Tokyo, July 22-23, 2021 Conference Program

Scholarly Integrity Remarks:

1)Authors must be ready in the meeting room at least 10 minutes prior to the start of the session. Presenters must introduce themselves to the session chair(s) and upload their Oral and ePoster presentations to the computer.

2)Authors must be able to present on any day of the conference – the program cannot be tailored around specific requests from individual authors to present on particular days.

3)The international research conference program is designed for original research contributions and presentations in all research fields. Presentations scheduled in the Oral and ePoster sessions are drawn from a selection of the peer reviewed papers from a wide range of scientific and other disciplines of inquiry.

JULY 22-23, 2021: DIGITAL PROGRAM

DAY 1: VIRTUAL MEETING
The digital presentation session will start at 12 p.m. (midday) on July 22, 2021 London local time. The link to join the virtual conference will be available for registered delegates 10 minutes before the session at https://waset.org/profile/messages.

DAY 2: PERTINENT READING
Digital program consists of an e-book of relevant studies to download for future reading on July 23, 2021.

Digital Program consists of the e-proceedings book which is available online-only and includes the conference communications (proceedings abstracts and papers). Registered participants can access the digitally available conference proceedings ( and certificates ) by visiting their profile pages.

MEDICAL AND HEALTH SCIENCES RESEARCH

Chair: Andrew Stranieri

The Design of a Smartbrush Oral Health Installation for Aged Care Centres in Australia

Lukasz Grzegorz Broda, Taiwo Oseni, Andrew Stranieri, Rodrigo Marino, Ronelle Welton, Mark Yates; Australia
Research Area: Bioengineering and Life Sciences

Biomarkers in a Post-Stroke Population: Allied to Health Care in Brazil

Michael Ricardo Lang, AdriéLle Costa, Ivana Iesbik, Karine Haag, Leonardo Trindade Buffara, Oscar Reimann Junior, Chelin Auswaldt Steclan; Brazil
Research Area: Medical and Health Sciences

Liraglutide Augments Extra Body Weight Loss after Sleeve Gastrectomy without Change in Intrahepatic and Intra-Pancreatic Fat in Obese Individuals: Randomized, Controlled Study

Ashu Rastogi, Uttam Thakur, Jimmy Pathak, Rajesh Gupta, Anil Bhansali; India
Research Area: Mathematical and Computational Sciences

Influence of Glenohumeral Joint Approximation Technique on the Cardiovascular System in the Acute Phase after Stroke

Iva Hereitova, Miroslav Svatek, Vit Novacek; Czechia
Research Area: Medical and Health Sciences

The Ethical Triage Dilemma: Is the Question Who Care First?

Alessandro Ferrara; Italy
Research Area: Medical and Health Sciences

Multilevel of Factors Affected Optimal Adherence to Antiretroviral Therapy and Viral Suppression amongst HIV-Infected Prisoners in South Ethiopia: A Prospective Cohort Study

Terefe Fuge, George Tsourtos , Emma Miller; Australia
Research Area: Medical and Health Sciences

“Smart Click” Build up a Tailor-Made Mobile App to Meet the Exact Needs for Cns.

CY Lau, CW Lo, KY Lee, MC Fung; Hong Kong
Research Area: Nursing and Health Sciences

Improving the Competency of Undergraduate Nursing Students in Addressing a Timely Public Health Issue

Tsu-Yin Wu, Jenni Hoffman, Lydia McMurrows, Sarah Lally; United States
Research Area: Nursing and Health Sciences

Covid-19 Impact on Global Sports Ecosystem

Sujay Bisht; India
Research Area: Sport and Health Sciences

The Transcriptome of Carnation (Dianthus Caryophyllus) of Elicited Cells with Fusarium Oxysporum f.sp. Dianthi

Juan Jose Filgueira, Daniela Londono-Serna, Liliana Maria Hoyos; Colombia
Research Area: Bioengineering and Life Sciences

Chair: Katherine France

Economic Evaluation of Drugs for Cardiovascular Diseases

Marziye Hadian, Alireza Jabbari, Abdosaleh Jafari; Iran
Research Area: Biomedical and Biological Engineering

