Layered Double Hydroxides Catalyst

Bachir Redouane, Dib Nihel, Bedrane Sumeya, Blanco Ginesa, Calvino José Juan; Algeria
Research Area: Chemical and Molecular Engineering

Development of Catalysts for Efficient Hydrogen Production from Water Splitting

Nguyen Van Anh, Le Thi Binh; Vietnam
Research Area: Chemical and Molecular Engineering

Advanced Materials for High-Performance Energy Storage Systems

Patryk Kalinowski, Beata Ostrowska, Kamil Zawadzki; Poland
Research Area: Chemical and Molecular Engineering

Application of Nanotechnology in Enhancing Chemical Reaction Rates

Rania Al-Saadi, Hannah Spencer; United Kingdom
Research Area: Chemical and Molecular Engineering

Innovations in Biodegradable Polymers for Sustainable Packaging Solutions

Dorde Kostic, Zorana Petrovic, Uros Kuzmanovic; Serbia
Research Area: Chemical and Molecular Engineering

Design and Synthesis of Novel Pharmaceuticals Using Flow Chemistry

Diana Petcu, Adrian Stanciu, Liliana Marin; Romania
Research Area: Chemical and Molecular Engineering

Characterization of InP Semiconductor Quantum Dot Laser Diode after Am-Be Neutron Irradiation

Abdulmalek Marwan Rajkhan, M. S. Al Ghamdi, Mohammed Damoum, Essam Banoqitah; Saudi Arabia
Research Area: Materials and Metallurgical Engineering

Ion Beam Irradiation Effects on the Optical Properties of Nanomaterials

Antonio Rizzi; Korea, South
Research Area: Materials and Metallurgical Engineering

Self-Healing Polymers: Progress and Applications in Engineering

Vasile Stratulat, Maria Berlinschi; Hungary
Research Area: Materials and Metallurgical Engineering

Development of Superhydrophobic Surfaces for Industrial Applications

Martina Leone, Lorenzo Ferrara; New Zealand
Research Area: Materials and Metallurgical Engineering

Quantum Confinement Effects in Semiconductor Nanocrystals

Calvin Muno; Korea, South
Research Area: Materials and Metallurgical Engineering

Graphene-Based Nanocomposites for Energy Storage Applications

Niamh Walsh, Conor Byrne; Hong Kong
Research Area: Materials and Metallurgical Engineering

Innovative Composite Materials for Lightweight Structural Components

Pia Turk; Slovenia
Research Area: Materials and Metallurgical Engineering

Advanced Nanostructured Materials for Enhanced Mechanical Performance

Martin Ramirez; Croatia
Research Area: Materials and Metallurgical Engineering

Low Temperature Synthesis of Styrene via Catalytic Dehydrogenation of Ethylbenzene Using Vanadia Support SnO₂ Catalysts

S. Said, Samira M. Abdel-Azim, Aya M. Matloob; Egypt
Research Area: Materials and Metallurgical Engineering

Computational Methods for Solving Partial Differential Equations

Fintan Flynn, Muireann Hanley; Ireland
Research Area: Mathematical and Computational Sciences

Computational Fluid Dynamics Simulations of Turbulent Flows: A Probabilistic Perspective

Marek Ondrejka, Jana Vesela; Slovakia
Research Area: Mathematical and Computational Sciences

Optimization Algorithms for Large-Scale Data Analysis

Sanjay Bansode; India
Research Area: Mathematical and Computational Sciences

Riesz Mixture Model for Brain Tumor Detection

Mouna Zitouni, Mariem Tounsi; Tunisia
Research Area: Mathematical and Computational Sciences

A Novel Algorithm for Image Segmentation Based on Probabilistic Graphical Models

Saowalak Wongwat, Jirawat Phetkanha; Thailand
Research Area: Mathematical and Computational Sciences

Generation Solitary Waves for Viscous Flow over a Hole

Mohammed Daher Albalwi; Saudi Arabia
Research Area: Aerospace and Mechanical Engineering

Quantum Computing for Post-Quantum Cryptography

Giselle Elizabeth Franco, Gabriel Esteban Sosa, Pamela Nicole Ayala; Paraguay
Research Area: Computer and Information Engineering

Investigating Cloud Forensics: Challenges, Tools, and Practical Case Studies

Noha Badkook, Maryam Alsubaie, Samaher Dawood, Enas Khairullah; Saudi Arabia
Research Area: Computer and Information Engineering

Biometric Authentication: A Comprehensive Review

Swati Mehta, Ashwin Shetty, Manisha Jadhav; Indonesia
Research Area: Computer and Information Engineering

Formal Verification of Cyber-Physical Systems

Aditya Saputra, Rani Puspita, Dinda Rahmawati; Indonesia
Research Area: Computer and Information Engineering

Multi-Scale Control Model for Network Group Behavior

Fuyuan Ma, Ying Wang, Xin Wang; China
Research Area: Computer and Information Engineering

Source Identification Model Based on Label Propagation and Graph Ordinary Differential Equations

Fuyuan Ma, Yuhan Wang, Junhe Zhang, Ying Wang; China
Research Area: Computer and Information Engineering

Optimization of Influence Blocking Strategies in Social Networks

Nilgün Candan, Veli Bayraktar; Türkiye
Research Area: Computer and Information Engineering

Role of Sensor Networks in Analyzing Social Group Interactions

Constanza Orellana, Bautista Rebolledo, Camila Jorquera, Rafael Vera; Peru
Research Area: Computer and Information Engineering

Impact of Social Network Structures on Influence Propagation Dynamics

Tara Reeve; Japan
Research Area: Computer and Information Engineering

User Experience Design for Effective Web-Based Information Systems

Tadhg Moloney; Norway
Research Area: Computer and Information Engineering

Web Browser Forensics: Tools, Techniques, and Case Studies for Investigating Digital Traces

Hissah Alabbadi, Samar Althagafi, Bayan Baz, Enas Khairullah; Saudi Arabia
Research Area: Computer and Information Engineering

Dual Band LoRa/GPS Dipole Antenna with Harmonic Suppression Capability

Amar Danial Abd Azis, Shipun Anuar Hamzah, Mohd Noh Dalimin, Khairun Nidzam Ramli, Mohd Sani Yahya, Fauziahanim Che Seman; Malaysia
Research Area: Electronics and Communication Engineering

Experimental and Numerical Study on the Performance of Vertical Axis Wind Turbines with Helical Blades

Ahmed S. Saad, Shinichi Ookawara, Mahmoud Ahmed; Egypt
Research Area: Energy and Power Engineering

Performance Analysis of Perovskite Solar Cells under Different Operating Conditions

Rajiv Bhagat, Prachi Shah; India
Research Area: Energy and Power Engineering

Thermal and Electrical Characteristics of Hybrid Photovoltaic-Thermal Systems

Kyle Alves; Germany
Research Area: Energy and Power Engineering

Performance Analysis of Next-Generation Hybrid Wind-Solar Systems

Aris Bolelli; Greece
Research Area: Energy and Power Engineering

Advanced Algorithms for Predicting Energy Conversion Efficiency in Photovoltaic Cells