Economic Evaluation of Drugs Used in Myocardial Infarction

Aziz Rezapour, Abdosaleh Jafari, Marziye Hadian; Iran
Research Area: Biomedical and Biological Engineering

Five Years of Robotic Surgery in a Colorectal Service at James Cook University Hospital: a Review of Histology, Resection Margins and Patient Outcomes

Katherine France, Mohammad Aradaib, Trisha Jha, Madan Jha; United Kingdom
Research Area: Medical and Health Sciences

Evaluation to Assess the Impact of Newcastle Infant Partnership Approach

Samantha Burns, Melissa Brown, Judith Rankin; United Kingdom
Research Area: Medical and Health Sciences

The Associations between Ankle and Brachial Systolic Blood Pressures with Obesity Parameters

Matei Tudor Berceanu, Hema Viswambharan, Kirti Kain, Chew Weng Cheng; United Kingdom
Research Area: Medical and Health Sciences

Diffuse Large B-Cell Lymphoma of The Anterior Abdominal Wall: A Case Report

Zhi K. Sia, Matthew D. Beck; Australia
Research Area: Medical and Health Sciences

Health-Seeking Behaviour of Ethiopian Caregivers when Infants Are Unwell—A Descriptive Qualitative Study

Girmay Kiross, Catherine Chojenta, Deborah Loxton, Daniel Barker; Australia
Research Area: Medical and Health Sciences

Expression of BMP8A and SMAD1/3/5 Proteins in Methotrexate-Induced Infertility in Swiss Albino Mice

Olajumoke Omolara Ojo, Oluwadamilare O. Ajayi, Babafemi Tosin Ogunbiyi; Nigeria
Research Area: Bioengineering and Life Sciences

Simulating the Hot Hand Phenomenon in Basketball with Bayesian Hidden Markov Models

Gabriel Calvo, Carmen Armero, Luigi Spezia; Spain
Research Area: Mathematical and Computational Sciences

Research Design for Developing and Validating Ice-Hockey Team Diagnostics Scale

Gergely Geczi; Hungary
Research Area: Economics and Management Engineering

Identification of Candidate Congenital Heart Defects Biomarkers by Applying a Random Forest Approach on DNA Methylation Data

Kan Yu, Khui Hung Lee, Eben Afrifa-Yamoah, Jing Guo, Katrina Harrison, Jack Goldblatt, Nicholas Pachter, Jitian Xiao, Guicheng Brad Zhang; Australia
Research Area: Medical and Health Sciences

Systematic Review of Stricturoplasty for Ileal Strictures in Crohn’s Disease in the Biologics Times

Mohammed Qayum, Lava Krishna Kannappa, Shahin Hajibandeh, Arun Chockalingam; United Kingdom
Research Area: Medical and Health Sciences

Non-Conveyance Statuses Resulting from Patients-Initiated Refusal for Emergency Medical Services in Riyadh Province, Saudi Arabia.

H. N. Moafa; Netherlands
Research Area: Health and Medical Engineering

Health Hazards of Performance Enhancing Drugs

Austin Oduor Otieno; Kenya
Research Area: Sport and Health Sciences

Exploring Potential for Community Pharmacists to Support Improved Help-Seeking for Dementia among Black, Asian and Minority Ethnic Population

Omaedo Iyoko; United Kingdom
Research Area: Medical and Health Sciences

Chair: Amy Atkinson

The Determinants of Enterprise Risk Management: Literature Review, and Future Research

Sylvester S. Horvey, Jones Mensah; South Africa
Research Area: Economics and Management Engineering

The Inequality Effects of Natural Disasters: Evidence from Thailand

Annop Jaewisorn; Thailand
Research Area: Mathematical and Computational Sciences

Analyzing the Use of Literary Symbols as Decoders of Reality in Science Fiction Television Series

Marlene Navarro; Mexico
Research Area: Humanities and Social Sciences

The Academic Importance of the Arts in Fostering Belonging

Ana Handel, Jamal Ellerbe, Sarah Kanzaki, Natalie White, Nathan Ousey, Sean Gallagher; United States
Research Area: Educational and Pedagogical Sciences

Exploring Art Teacher Voice: Canadian Education - Local and International Perspectives

Amy Atkinson; Canada
Research Area: Humanities and Social Sciences

Project Based Online Learning of Practical Engineering Course during COVID-19: A Case Study Analysis of MEP Electrical Systems Design Using Revit

Osama Yaseen M. Al-Rawi, Hadeel Alkurdi, Ammarah Saddiq; Bahrain
Research Area: Educational and Pedagogical Sciences

Application of Deep Neural Networks to Assess Corporate Credit Rating

Parisa Golbayani, Dan Wang, Ionut¸ Florescu; United States
Research Area: Mathematical and Computational Sciences

Chair: Merav Solomon

The Reinvention of History in XVIII Century: Aims and References in the Monuments of Mantua Renovated by Paolo Pozzo

Ginevra Rossi; Italy
Research Area: Architectural and Environmental Engineering

The Virtue of Local Community in the 21st Century: Contribution of Communal Factors to Community Resilience and Communality Scale

Merav Solomon Even-Chen; Israel
Research Area: Humanities and Social Sciences

Exploring the Carer Gender Support Gap: Results from Freedom of Information Requests to Adult Social Services in England

Stephen Bahooshy; United Kingdom
Research Area: Humanities and Social Sciences

Educational Management during COVID-19 Pandemic: A Case Study in Turkey

Burcu Akaydin, Ece Ozturk; Türkiye
Research Area: Educational and Pedagogical Sciences

Effective Adaptation of Open Educational Resources for Math and Statistics Instruction

Larry Musolino; United States
Research Area: Educational and Pedagogical Sciences

The Effect of Metacognitive Think-Aloud Strategy on Form 1 Pupils’ Reading Comprehension Skills via DELIMa Platform

Fatin Khairani Khairul 'Azam; Malaysia
Research Area: Educational and Pedagogical Sciences

Rural Education in Saudi Arabia: School Leaders’ and Teachers’ Experiences and Perceptions

Emad Alotaibi; United Kingdom
Research Area: Educational and Pedagogical Sciences

The Perception of College Experience for Students with Adhd

Maricla Pirozzi; United States
Research Area: Medical and Health Sciences

Memes as Propaganda: An Examination of Incels Use of Memes

Katherine Reid; Canada
Research Area: Law and Political Sciences

Student Participation in Higher Education Quality Assurance Processes

Tomasz Zarebski; Poland
Research Area: Law and Political Sciences

Logging On: How the Internet's Personalization Algorithms Facilitate Radicalization to Extremism

Stephanie R. Speranza; United States
Research Area: Humanities and Social Sciences

Determinants of the Performance of Window Takaful Companies: A Study of Pakistan

Hafiz Rauf Iqbal, Muhammad Asghar Shahzad, Syed Kashif Saeed, Muhammad Akmal; Pakistan
Research Area: Economics and Management Engineering

Jalal-Ale-Ahmad and ‘Critical Consciousness’: A Comparative Study

Zohreh Ramin; Iran
Research Area: Humanities and Social Sciences

Chair: Amany Bassyouny

Access to Reproductive Health Care for Internally Displaced Women in Northern Nigeria: A Critical Ethnography Study

Oluwakemi Amodu, Bukola Salami, Solina Richter, Philomina Okeke-Ihejirika; Canada
Research Area: Law and Political Sciences

Disparities and Prevailing Situation of Afghan Refugee in Pakistan: A Research Assessment Study with Focus On Baluchistan Province

Bashir Ahmed; Pakistan
Research Area: Law and Political Sciences

Skills Mismatch of Displaced Professionals in Canada

Camelia Tigau; Mexico
Research Area: Law and Political Sciences

Transferring Stress Patterns

Kathrin Feindt; Germany
Research Area: Cognitive and Language Sciences

Mnemotopic Perspectives: Communication Design as Stabilizer for the Memory of Places

C. Galasso; Italy
Research Area: Cognitive and Language Sciences

The Role of Instruction in Knowledge Construction in Online Learning

Soo Hyung Kim; United States
Research Area: Educational and Pedagogical Sciences

Holocaust Fairy Tale

Kinga Anna Gajda; Poland
Research Area: Cognitive and Language Sciences

Effectiveness of Habit Reversal Treatment(Hrt) on Craving,Assertiveness and Emotion Regulation of Addicts Treated with Methadone