Rekha Purohit, Pravin Sawant, Smita Patankar; India
Research Area: Energy and Power Engineering

Study of Hybrid Cells Based on Perovskite Materials Using Oghmasimultion

Nadia Bachir (Dahmani), Fatima Zohra Otmani; Algeria
Research Area: Energy and Power Engineering

The Effect of an Electric Field on the Falling Film Evaporation

Abdelaziz Nasr; Saudi Arabia
Research Area: Energy and Power Engineering

Assessment of Smart Building Systems on Occupant Behavior

Federica T. Garcia; Japan
Research Area: Architectural and Environmental Engineering

Use of Recycled Materials in Sustainable Building Construction

Gaia Vitale, Roberto Giordano; Sweden
Research Area: Architectural and Environmental Engineering

Psychological Benefits of Sustainable Architectural Design

Natalija Atanasova, Stefan Todorov, Biljana Velkovska, Goran Ivanov, Ana Petrova, Darko Stojanov; North Macedonia
Research Area: Architectural and Environmental Engineering

Environmental Sustainability in Ithra

Rawan Alsubaie; Saudi Arabia
Research Area: Architectural and Environmental Engineering

Integration of Renewable Energy Systems in Modern Architectural Design

Meena Kale; Iceland
Research Area: Architectural and Environmental Engineering

Advanced Air Filtration Systems for Improved Indoor Air Quality

Rania Al-Thani, Turki Al-Anwar, Hana Al-Hashemi, Ibrahim Al-Ajlan; Saudi Arabia
Research Area: Architectural and Environmental Engineering

Application of Drones in Crop Monitoring and Pest Control

Josefina Carrasco, Lautaro Soto, Rosario Aguirre; Chile
Research Area: Agricultural and Biosystems Engineering

Evaluating the Effectiveness of Biofertilizers in Sustainable Agriculture

Stefan Lungu, Amalia Nistor, Lucian Moise; Romania
Research Area: Agricultural and Biosystems Engineering

Advanced Soil Sensors for Real-Time Nutrient Monitoring

Nour Al-Khaled, Salem Al-Mutairi; Croatia
Research Area: Agricultural and Biosystems Engineering

Impact of Drought-Resistant Varieties on Crop Productivity

Dariusz Chmielewski, Kinga Sliwinska, Damian Borkowski, Justyna Olszewska; Poland
Research Area: Agricultural and Biosystems Engineering

Improvement of Salinity Stress Tolerance in Chickpea Using Osmoregulants Proline and Glycinebetaine

MAHMOUD AHMED KHATER; Egypt
Research Area: Agricultural and Biosystems Engineering

Nutritional Evaluation of Seseame Seed Husk as a Source of Fibre in the Diets of Broiler Chickens

Maidala A., Bizi A. G., Olaoyo T. G., Lawan Amaza B. I., Makinde O. J., Sudik S. D.; Nigeria
Research Area: Animal and Veterinary Sciences

Advanced Imaging Techniques for Diagnosing Musculoskeletal Disorders

Taiga Fujita, Hina Ogawa; Taiwan
Research Area: Animal and Veterinary Sciences

Performance Analysis of Automated Feeding Systems in Dairy Farming

Saeed Al-Otaibi; Italy
Research Area: Animal and Veterinary Sciences

Impact of Genetic Engineering on Growth Performance in Livestock

Audrey Plaza; Denmark
Research Area: Animal and Veterinary Sciences

Advancements in Nutritional Supplements for Enhancing Animal Production

Miao Yi, Tan Lei, Fu Ming; Taiwan
Research Area: Animal and Veterinary Sciences

Role of Probiotic-Rich Diets in Reducing Inflammatory Biomarkers

Owen Burgess; Canada
Research Area: Nutrition and Food Engineering

Innovative Nutraceuticals for the Management of Chronic Inflammatory Diseases

Natsuki Iwata; France
Research Area: Nutrition and Food Engineering

Nanotechnology in Enhancing Bioavailability of Anti-Obesity Compounds

Nicolas Sosa, Camila Ibarra, Martin Maldonado; Colombia
Research Area: Nutrition and Food Engineering

Integration of Personalized Nutrition Plans in Obesity Management

Alessio Gatti; Italy
Research Area: Nutrition and Food Engineering

Association of the Frequency of the Dairy Products Consumption by Students and Health Parameters

Radyah Ivan, Khanferyan Roman; Russia
Research Area: Nutrition and Food Engineering

Immune Disregulation in Inflammatory Skin Diseases with Comorbid Metabolic Disorders

Roman Khanferyan, Levon Gevorkyan, Ivan Radysh; Russia
Research Area: Nutrition and Food Engineering

Genetic Markers for Enhancing Drought Tolerance in Crop Plants

Elisa Benedetti, Giovanni Grassi, Elena Lombardi; Hungary
Research Area: Agricultural and Biosystems Engineering

Advanced Genotyping Techniques for Assessing Plant Genetic Diversity

Jolien Smit, Ruud Vos, Femke Gerritsen; Netherlands
Research Area: Agricultural and Biosystems Engineering

Development of Stress-Resilient Plant Varieties Using Marker-Assisted Selection

Satish Thakur; India
Research Area: Agricultural and Biosystems Engineering

Morpho-Agronomic Response to Water Stress of Some Nigerian Bambara Groundnut (Vigna Subterranea (L.) Verdc.) Germplasm and Genetic Diversity Studies of Some Selected Accessions Using Ssr Markers

Abejide Dorcas Ropo,, Falusi Olamide Ahmed, Daudu Oladipupo Abdulazeez Yusuf, Salihu Bolaji Zuluquri Neen, Muhammad Liman Muhammad, Gado Aishatu Adamu; Nigeria
Research Area: Agricultural and Biosystems Engineering

Evaluating Genetic Markers in Plant Breeding for Improved Yield Under Water Stress

Ahmed Ali, Fatima Ibrahim, Mohamed Hassan; Egypt
Research Area: Agricultural and Biosystems Engineering

The Impact of Technology on Food Science and Nutrition

Amera Karam Khalifa Robil; Egypt
Research Area: Nutrition and Food Engineering

Next-Generation Composite Glass Filters for Reducing Microbial Contaminants in Drinking Water

Cillian Hayes, Eoin Kennedy; Greece
Research Area: Environmental and Ecological Engineering

Innovative Aqua Lens Systems for Enhancing Solar Water Disinfection Efficiency

Lea Kirch; France
Research Area: Environmental and Ecological Engineering

Solar Disinfection Potentials of Aqua Lens, Photovoltaic and Glass Bottle Subsequent to Plant‑Based Coagulant: For Low‑Cost Household Water Treatment Systems

Yonas Lamore, Abebe Beyene, Samuel Fekadu, Moa Megersa; China
Research Area: Environmental and Ecological Engineering