Samin Khorrami; Iran
Research Area: Cognitive and Language Sciences

Changing Dimensions of Peace and Security in International Relations: Implication on Middle East

Priya Ranjan Kumar; India
Research Area: Humanities and Social Sciences

Paying Less and Getting More: Evidence on the Effect of Corporate Purpose from Two Natural Field Experiments

Nikolai Brosch, Alwine Mohnen; Germany
Research Area: Economics and Management Engineering

How Afghan Female Refugees in Germany Navigate Reproductive Health: A Photovoice Project through Coronavirus Pandemic

Naseem S. Tayebi; Germany
Research Area: Law and Political Sciences

How Schools Can Support a Sense of Belonging in Female Students from Refugee Backgrounds

Van der Putten, Sonja A.; Canada
Research Area: Law and Political Sciences

Predictive Behavioral Modeling of Global Asylum Adjudications-United States versus European Union

Hari Krishnamurthy; United States
Research Area: Law and Political Sciences

Identifying the Effects of the COVID-19 Pandemic on Syrian and Congolese Refugees’ Health and Economic Access in Central Pennsylvania

Mariam Shalaby, Kayla Krause, Raisha Ismail, Daniel George; United States
Research Area: Law and Political Sciences

The Role of Social Media in Changing the Attitudes of Upper Egyptian Females towards Early Marriage

Amany Bassyouny; Egypt
Research Area: Social and Business Sciences

Economic Implications of the Arrival of Syrian Refugees in Jordan

Ammar Z. Alwrekiat, Sara Ojeda Gonzalez, Maria Jose Miranda Martel, Antonio Mihi-Ramirez; Spain
Research Area: Law and Political Sciences

Economic Empowerment before Political Participation: Peacebuilding from the Perspective of Women Activists in the Post-Yugoslav Area

Emilie Fort; United Kingdom
Research Area: Humanities and Social Sciences

Understanding Embryology in Promoting Peace Leadership: A Document Review

Vasudev Das; United States
Research Area: Humanities and Social Sciences

English Test Success among Syrian Refugee Girls Attending Language Courses in Lebanon

Nina Leila Mussa; United States
Research Area: Humanities and Social Sciences

Theorizing Women’s Informal Peacebuilding and Their Strategies

Nandini Gupta; Ireland
Research Area: Humanities and Social Sciences

Manifestations of Moral Imagination during the COVID-19 Pandemic in the Debates of Lithuanian Parliament

Laima Zakaraite, Vaidas Morkevicius; Lithuania
Research Area: Law and Political Sciences

The Role of Businesses in Peacebuilding in Nigeria: A Stakeholder Approach

Jamila Mohammed Makarfi, Yontem Sonmez; United Kingdom
Research Area: Humanities and Social Sciences

Vietnam’s International Trade Is Showing Signs of Recovery after the COVID-19 Pandemic

Nguyen Thi Thu Hoan; Vietnam
Research Area: Social and Business Sciences

The Use of Ward Linkage in Cluster Integration with a Path Analysis Approach

Adji Achmad Rinaldo Fernandes; Indonesia
Research Area: Economics and Management Engineering

Closing the Assessment Loop: Case Study in Improving Outcomes for Online College Students during Pandemic

Arlene Caney, Linda Fellag; United States
Research Area: Humanities and Social Sciences

Chair: Megan Omahony

Optimize Food Safety Monitoring Scheme in Agricultural Products Using Bayesian Network and Integer Programming: Dioxin Monitoring as Example

Zhengcong Wang; Netherlands
Research Area: Economics and Management Engineering

Logistics Support as a Key Success Factor in Gastronomy

Hanna Zietara; Poland
Research Area: Nutrition and Food Engineering

Development and Implementation of An "Electric Island" Monitoring Infrastructure for Promoting Energy Efficiency in Schools

Vladislav Grigorovitch, Marina Grigorovitch, David Pearlmutter, Erez Gal; Israel
Research Area: Civil and Environmental Engineering

In Situ Extraction of Medium Chain Fatty Acids Using Eco-Friendly Solvent From Fermentation Broth

Lamia Saadoun, Alessio Campitelli, Jan Kannengiesser, Daniel Stanojkovski, Laila Mandi, Naaila Ouazzani; Morocco
Research Area: Environmental and Ecological Engineering

The Promotion of Andalusian Heritage through Tourism in the Medina of Marrakech

Nour Eddine Nachouane, Aicha Knidiri; Morocco
Research Area: Architectural and Environmental Engineering

Research Developments in Vibration Control of Structure Using Tuned Liquid Column Dampers: A State-of-the-Art Review

Jay Gohel, Anant Parghi; India
Research Area: Mathematical and Computational Sciences

Efficient Use of Natural Resources, Waste Liability and Circular Economy

David Gubeladze, Solomon Pavliashvili; Georgia
Research Area: Physical and Mathematical Sciences

Analysis of the Design Process: Case Study of Vocal Health Tool Development University of Limerick

Megan OMahony, Louise Kiernan, Eoin White; Ireland
Research Area: Industrial and Manufacturing Engineering

Potential Preventive Measures to Redeem the Steel Industry: A Needful Dilemma of the Developing Countries

Zain Tariq, Rafiq Ahmad, Muhammad Owais; Pakistan
Research Area: Materials and Metallurgical Engineering

Failure of Tubes in the Stainless-Steel Welds of the Heat Exchanger in Which Hot Waste Gases

Iman Hajiannia, Parisa Arbabzadeh; Iran
Research Area: Materials and Metallurgical Engineering

Multi-Objective Electric Vehicle Charge Coordination for Economic Network Management under Uncertainty

Ridoy Das, Myriam Neaimeh, Yue Wang, Ghanim Putrus; United Kingdom
Research Area: Industrial and Systems Engineering

Machine Learning for Music Aesthetic Annotation Using MIDI Format: A Harmony-Based Classification Approach

Lin Yang, Zhian Mi, Jiacheng Xiao, Rong Li; China
Research Area: Computer and Information Engineering

The Potential of Sentiment Analysis to Categorize Social Media Comments Using German Libraries

Felix Boehnisch, Alexander Lutz; Germany
Research Area: Information and Communication Engineering

Parallel Neural Hashes

VarshaPriya J. N., Priyesh Vakharia, Riya Gupta; India
Research Area: Computer and Information Engineering

A Distributed Denial of Service Attack Detection in Internet of Things Using Unsupervised Machine Learning

Hailye Tekleselase; Ethiopia
Research Area: Computer and Information Engineering

An Optimal Hybrid EMS System for a Hyperloop Prototype Vehicle

J. F. Gonzalez-Rojo, Federico Lluesma-Rodriguez, Temoatzin Gonzalez; Spain
Research Area: Transport and Vehicle Engineering

Investigating the Energy Gap and Wavelength of (AlₓGa₁₋ₓAs)ₘ/(GaAs)ₙ Superlattices in Terms of Material Thickness and Al Mole Fraction Using Empirical Tight-Binding Method

Matineh Sadat Hosseini Gheidari, Vahid Reza Yazdanpanah; Iran
Research Area: Mathematical and Computational Sciences

Chair: Veerle Van Hoeck

Xylanase Impact beyond Performance: A Prebiotic Approach in Laying Hens

Veerle Van Hoeck, Ingrid Somers, Dany Morisset; Belgium
Research Area: Animal and Veterinary Sciences

Experimental Investigation of Tip-Speed-Ratio Effects on Wake Dynamics of Horizontal-Axis Wind Turbine

Paul Bayron, Richard Kelso, Rey Chin; Australia
Research Area: Energy and Power Engineering

Identification of Soil and Root Fungi and their Effect on the Growth of Dipterocarpus alatus Roxb. Seedlings

Pemika Khumweera, Suekanya Jarupinthusophon; Thailand
Research Area: Agricultural and Biosystems Engineering

Deep Learning and Accurate Performance Measure Processes for Cyber Attack Detection among Web Logs

Noureddine Mohtaram, Jeremy Patrix, Jerome Verny; France
Research Area: Computer and Information Engineering

Adversary Emulation: Implementation of Automated Countermeasure in CALDERA Framework

Yinan Cao, Francine Herrmann; France
Research Area: Computer and Systems Engineering