Advanced Glass-Based Membrane Technologies for Sustainable Water Treatment Applications

Noah Buyse, Zhao Wenjie; China
Research Area: Environmental and Ecological Engineering

Nanocoated Glass Surfaces for Improved UV Disinfection in Municipal Water Systems

Salma Al-Hamdan; Saudi Arabia
Research Area: Environmental and Ecological Engineering

Prevalence and Epidemiological Distribution of Indicators of Pathogenic Bacteria in Households Drinking Water in Ethiopia: A Systematic Review and Meta-Analysis

Ermias Alemayehu Adugna, Abel Weldetinsae, Zinabu Assefa Alemu, Alemneh Kabeta Daba, Daniel Abera Dinssa, Tiruneh Tariku, Mesaye Getachew Weldegebriel, Melaku Gizaw Serte, Kirubel Tesfaye Teklu, Moa Abate Kenea, Gebretsadik Keleb Yehuala, Masresha Tessema, Aderajew Mekonnen Girmay; Ethiopia
Research Area: Environmental and Ecological Engineering

Monitoring Urban Pollution Using Next-Generation Satellites

Ali Al-Bilawi, Nada Al-Sarhan; Saudi Arabia
Research Area: Environmental and Ecological Engineering

New Insights Into Fog Role In Atmospheric Deposition Using Satellite Images

Suruchi; Czechia
Research Area: Environmental and Ecological Engineering

Advanced Remote Sensing Technologies for Pollution Detection

Benjamin Curtis; United Kingdom
Research Area: Environmental and Ecological Engineering

Deposition Patterns of Heavy Metals in Urban Environments

Camilla Valentini, Emanuele Pagano, Maria Carbone; Italy
Research Area: Environmental and Ecological Engineering

Impact of Web-Based Learning Platforms on Physics Education Outcomes

Maro Anastasiou; Germany
Research Area: Physical and Mathematical Sciences

The Impact of Technology on Physics Development

Fady Gaml Malk Mossad; Egypt
Research Area: Physical and Mathematical Sciences

Integration of Augmented Reality in Physics Education for Practical Learning

Laura Broekx, Lisa Daems; Belgium
Research Area: Physical and Mathematical Sciences

Web-Based Tools for Interactive Physics Simulations

Sofia Pena, Mateo Castro, Valeria Roldan; Argentina
Research Area: Physical and Mathematical Sciences

Smartphone Applications for Practical Physics Experiments

Shella Aprilia, Galuh Widya, Ramadhan Ardiansyah; Indonesia
Research Area: Physical and Mathematical Sciences

Distance Learning Solutions for Advanced Physics Courses

Mohammed Al-Ruwaili, Amal Al-Zayani; Qatar
Research Area: Physical and Mathematical Sciences

Mechanical Deformation Strategies for Strengthening Biodegradable Plastic Bag Materials

Robin Hoekstra; Malta
Research Area: Industrial and Manufacturing Engineering

Implementation of Smart Process Flow Optimization in the Plastic Bag Manufacturing Sector

Aidan Kelleher; Czechia
Research Area: Industrial and Manufacturing Engineering

Continuous Manufacturing Systems for High-Performance Plastic Bag Production Processes

Yuna Fujimoto; Germany
Research Area: Industrial and Manufacturing Engineering

The Impact of Artificial Intelligence on Plastic Bag Industry

Adel Younan Thabet Khalil; Egypt
Research Area: Industrial and Manufacturing Engineering

Advanced Deformation Techniques in the Plastic Industry to Enhance Product Durability

Maeve Gallagher, Darragh Murray; Finland
Research Area: Industrial and Manufacturing Engineering

Development of Novel Organometallic Catalysts for Carbon-Carbon Bond Formation

Sanne Holmberg, Patrick From; Denmark
Research Area: Chemical and Molecular Engineering

High-Throughput Screening of Organometallic Catalysts for Industrial Applications

Renata Czarnecka, Andrzej Sadowski, Iwona Sawicka; Poland
Research Area: Chemical and Molecular Engineering

Design and Synthesis of Organometallic Catalysts for Asymmetric Reactions

Elisa Guerra, Pietro Rinaldi; Italy
Research Area: Chemical and Molecular Engineering

Performance of the SrSnO₃/SnO₂ Nanocomposite Catalyst on the Photocatalytic Degradation of Dyes

H. Boucheloukh, N. Aoun, M. Denni, A. Mahrouk, T. Sehili; Algeria
Research Area: Chemical and Molecular Engineering

Redefining Solar Generation Estimation: A Comprehensive Analysis of Real Utility Advanced Metering Infrastructure (AMI) Data from Various Projects in New York

Haowei Lu, Anaya Aaron; United States
Research Area: Energy and Power Engineering

Dynamic Modelling of Photovoltaic Systems to Mitigate Energy Fluctuations in Power Grids

Youssef Mahmoud; Finland
Research Area: Energy and Power Engineering

Energy Fluctuation Management in Large-Scale Photovoltaic Systems Using Advanced Inverter Technologies

Niall Healy; Ireland
Research Area: Energy and Power Engineering

Off Design Modelling of 650MW Combined Cycle Gas Turbine Power Plant Integrated with a Retrofitted Inlet Fogging System

Osarobo Omorogieva Ighodaro, Josephus Otejere; Nigeria
Research Area: Energy and Power Engineering

Design and Implementation of Modular Energy Storage Units for Intermittent Solar Power Systems

Afrah Al-Ghaili; Oman
Research Area: Energy and Power Engineering

Uncertainty Analysis in Solar Power Generation for Enhanced System Design and Efficiency

Celine Stoll, Dominik Steiner; Sweden
Research Area: Energy and Power Engineering

Stochastic Modelling of Solar Energy Systems for Improved Reliability in Variable Weather Conditions

Layla Al-Salem, Hala Al-Rashed; Germany
Research Area: Energy and Power Engineering

Effect of Bio-Inspired Trailing Edges and Vortex Generators on Aerodynamic Performance

Amr Khedr; United States
Research Area: Energy and Power Engineering

The Integration of Artificial Intelligence in Cybersecurity: Enhancing Threat Detection, Mitigation, and Addressing Ethical Challenges in Modern Digital Systems

Amanuel Asfaw; Ethiopia
Research Area: Computer and Systems Engineering

Eco-Friendly Interior Materials for Enhancing Indoor Air Quality in Public Buildings

Mariam Al-Faisal, Laila Al-Kadi; Kuwait
Research Area: Structural and Construction Engineering

A Validated Estimation Method to Predict the Interior Wall of Residential Buildings Based on Easy to Collect Variables

B. Gepts, E. Meex, E. Nuyts, E. Knaepen, G. Verbeeck; Belgium
Research Area: Structural and Construction Engineering

Conservation Techniques for Heritage Buildings Using Modern Repair and Restoration Materials

Paolo Sartori, Beatrice Neri, Nicola Marchetti; Italy
Research Area: Structural and Construction Engineering

Functionally Graded Concrete for Enhanced Durability in Aggressive Environments

Milan Krstic, Jovana Kostic, Darko Stevanovic, Danijela Bogdanovic, Srdjan Milenkovic; Serbia
Research Area: Civil and Environmental Engineering

Advanced Fire-Resistant Materials for Interior Applications in Commercial and Residential Buildings

Silvia Olaru, Horia Tudor; Romania
Research Area: Structural and Construction Engineering

Smart Inventory Management Systems for Construction Material Stock in Large Urban Areas

Tasos Vasilakis, Eleni Karatza; Greece
Research Area: Structural and Construction Engineering

Application of Non-Destructive Testing in Monitoring Concrete Water Absorption

Maria Berlinschi, Ion Sturza, Cristina Cojocaru; Moldova
Research Area: Civil and Environmental Engineering

Assessing the Effectiveness of Surface Treatments on Water Absorption

Keita Nomura, Sora Kojima, Airi Miura; Japan
Research Area: Civil and Environmental Engineering

Development of High-Performance Concrete for Acidic Environments

Ronan Kavanagh; Sweden
Research Area: Civil and Environmental Engineering

Assessment of Intra-City Road Infrastructure in Ado-Ekiti, Ekiti State, Nigeria

Aruna Kemisola Kehinde, Oyinloye Michael Ajide, Aboluje Oluwafemi Bolarinwa; Nigeria
Research Area: Urban and Civil Engineering

Effect of Sodium Hydroxide on Geotechnical Properties of Soft Soil in Kathmandu Valley

Bal Deep Sharma, Suresh Ray Yadav; Nepal
Research Area: Geotechnical and Geological Engineering

Durability of Functionally Graded Concrete

Prasanna Kumar Acharya, Mausam Kumari Yadav; Nepal
Research Area: Civil and Environmental Engineering

Impact of Community-Based Ecotourism on Local Biodiversity

Stefan Blum, Katja Wenger; Spain
Research Area: Environmental and Ecological Engineering

Evaluating the Impact of Eco-Permitting Systems on Biodiversity Conservation

Mahir Uçar, Nazan Tarhan, Bülent Karadağ; Türkiye
Research Area: Environmental and Ecological Engineering

Government Policies and Their Effectiveness in Sustainable Ecotourism

Theodora Mavromatis, Petros Tsagaris, Vasiliki Damianos, Antonis Petridis; Greece
Research Area: Environmental and Ecological Engineering

Tourism and Protected Areas: Challenges and Opportunities in Context of Arunachal Pradesh

Taba Tath; India
Research Area: Environmental and Ecological Engineering

Advanced Monitoring Technologies for Natural Resource Management

Aisling Nolan; Slovenia
Research Area: Environmental and Ecological Engineering

Autonomous Drones in Disaster Management: Case Studies and Innovations

Laura Fontana, Gavin Barta; Lithuania
Research Area: Aerospace and Mechanical Engineering

The Role of Sensor Fusion in Autonomous Drone Navigation Systems

Dimitra Kalogirou, Leonidas Samaras; Greece
Research Area: Aerospace and Mechanical Engineering

Integration of Real-Time Positioning Systems in Manufacturing Robotics

Gerardo Medina, Natalia Rivas, Santiago Vega; Venezuela
Research Area: Aerospace and Mechanical Engineering

Optimization of Autonomous Drone Routes for Efficient Medical Supply Delivery

Lorcan Maguire, Sorcha Finn, Ruairí MacMahon; Ireland
Research Area: Aerospace and Mechanical Engineering

Advancements in Autonomous Drones for Enhanced Healthcare Logistics

Bhaargav Gupta P., Vignesh N., Nithish Kumar R., Rahul J., Nivetha Ruvah D.; India
Research Area: Aerospace and Mechanical Engineering

Phase Encoding Techniques in Quantum Communication Systems

Yvette Akram; Japan
Research Area: Physical and Mathematical Sciences

High-Fidelity Quantum State Encoding for Secure Data Transmission

Harvey Clarke; Australia
Research Area: Physical and Mathematical Sciences

Optimizing Quantum Machine Learning with Amplitude and Phase Encoding Techniques

Om Viroje; India
Research Area: Physical and Mathematical Sciences

Resilience of Quantum Sensors in Noisy Environments

Beka Tsiklauri, Mariam Bolkvadze, Nikoloz Kvaratskhelia; Georgia
Research Area: Physical and Mathematical Sciences

Quantum Noise Reduction in High-Precision Measurement Devices

Povilas Kairys; Latvia
Research Area: Physical and Mathematical Sciences

Energy Recovery Techniques in Distillation Towers for Reducing Operational Energy Consumption in Petrochemical Plants

Aarti Bhosale, Mahesh Kulkarni; Malaysia
Research Area: Mechanical and Industrial Engineering

Performance Enhancement of Combined Cycle Power Plants Through Supercritical CO₂ Brayton Cycle Integration

Ivan Herceg, Andrea Vukman; Croatia
Research Area: Mechanical and Industrial Engineering

The Effect of Cooling Tower Fan on the Performance of the Chiller Plant

Ankitsinh Chauhan, Vimal Patel, A. D. Parekh, Ishant patil; India
Research Area: Mechanical and Industrial Engineering

Energy-Efficient Cooling Systems for Industrial Applications

Ramona Visan; Romania
Research Area: Mechanical and Industrial Engineering

Optimization of Heat Exchanger Performance in Power Plants

Siim Viik, Kati Hein; Estonia
Research Area: Mechanical and Industrial Engineering

Detection of Rare Events in Large-Scale Data Using Advanced Techniques

Haruka Ishikawa; United Arab Emirates
Research Area: Computer and Information Engineering

Improving Detection Accuracy in Cyber-Physical Systems

Heba Abdel-Aziz; Germany
Research Area: Computer and Information Engineering

Multivariate Time-series Anomaly Detection Using Latent Stable Diffusion Models

Veena More, Ramesh K.; India
Research Area: Computer and Information Engineering

Advanced Anomaly Detection Techniques in Time Series Data

Irina Ciobanu; Malaysia
Research Area: Computer and Information Engineering

Innovative Approaches to Signal Detection in Noisy Environments

Carla Herrera; Singapore
Research Area: Computer and Information Engineering

Real-Time Pothole Detection Using YOLOv11

Kosuri Harshitha Durga, Ritesh Yaduwanshi; India
Research Area: Electrical and Computer Engineering

Biological Carbon Capture Technologies for Sustainable Energy Production

Simone Gordon, Andre Campbell, Tiffany Allen; Hungary
Research Area: Environmental and Ecological Engineering

Assessment of Wind and Solar Hybrid Systems for Rural Electrification

Huang Zixuan; China
Research Area: Environmental and Ecological Engineering

Exploring Sustainable Alternatives: A Comparative Study of Renewable Energy Sources in the Philippines

Chris Anthony Bagaoisan Javier; Philippines
Research Area: Environmental and Ecological Engineering