Solving a Bi-Objective Unmanned Aerial Vehicle Ground Control Station Location-Allocation Problem

Mumtaz Karatas, Ertan Yakici, Abdullah Dasci; Türkiye
Research Area: Mathematical and Computational Sciences

Computational Determination of the Magneto Electronic Properties of Ce₁₋ₓCuₓO₂ (x=12.5%): Emerging Material for Spintronic Devices

Aicha Bouhlala, Sabah Chettibi; Algeria
Research Area: Physical and Mathematical Sciences

Visual Odometry and Trajectory Reconstruction for UAVs

Sandro Bartolini, Alessandro Mecocci, Alessio Medaglini; Italy
Research Area: Aerospace and Mechanical Engineering

A Novel Negative Electrode from Co(OH)₂ and Graphene for Lithium Batteries

Fatma E. Farghaly, Atef Y. Shenouda; Egypt
Research Area: Mathematical and Computational Sciences

Full Recurrent Neurofuzzy Wavelet/Polynomial Incorporated Feedback Linearization Based Adaptive Control Paradigms for Fuel Cell in a Microgrid: A Comparative Study

Laiq Khan, Muhammad Awais; Pakistan
Research Area: Energy and Power Engineering

Mourning Motivations for Celebrities in Instagram: A Case Study of Mohammadreza Shajarian's Death

Zahra Afshordi; Iran
Research Area: Information and Communication Engineering

Bit Error Rate Monitoring for Automatic Bias Control of Quadrature Amplitude Modulators

Naji Ali Albakay, Abdulrahman Alothaim, Isa Barshushi; United Arab Emirates
Research Area: Electronics and Communication Engineering

Performance Evaluation of a Millimeter-Wave Phased Array Antenna Using Circularly Polarized Elements

Rawad Asfour, Salam Khamas, Edward A. Ball; United Kingdom
Research Area: Electrical and Information Engineering

Durability of Reinforced Concrete Structure on Very High Aggressive Environment: A Case Study

Karla Peitl Miller, Leomar Bravin Porto, Kaitto Correa Fraga, Nataniele Eler Mendes; Brazil
Research Area: Civil and Architectural Engineering

Addressing the Biocide Residue Issue in Museum Collections Already in the Planning Phase: An Investigation Into the Decontamination of Biocide Polluted Museum Collections Using the Temperature and Humidity Controlled Integrated Contamination Manageme

Nikolaus Wilke, Boaz Paz; Belgium
Research Area: Architectural and Environmental Engineering

Instrumentation of Urban Pavements Built with Construction and Demolition Waste

Sofia Figueroa, Efrain Bernal, Silvia Del Pilar Forero, Humberto Ramirez; Colombia
Research Area: Transport and Vehicle Engineering

Exploring an Integrated Pathway for Sustainable Urban Development of Refugee Camp-Cities and Informal Settlements

Mahesh Keswani; Portugal
Research Area: Urban and Civil Engineering

Designing a System in Hygienic Civil Practices for Urban Greening: Methods on Wastewater Management with a Special Emphasis on the Wastewater System of Treatment Centers

Movahed Ahmadvand, Mehraz Andishan Tahkim, Radin Panah Parse; Iran
Research Area: Civil and Environmental Engineering

Chair: Abdelheq Boukarkar

An Approach to Capture, Evaluate and Handle Complexity of Engineering Change Occurrences in New Product Development

Mohammad Rostami Mehr, Seyed Arya Mir Rashed, Arndt Lueder, Magdalena Missler-Behr; Germany
Research Area: Industrial and Systems Engineering

Structuring of Multilayer Aluminum Nickel by Lift-off Process Using Cheap Negative Resist

Muhammad Talal Asghar; Germany
Research Area: Electronics and Communication Engineering

Aeroelastic Robust Optimisation of a Composite Plate Wing Using Surrogate Modelling

Mahshid Sharifi, Jean-Camille Chassaing, Angela Vincenti; France
Research Area: Aerospace and Mechanical Engineering

2-Way Fluid-Structure Interaction of a Wing

Morteza Raki; Canada
Research Area: Aerospace and Mechanical Engineering

Numerical Investigation of a Biomagnetic Fluid in a Stenosed Bifurcated Artery with and without Elastic Behavior