Impact of Renewable Energy Policies on Environmental Conservation

Pavlos Samaras, Angeliki Skoulis, Georgios Panos; Greece
Research Area: Environmental and Ecological Engineering

Development of High-Efficiency Energy Harvesting Materials

Ali Al-Morai; Kuwait
Research Area: Environmental and Ecological Engineering

Role of Bioenergy in Reducing Carbon Footprints

Rika Fukuda, Kazuki Yamazaki; Hong Kong
Research Area: Environmental and Ecological Engineering

Enhancing Sensor Precision for Real-Time Monitoring in Deep-Well Drilling Operations

Ellie Jenkins; Austria
Research Area: Geological and Environmental Engineering

Development of High-Resolution Seismic Sensors for Accurate Subsurface Imaging

Stefano Parisi, Francesca Sanna; Czechia
Research Area: Geological and Environmental Engineering

Smart Drilling Equipment for Increased Efficiency in Petroleum Exploration

Erina Arai; Australia
Research Area: Geological and Environmental Engineering

Advanced Equipment for Autonomous Mineral Extraction in Challenging Environments

Yasmeen Al-Qasim, Saeed Al-Motlaq; Saudi Arabia
Research Area: Geological and Environmental Engineering

Troubleshooting Petroleum Equipment Based on Wireless Sensors Based on Bayesian Algorithm

Vahid Bayrami Rad; Iran
Research Area: Geological and Environmental Engineering

The Impacts of Cultural Differences on Consumer Behavior when Multinational Corporations Enter the Chinese Market

Xue Junwei; Australia
Research Area: Social and Business Sciences

Analyzing Cross-Cultural Differences in Consumer Behavior towards Smart Wearables

Jorinde Veenstra; Netherlands
Research Area: Social and Business Sciences

Blockchain Applications in Securing International Marketing Transactions

Tadas Jonaitis, Kotryna Kazlauskaite; Lithuania
Research Area: Social and Business Sciences

Globalization and Its Influence on Consumer Behavior in Emerging Markets

Martha Aquilina; Norway
Research Area: Social and Business Sciences

Impact of Cultural Adaptation Strategies on Brand Success in Multinational Companies

Cathal Buckley; Croatia
Research Area: Social and Business Sciences

Consumer Engagement in Global E-Commerce Platforms Driven by Local Cultural Insights

Fabio Martini, Sara Pellegrini; Germany
Research Area: Social and Business Sciences

Effects on Cortical Thickness due to Musical Training in Elementary School Children: The Importance of Manual Structural Analysis

Saba Daneshmand, Assal Habibi; United States
Research Area: Cognitive and Language Sciences

Advancing Neuroimaging Techniques for Real-Time Cortical Thickness Mapping in Pediatric Populations

Saki Abe; Spain
Research Area: Cognitive and Language Sciences

The Impact of Music Therapy on Brain Function and Cognitive Performance in Neurodegenerative Diseases

Ruby Frost; United States
Research Area: Cognitive and Language Sciences

Neural Correlates of Musical Expertise: A Comparative Study of Musicians and Non-Musicians

Sonam Wangchuk, Pema Dorji, Tenzin Dema; Bhutan
Research Area: Cognitive and Language Sciences

Cortical Thickness Variability and its Relationship with Musical Training in Developing Brains

Valentina Lopez; Hungary
Research Area: Cognitive and Language Sciences

Predictive Analytics for Fraud Detection in Real-Time Financial Transactions

Zara Webb, Reuben Hayes; New Zealand
Research Area: Economics and Management Engineering

Self-Organizing Maps for Credit Card Fraud Detection and Visualization

Peng Chun-Yi, Chen Wei-Hsuan, Ueng Shyh-Kuang; Taiwan
Research Area: Economics and Management Engineering

Data Visualization Techniques for Understanding Complex Financial Markets

Camila Silva; France
Research Area: Economics and Management Engineering

Fraud Detection in E-Commerce Platforms Through Innovative Pattern Recognition Techniques

Karen Juhl, Nikolaj Ravn; Czechia
Research Area: Economics and Management Engineering

Advanced Risk Analysis in Financial Markets Using Real-Time Data Mapping Technologies

Daniel Bautista, Gabriela Villanueva; Philippines
Research Area: Economics and Management Engineering

Enhancing Economic Forecasting Accuracy Using Spatial Data Visualization Techniques

Gabriel Dragomir, Elena Vasile; Romania
Research Area: Economics and Management Engineering

Gender Pay Gap in Academia and Women's Career Advancement: An Exploratory Study from MENA

Fatima Zahrae Yaddar; Lebanon
Research Area: Educational and Pedagogical Sciences

Advancing Gender Equity in STEM Careers: The Role of Emerging Biotechnology in Closing the Gender Pay Gap

Sandile Mchunu, Nomfundo Ndaba, Siyabonga Mbele; South Africa
Research Area: Educational and Pedagogical Sciences

Innovative Approaches to Address Gender Disparities in Higher Education Employment: Insights from Smart Campus Solutions

Faisal Al-Ruwaili; United Kingdom
Research Area: Educational and Pedagogical Sciences

Transformative Impact of Hybrid Learning Models on Female Education in Developing Regions

Daniel Parry; United Arab Emirates
Research Area: Educational and Pedagogical Sciences

Gender Inequity in Academia: A Quantitative Study on Salary Gaps Using Big Data Analytics

Sorin Dinu; Portugal
Research Area: Educational and Pedagogical Sciences

Dynamic Modeling and Simulation of a Hybrid Electric Vehicle Powertrain

Kevin Brasseur; Lithuania
Research Area: Mechanical and Industrial Engineering

Optimization of Robot Trajectory Planning for Minimizing Energy Consumption

Mao Kuroda, Yuki Ono; Japan
Research Area: Mechanical and Industrial Engineering

Energy-Efficient Steering Systems: A Comparative Study of Hydraulic and Electric Power Steering

Justine Mayer, Benoît Steinmetz, Ingrid Boesch; Luxembourg
Research Area: Mechanical and Industrial Engineering

Kinematic Analysis of a Novel Parallel Robot for Automotive Assembly

Phinit Udomsri, Oranuch Boonphong, Songyot Thampanya; Thailand
Research Area: Mechanical and Industrial Engineering

Integrated Steering Method for Mitigating Performance Degradation in Six-Wheel Robot Caused by Obstacle Traversing

Saleh Kasiri Bidhendi, Shiva Tashakori; Iran
Research Area: Mechanical and Industrial Engineering

Sustainability in Medical Innovation: A Focus on Eco-Friendly Medical Devices

Arben Berisha, Aida Krasniqi; Kosovo
Research Area: Economics and Management Engineering

Innovation Management in E-Health Care: The Implementation of New Technologies for Health Care in Europe and the USA

Dariusz M. Trzmielak, William Bradley Zehner, Elin Oftedal, Ilona Lipka-Matusiak; Poland
Research Area: Economics and Management Engineering

Next-Generation Biosensors for Real-Time Health Data Management in Digital Medicine