M. Adnan Anwar, Kaleem Iqbal, Mudassar Razzaq; Pakistan
Research Area: Aerospace and Mechanical Engineering

Lifecycle Analysis of Railway Infrastructure in the Face of Vulnerabilities Generated by Climate Change

F. B. Ribeiro, A. F. Rosa, L. C. A. Menezes, M. A. V. Silva; Brazil
Research Area: Transport and Vehicle Engineering

Fast Pattern Mining Inference Applied to Predictive Maintenance of the French High Speed Train Fleet

Amir Dib, Mathilde Mougeot; France
Research Area: Transport and Vehicle Engineering

Generating Links That Are Both Quasi-Alternating and Almost Alternating

Hamid Abchir, Mohammed Sabak2; Morocco
Research Area: Mathematical and Computational Sciences

Strongly Coupled Finite Element Formulation of Electromechanical Systems with Integrated Mesh Morphing Using Radial Basis Functions

David Kriebel, Jan Edgar Mehner; Germany
Research Area: Mechanical and Mechatronics Engineering

Relationship of Fractional Diffusion Equation with SchröDinger Equation and Investigation of Solution with Fractional Mathematics.

Safi Kolkiran; Türkiye
Research Area: Physical and Mathematical Sciences

Vulnerability Analysis for Risk Zones Boundary Definition to Support a Decision Making Process at CBRNE Operations

Aliaksei Patsekha, Michael Hohenberger, Harald Raupenstrauch; Austria
Research Area: Industrial and Systems Engineering

Miniaturized Wideband Single-Feed Shorted-Edge Stacked Patch Antenna for C-Band Applications

Abdelheq Boukarkar, Omar Guermoua; Algeria
Research Area: Electrical and Information Engineering

The Role of Virtual Reality in Mediating the Vulnerability of Distant Suffering: Distance, Agency, and the Hierarchies of Human Life

Z. Xu; Germany
Research Area: Electronics and Communication Engineering

Chair: Yong Ji Song

Experimental and Numerical Determination of the Freeze Point Depression of a Multi-Phase Flow in a Scraped Surface Heat Exchanger

Carlos A. Acosta, Amar Bhalla, Ruyan Guo; United States
Research Area: Chemical and Materials Engineering

Air Impingement Drying of Sargassum muticum: Effects of Temperature on Drying Kinetics

Jeanne Le Loeuff, Virginie Boy, Pascal Morançais, Nathalie Bourgougnon, Jean-Louis Lanoiselle; France
Research Area: Energy and Environmental Engineering

On Chip Magnetic Microparticles Migration for Layer-by-Layer Deposition

Amaury de Hemptinne, Iwona Ziemecka, Wim De Malsche; Belgium
Research Area: Biomedical and Biological Engineering

Numerical Method for Productivity Prediction of Water-Producing Gas Well with Complex 3D Fractures: Case Study of Xujiahe Gas Well in Sichuan Basin

Hong Li, Haiyang Yu, Shiqing Cheng, Nai Cao, Zhiliang Shi; China
Research Area: Chemical and Materials Engineering

High Pressure Multiphase Flow Experiments: The Impact of Pressure on Flow Patterns Using an X-Ray Tomography Visualisation System

Sandy Black, Calum McLaughlin, Alessandro Pranzitelli, Marc Laing; United Kingdom
Research Area: Chemical and Materials Engineering

FEM Investigation of Inhomogeneous Wall Thickness Backward Extrusion for Aerosol Can Manufacturing

Jemal Ebrahim Dessie, Zsolt Lukacs; Hungary
Research Area: Materials and Metallurgical Engineering

Architecture and Convalescence: Biophilic and Neuroscience Approach in Context of Covid-19

Anna Wroblewska; Poland
Research Area: Architectural and Environmental Engineering

Evaluation of Spatial Correlation Length and Karhunen-Loeve Expansion Terms for Predicting Reliability Level of Long-Term Settlement in Soft Soils

Mehrnaz Alibeikloo, Hadi Khabbaz, Behzad Fatahi; Australia
Research Area: Geotechnical and Geological Engineering

Reliability-Based Design of an Earth Slope Taking into Account Unsaturated Soil Properties