Alice Botnari; Germany
Research Area: Economics and Management Engineering

Emerging Trends in Robotics-Driven Innovation for Healthcare Supply Chain Management

Rutuja Joshi, Vishal Tiwari; India
Research Area: Economics and Management Engineering

Investment Behavior of Islamic Bank Clients Using Behavioral Finance

Dean Vergara; Malaysia
Research Area: Economics and Management Engineering

Assessment of Takaful (Islamic Insurance) Models in Emerging Economies

Freddie Hart, Laura Kinsley; United Kingdom
Research Area: Economics and Management Engineering

Integrating Islamic Finance Principles with Environmental, Social, and Governance Criteria: A Bibliometric Analysis of Global Trends and Impact Within the 2030 Agenda

Paolo Biancone, Silvana Secinaro, Davide Calandra; Italy
Research Area: Economics and Management Engineering

Risk Management Techniques in Islamic Mutual Funds

Salina Jamil, Amirul Hakim, Haniza Latif; Malaysia
Research Area: Economics and Management Engineering

Impact of Fintech Innovations on Sharia-Compliant Investment Strategies

Cecilia Orozco, Lucas Franco, Mariana Campos; Mexico
Research Area: Economics and Management Engineering

The Influence of Religiosity on Ethical Decision-Making in Modern Societies

Divya Malhotra, Ajay Parekh, Sonal Kadam; India
Research Area: Humanities and Social Sciences

Interfaith Initiatives Supported by Digital Communication Tools

Khalid Al-Ghamdi, Abdullah Al-Juhani; Sweden
Research Area: Humanities and Social Sciences

Parochial View of Religion: A Major Hindrance to Peaceful Coexistence in Nigerian Society

Abdulazeez Balogun Shittu; Nigeria
Research Area: Humanities and Social Sciences

The Use of Social Media in Promoting Religious Tolerance and Peace

Cristian Andrei, Daniela Lazar, Valentin Popa, Mirela Gheorghiu; Romania
Research Area: Humanities and Social Sciences

The Role of Religious Education in Reducing Societal Conflicts

Wilawan Kumchai, Worawit Wasana, Benchamas Raksa; Thailand
Research Area: Humanities and Social Sciences

Towards a Methodology of TafsīR MaqāṣIdī: A Quest for Realizing Justice in the Qur’Anic Exegesis

Muhammad Abdul Aziz; Indonesia
Research Area: Humanities and Social Sciences

Assess the Knowledge and Practice of Primary Care Physicians in Approaching Mental Health among PHC

Hana Khateam Alonazy, Mohammed Moslah Alsodan, Abdulaziz Abdullah Ali Alqahtani, Hussain Ali N. Almaklas, Salah Mahmoud Al-Abbasi, Abdullah Ali Abdullah Alqahtani, Maram Mubarak Barkoot, Arwa Abdullah Suliman Aseeri; Saudi Arabia
Research Area: Psychological and Behavioral Sciences

Liability in Negligence Claims Arising from Autonomous Trading Systems

Fatima Ibrahim, Amina Abdel-Rahman; Finland
Research Area: Law and Political Sciences

Impact of Smart Contracts on Reducing Unfair Competition in Trade

Momo Matsuda, Tatsuya Hara; Belgium
Research Area: Law and Political Sciences

Advanced Algorithms in Detecting and Preventing Competitive Wrongdoing

Isabella Freeman, Henry Wilkinson; United States
Research Area: Law and Political Sciences

Analyzing Competitive Harm in E-Commerce Through Data Analytics

Amporn Chompoo, Noppharat Sunthon, Pracha Somsak, Nattida Phongchai, Suwit Phasuk; Thailand
Research Area: Law and Political Sciences

Spatial Analysis of Informal Economies in Urban Settings

Nazmi Musliu, Orhidea Thaçi, Petrit Berisha; Kosovo
Research Area: Economics and Management Engineering

Sustainability Effect of Informality and Globalisation: Capturing Spatial Spillovers and Threshold Effects in African and European Economies

Segun Thompson Bolarinwa, Munacinga Simatele, Adedamola Victoria Adegbuyi; South Africa
Research Area: Economics and Management Engineering

Dynamic Models of Global Supply Chain Resilience

Ignacio Castro, Milagros Cabrera, Diego Vega; Brazil
Research Area: Economics and Management Engineering

Dynamic Financial Strategies for Sustainable Business Growth

Tamara Davis; Hungary
Research Area: Economics and Management Engineering

Impact of Digital Payment Systems on Informal Market Sustainability

Sulaiman Al-Anazi; Saudi Arabia
Research Area: Economics and Management Engineering

The Effect of Artificial Intelligence on Digital Marketing

Magdi Kamil Shafik Zekry; Egypt
Research Area: Economics and Management Engineering

The Effect of Artificial Intelligence on Finance, Banking and Insurance

Sherine Shahat Abdelnour Bastourous; Egypt
Research Area: Economics and Management Engineering

The Impact of Artificial Intelligence on Finance and Banking

Fady Adel Ramzy Gars; Egypt
Research Area: Economics and Management Engineering

The Miseducation of Color: Examining Racialized Experiences of Students of Color at Predominantly White Institutions (PWIs)

Sonia Darshini Singh; United States
Research Area: Educational and Pedagogical Sciences

Developing Inclusive Curriculum for Diverse Higher Education Populations

Lexi Austin, Hugo Spencer; Canada
Research Area: Educational and Pedagogical Sciences

Implementing Universal Design for Learning in Higher Education

Nicolae Sturza, Mihail Lungu, Toms Feldmans; Latvia
Research Area: Educational and Pedagogical Sciences

Affirmative Action and Its Effectiveness in Higher Education Admissions

Klemen Cvetko, Nika Gantar; Slovenia
Research Area: Educational and Pedagogical Sciences

Innovative Pedagogical Approaches to Promote Critical Thinking and Problem-Solving Skills

Hugo Baudoin; Luxembourg
Research Area: Educational and Pedagogical Sciences

Promoting Student Identity Development through Game-Based Learning Platforms

Brian Hogan, Aoibheann Maher, Cormac Casey; Australia
Research Area: Educational and Pedagogical Sciences

Transforming Pedagogical Practices Through Digital Inclusion for Marginalized Learners

Tomas Ortiz, Lucia Miranda; Colombia
Research Area: Educational and Pedagogical Sciences

Diversity-Centric Curriculum Design in Multicultural Classrooms Using Emerging EdTech

Sara Al-Ahmadi; Norway
Research Area: Educational and Pedagogical Sciences

Identity Formation of South Asian English Language Teaching in Japan

Deepak Regmi; Japan
Research Area: Educational and Pedagogical Sciences

Language and Empire: A Post-Colonial Examination of Othering and Identity in Babel: An Arcane History

Essam Hegazy; Egypt
Research Area: Humanities and Social Sciences

Digital Tools in Overcoming Linguistic Barriers in Translation

Kazuya Takeuchi, Chihiro Shibata; Croatia
Research Area: Humanities and Social Sciences

Identity Formation Through Multilingual Translation in Globalized Societies

Hannah Roth; Switzerland
Research Area: Humanities and Social Sciences

Translation and the Construction of Otherness in Post-Colonial Texts

Fahad Al-Dibyan, Muna Al-Saleh; United Arab Emirates
Research Area: Humanities and Social Sciences

Impact of Colonialism on Language Identity and Translation Practices

Gonzalo Valdez; Mexico
Research Area: Humanities and Social Sciences

Protection and Education of Consumer Interest through Competition Laws: A Comparative Appraisal

Gurbinder Kaur; India
Research Area: Law and Political Sciences

Assessment of Visitor Satisfaction in Eco-Friendly Accommodations

Jan Ege; Cyprus
Research Area: Social and Business Sciences

Economic Benefits of Sustainable Tourism Enterprises in Cultural Heritage Areas

Adam Bell, Ella Burton, Nathan Russell; New Zealand
Research Area: Social and Business Sciences

Impact of Eco-Lodges on Local Community Development and Heritage Preservation

Giorgio Venturi, Claudia Fiorentino; Italy
Research Area: Social and Business Sciences

Residents Awareness and Willingness to Offer Homestay Accommodation to Tourists at a Listed World Heritage Site: Idanre Hills, Ondo State, Nigeria

Arowosafe Folusade Catherine, Arowosafe Olubunmi, Aina Samson; Nigeria
Research Area: Social and Business Sciences

Advanced Data Analysis Techniques for Ecotourism Development

Alexandra Yiallourou, Loukas Gregoriou, Thalia Theodorou, Christos Panayiotou; Cyprus
Research Area: Social and Business Sciences

Redesigning Occupational Health Protocols with Biometric Data Integration in High-Stress Work Settings

Tsubasa Harada; Norway
Research Area: Social and Business Sciences

Impact of Psychological Flexibility on Employee Resilience During Rapid Organizational Transformations

Cliodhna Brennan, Tomas Reilly; Spain
Research Area: Social and Business Sciences

The Influence of Psychological Safety Networks on Team Performance in Technologically Advanced Workspaces

Orla McCarthy; Germany
Research Area: Social and Business Sciences

Daily Stand-up Meetings - Relationships with Psychological Safety and Well-being in Teams

Sarah Rietze, Hannes Zacher; Germany
Research Area: Social and Business Sciences

Workplace Wellbeing Innovations Driven by Predictive Analytics in Fast-Paced Corporate Environments

Tine Bro, Emil Vang; Denmark
Research Area: Social and Business Sciences

New Ergonomic Interfaces for Enhancing Employee Adaptability in Dynamic Industrial Sectors

Thekla Kallis; Croatia
Research Area: Social and Business Sciences

Agile Succession Planning in the Post-Covid World

Ashneel Kumar Singh; Fiji
Research Area: Economics and Management Engineering

Strategic Termination Planning in High-Performance Organizations

Ilaria Bellini, Karen Bennett; Italy
Research Area: Economics and Management Engineering

Predictive Analytics in Strategic Workforce Planning

Yvonne Maas, Joost Molenaar; Netherlands
Research Area: Economics and Management Engineering

Approaches to Improving Employee Engagement Using Digital Tools

Maria Ratajczak, Rafał Nowakowski, Magdalena Kubicka; Poland
Research Area: Economics and Management Engineering

Strategies for Effective Talent Acquisition and Retention

Lilit Vardanyan, Gevorg Kirakosyan, Astghik Hovhannisyan, Narek Hakobyan; Armenia
Research Area: Economics and Management Engineering

Entrepreneurial Leadership and its Impact on University-Industry Partnerships

Eloise Foster, Jacob Harvey; United Kingdom
Research Area: Educational and Pedagogical Sciences

Role of Technology Incubators in Enhancing University-Based Entrepreneurship

Maya Graham, Oscar Ford; Australia
Research Area: Educational and Pedagogical Sciences

Influence of Cross-Disciplinary Collaboration on Innovation in Higher Education

Robin Kleven; Norway
Research Area: Educational and Pedagogical Sciences

Leadership and Entrepreneurship in Higher Education: Fostering Innovation and Sustainability

Naziema Begum Jappie; South Africa
Research Area: Educational and Pedagogical Sciences

Fostering Entrepreneurial Mindsets in Higher Education through Innovation Hubs

Lassi Koskinen, Olli Salonen; Finland
Research Area: Educational and Pedagogical Sciences

Effective Use of Online Platforms for Entrepreneurship Education

Tommaso Russo; Italy
Research Area: Educational and Pedagogical Sciences

Managerial Resilience in Banking and Financial Sector: A Spiritual Framework

Santosh Kumar Sharma; India
Research Area: Humanities and Social Sciences

Integrating Spirituality into Managerial Practices for Enhanced Resilience in Banking

Martin Albrecht, Laura Felten; France
Research Area: Humanities and Social Sciences

Innovative Approaches to Stress Management for Financial Managers

Mei Takahashi, Koki Shimizu; United Kingdom
Research Area: Humanities and Social Sciences

Philosophical Approaches to Ethical Banking Practices in the Digital Age

Amelia Shaw; United Kingdom
Research Area: Humanities and Social Sciences

Developing Resilient Banking Models for Economic Uncertainty

Trupti Pandit, Akash Rane; India
Research Area: Humanities and Social Sciences

The Effect of Inclination on the Perceptual Usability of Washing Machine Interfaces

Michele Sinico; Italy
Research Area: Industrial and Systems Engineering

Signs of the Season: A Semiotic Study of the Filipino Christmas Depicted in Disney’s Advertisement ‘From Our Family to Yours’

Kate Catherine D. Belotindos, Micah Marie F. Indab, Angelia B. Lacuna, Dafnie S. Solo, Kreshianne T. Rosales; Philippines
Research Area: Humanities and Social Sciences

Myths of Wealth and Destruction: A Semiotic Analysis of Domestic Spaces in ‘Oro, Plata, Mata’, a Film by Peque Gallaga

Reche Lou M. Cadotdot, Niña Amor C. Pontoy, Janna Marie A. Raupan, Princess Aubrey D. Tiangco; Philippines
Research Area: Humanities and Social Sciences

Decoding Digital Culture: A Semiotic Analysis of Social Media Representation in ‘The Social Network'

Nathan Junell S. Arjona, Al-Noor O. Guinal, Marc Leugin V. Logronio, Jean Clark L. Naga; Philippines
Research Area: Humanities and Social Sciences

Strategic Green Marketing and Its Impact on Business Performance in Eco-Friendly Product Segments

Adriana Stefan, Rares Zaharia, Claudia Ilie; Romania
Research Area: Economics and Management Engineering

Examining the Role of Green Marketing in Enhancing Corporate Social Responsibility and Brand Image in the Consumer Goods Industry

Valentina Molina, Juan Herrera; Argentina
Research Area: Economics and Management Engineering