A. T. Siacara, A. T. Beck, M. M. Futai; Brazil
Research Area: Geotechnical and Geological Engineering

Finite Difference Based Probabilistic Analysis to Evaluate the Impact of Correlation Length on Long-Term Settlement of Soft Soils

Mehrnaz Alibeikloo, Hadi Khabbaz, Behzad Fatahi; Australia
Research Area: Geotechnical and Geological Engineering

Study of Effects of Hydraulic Retention Time and Organic Loading Rate on the Performance of Two-Stage Semi-Continuous Mesophilic Anaerobic Digestion of Food Waste during System Startup

A. Khadka, A. Parajuli, B. Thapa, S. Dangol, L. Sapkota, A. Ghimire; Nepal
Research Area: Biotechnology and Bioengineering

Deciphering Electrochemical and Optical Properties of Folic Acid for the Applications of Tissue Engineering and Biofuel Cell

Sharda Nara, Bansi Dhar Malhotra; India
Research Area: Biotechnology and Bioengineering

The Vulnerability of Climate Change to Farmers, Fishermen and Herdsmen in Nigeria

Nasiru Medugu Idris ; Nigeria
Research Area: Marine and Environmental Sciences

Mycoflora Associated with Maize Grains Sampled from All over Egypt

Yasser M. Shabana, Khaled M. Ghoneem, Nehal S. Arafat, Younes M. Rashad, Dalia G. Aseel, Bruce D. L. Fitt, Aiming Qi, Benjamin Richard, Haitham Sayed; Egypt
Research Area: Bioengineering and Life Sciences

A Study on Kinetic of Nitrous Oxide Catalytic Decomposition over CuO/HZSM-5

Y. J. Song, Q. S. Xu, X. C. Wang, H. Wang, C. Q. Li; China
Research Area: Chemical and Materials Engineering

PROGRAM LAST UPDATED: July, 08 2021 13:23

PROGRAM GUIDELINES

1.GUIDE FOR ORAL AND e-POSTER PRESENTATIONS

We kindly ask ORAL presenters to prepare electronic presentations of 15 minutes (allowing 5 minutes for discussions) and e-POSTER presenters to prepare short electronic presentations of 5 minutes (allowing 5 minutes for discussions) (NO PRINT OUTS). A Linux-based operating system is used for both Oral and e-Poster presentations. All presenters should make a PDF file version of their presentation and upload it to the system.

2. ROLE OF THE SESSION CHAIR

The duties of the Session Chair include the following:

1. Arrive at the conference hall at least 10 minutes before the session begins. Identify the paper presenters and discussant(s) in advance, and introduce yourself. Remind each presenter of the time limits that apply, and describe the method you will use to alert them of time limits during the actual presentation.
2. At the start of the session, introduce yourself to the audience, announce the session/title, and offer a brief overview indicating how the papers are related.
3. Prior to each presentation, introduce the speaker, announce the paper’s title, the name(s) of the author(s), and provide brief comments regarding the affiliation and/or background of each presenter. Identify the individual who will be speaking if it is someone other than the first author.
4. During the presentations enforce time limits strictly so that no author (or audience member) monopolizes someone else’s time. Oral paper presentations each have 20 minutes (15 minutes for full presentation papers, 5 minutes for discussions), and 10 minutes for e-Poster (electronic poster) presentations (5 minutes for poster presentation, 5 minutes for discussions).
5. Once presentations are complete (oral paper presentations and e-Poster presentations), the remaining time can be used for informal discussion between the audience and session participants. It is your job to field questions from the audience.
6. Try to conduct the session as informally as possible (e.g., use first names when addressing participants and members of the audience) to encourage as much audience participation as possible.

3. BEST PAPER AWARDS / BEST PRESENTATION AWARDS

A 'Best Paper Award / Best Presentation Award' will be conferred on the author(s) of an abstract or a full paper presented at the conference. Selection is made based on the best combined marks of the abstract / paper review and presentation quality appraisal conducted by the Session Chair at the conference venue, and assessed by the Program Committee. Award winners will be announced after the conference. The author(s) of a selected paper/presentation will receive a signed and stamped official Best Paper Award / Best Presentation Award e-certificate.