Impact of Green Marketing Mix Strategy and CSR on Organizational Performance: An Empirical Study of Manufacturing Sector of Pakistan

Syeda Shawana Mahasan, Muhammad Farooq Akhtar; Pakistan
Research Area: Economics and Management Engineering

Innovations in Eco-Friendly Packaging and Their Contribution to Green Marketing Strategies

Andrea Gallo; United Arab Emirates
Research Area: Economics and Management Engineering

Cross-Cultural Consumer Behavior: A Comparative Study

Hani Al-Harthi; Qatar
Research Area: Economics and Management Engineering

Adopting Cyber-Physical Systems for Quality Improvement in Manufacturing

Davide Costa, Valentina Moretti; Slovenia
Research Area: Industrial and Systems Engineering

Mixed-ownership Reform and Quality of Internal Control of State-owned Enterprises: Logic and Evidence

Mao Ju; China
Research Area: Industrial and Systems Engineering

Revolutionizing Product Quality with Real-Time Data Analytics

Dong Yi; Taiwan
Research Area: Industrial and Systems Engineering

Blockchain-Based Ownership Models for Transparent Enterprise Management

Olivera Pavicevic, Lazar Vuckovic, Biljana Niksic, Radovan Filipovic; Serbia
Research Area: Industrial and Systems Engineering

Digital Transformation and the Future of Enterprise Management

Vikas Patil, Nandita Bhave, Sunil Rao; India
Research Area: Industrial and Systems Engineering

The Impact of Innovations in Human Resource Practices, Innovation Capabilities and Competitive Advantage on Company Performance

Bita Kharazi; Iran
Research Area: Humanities and Social Sciences

Predicting Destination Station Based on Public Transit Passenger Profiling

Xuyang Song, Jun Yin; China
Research Area: Transport and Vehicle Engineering

Smart Ticketing Systems and Their Impact on Travel Behavior in Urban Transit

Tarek Kamal, Omar Hassan; France
Research Area: Transport and Vehicle Engineering

Impact of Autonomous Vehicles on Destination Prediction Accuracy in Urban Areas

Ryo Honda; Sweden
Research Area: Transport and Vehicle Engineering

Innovative Approaches to Passenger Profiling in Modern Public Transit Systems

Emilia Romero, Santiago Martinez; Germany
Research Area: Transport and Vehicle Engineering

Real-Time Crowdsourcing Platforms for Improving Public Transit Efficiency

R. Permata; Ireland
Research Area: Transport and Vehicle Engineering

Designing Smart Transit Hubs for Efficient Passenger Profiling and Destination Management

Ayesha Lobo, Aditya Raut, Varsha Singh; India
Research Area: Transport and Vehicle Engineering

The Main Characteristics of Destructive Motivation

Elen Gasparyan, Naira Hakobyan; France
Research Area: Computer and Information Engineering

Damage Mitigation in E-administration Through Advanced Encryption Techniques

Emilia Varela, Santiago Acosta; Colombia
Research Area: Computer and Information Engineering

Damage Control Strategies in E-commerce Following Digital Attacks

Takuya Endo; Germany
Research Area: Computer and Information Engineering

Organizational Adaptation to Rapid Changes in E-education Technologies

Federico Flores, Rocio Ponce, Paula Benitez; Brazil
Research Area: Computer and Information Engineering

The Impact of Cybersecurity Breaches on E-commerce Consumer Behavior

Zhang Yuqing, Wang Jiahao, Liu Shuying; China
Research Area: Computer and Information Engineering

Motivational Factors Influencing Adoption of E-administration Systems

Francesco Barone; Portugal
Research Area: Computer and Information Engineering

An Integrated Power Generation System Design Developed between Solar Energy-Assisted Dual Absorption Cycles

Asli Tiktas, Huseyin Gunerhan, Arif Hepbasli; Türkiye
Research Area: Energy and Power Engineering

Development of High-Performance Absorption Heat Pump Cycles Using New Refrigerants

Shota Kondo, Riko Okamoto; Switzerland
Research Area: Energy and Power Engineering

Hybrid Solar-Thermal Systems in Enhancing Multigeneration Energy Production

Elliot Payne, Abigail Rivers; United Kingdom
Research Area: Energy and Power Engineering

Integrating Solar Absorption Cycles with Geothermal Energy for Improved Generation Efficiency

Gabriel Nunez, Antonella Ortega, Franco Mendoza, Julieta Suarez; Chile
Research Area: Energy and Power Engineering

Performance Optimization of Solar-Powered Absorption Refrigeration Systems

Juan Perez, Daniel Culpo; Poland
Research Area: Energy and Power Engineering

PROGRAM LAST UPDATED: December, 18 2024 14:57

PROGRAM GUIDELINES

1.GUIDE FOR ORAL AND e-POSTER PRESENTATIONS

We kindly ask ORAL presenters to prepare electronic presentations of 15 minutes (allowing 5 minutes for discussions) and e-POSTER presenters to prepare short electronic presentations of 5 minutes (allowing 5 minutes for discussions) (NO PRINT OUTS). A Linux-based operating system is used for both Oral and e-Poster presentations. All presenters should make a PDF file version of their presentation and upload it to the system.

2. ROLE OF THE SESSION CHAIR

The duties of the Session Chair include the following:

1. Arrive at the conference hall at least 10 minutes before the session begins. Identify the paper presenters and discussant(s) in advance, and introduce yourself. Remind each presenter of the time limits that apply, and describe the method you will use to alert them of time limits during the actual presentation.
2. At the start of the session, introduce yourself to the audience, announce the session/title, and offer a brief overview indicating how the papers are related.
3. Prior to each presentation, introduce the speaker, announce the paper’s title, the name(s) of the author(s), and provide brief comments regarding the affiliation and/or background of each presenter. Identify the individual who will be speaking if it is someone other than the first author.
4. During the presentations enforce time limits strictly so that no author (or audience member) monopolizes someone else’s time. Oral paper presentations each have 20 minutes (15 minutes for full presentation papers, 5 minutes for discussions), and 10 minutes for e-Poster (electronic poster) presentations (5 minutes for poster presentation, 5 minutes for discussions).
5. Once presentations are complete (oral paper presentations and e-Poster presentations), the remaining time can be used for informal discussion between the audience and session participants. It is your job to field questions from the audience.
6. Try to conduct the session as informally as possible (e.g., use first names when addressing participants and members of the audience) to encourage as much audience participation as possible.

3. BEST PAPER AWARDS / BEST PRESENTATION AWARDS

A 'Best Paper Award / Best Presentation Award' will be conferred on the author(s) of an abstract or a full paper presented at the conference. Selection is made based on the best combined marks of the abstract / paper review and presentation quality appraisal conducted by the Session Chair at the conference venue, and assessed by the Program Committee. Award winners will be announced after the conference. The author(s) of a selected paper/presentation will receive a signed and stamped official Best Paper Award / Best Presentation Award e-certificate.