Melbourne, November 07-08, 2024 Conference Program

Scholarly Integrity Remarks:

1)Authors must be ready in the meeting room at least 10 minutes prior to the start of the session. Presenters must introduce themselves to the session chair(s) and upload their Oral and ePoster presentations to the computer.

2)Authors must be able to present on any day of the conference – the program cannot be tailored around specific requests from individual authors to present on particular days.

3)The international research conference program is designed for original research contributions and presentations in all research fields. Presentations scheduled in the Oral and ePoster sessions are drawn from a selection of the peer reviewed papers from a wide range of scientific and other disciplines of inquiry.

NOVEMBER 07-08, 2024: DIGITAL PROGRAM

DAY 1: VIRTUAL MEETING
The digital presentation session will start at 11 a.m. (midday) on November 07, 2024 London local time. The link to join the virtual conference will be available for registered delegates 10 minutes before the session at https://waset.org/profile/messages.

DAY 2: PERTINENT READING
Digital program consists of an e-book of relevant studies to download for future reading on November 08, 2024.

Digital Program consists of the e-proceedings book which is available online-only and includes the conference communications (proceedings abstracts and papers). Registered participants can access the digitally available conference proceedings ( and certificates ) by visiting their profile pages.

MEDICAL AND HEALTH SCIENCES RESEARCH

Chair: Anindita Sen

Catalytic Conversion of Biomass to Biofuels Using Perovskite Oxides

Martin Malmgren; Sweden
Research Area: Biomedical and Biological Engineering

A Handheld Light Meter Device for Methamphetamine Detection in Oral Fluid

Anindita Sen; New Zealand
Research Area: Biomedical and Biological Engineering

Graphene-Based Electrochemical Biosensor for Rapid Detection of SARS-CoV-2 Variants

Karl Wiese, Lisa Hagen; Germany
Research Area: Biomedical and Biological Engineering

Quantum Dot-Based Biosensors for Ultrasensitive Detection of Cancer Biomarkers

Mariana Villa, Sergio Zapata, Camila Ortiz; Mexico
Research Area: Biomedical and Biological Engineering

Impedance Spectroscopy of Organ-on-Chip Systems for Drug Screening

Rimantas Grigalavicius, Danute Jukniene, Arunas Kairys; Lithuania
Research Area: Biomedical and Biological Engineering

The Role of the Human Gut Microbiome on Colon Cancer

Chro Kavian; Iran
Research Area: Biomedical and Biological Engineering

Chair: Farida Fathy Eid

An Exploration of Athlete Tattoos

Chen-Yu Chien, Shiow-Fang Shieh; Taiwan
Research Area: Sport and Health Sciences

Gamification and Immersive Experiences in Physical Education: A Meta-Analysis

Alexander Kostov, Borislav Vasilev, Daniela Draganova, Tsvetana Taneva, Petar Kolev; Bulgaria
Research Area: Sport and Health Sciences

Neurofeedback in Physical Education: Enhancing Cognitive Performance

Pieter Maes; Belgium
Research Area: Sport and Health Sciences

Exoskeletons in Sports Training: Enhancing Performance and Rehabilitation

Ketill Sigrid; Iceland
Research Area: Sport and Health Sciences

Genetic Testing in Sports: Identifying Talent and Preventing Injuries

Jasna Popovic, Marijana Vuletic; Croatia
Research Area: Sport and Health Sciences

Ozone Therapy, a Non-Surgical Option for Slip Disc

Shahzad Karim Bhatti; Pakistan
Research Area: Medical and Health Sciences

Endometriosis, Bladder Endometriosis (BE), Urinary Tract Endometriosis (UTE), Robotic-Assisted Surgery

Farida Eid, Hala Nasseif, Hana Mokhtar, Labib Riachi, Mudhar Hasan; United Arab Emirates
Research Area: Medical and Health Sciences

Characterization Transesterification Activity on Thermostable Lipase (LK1) From Local Isolate

Luxy Grebers Swend Sinaga, Akhmaloka; Indonesia
Research Area: Biotechnology and Bioengineering

Chair: E. Martinez

Radiation Shielding Analysis for the NARI 70 MeV Cyclotron Main Structure

Chien-Hsiang Chen, Jeng-Ning Wang, Weng-Sheng Kuo, Hui-Chi Lo, Hsiao-En Shu; Taiwan
Research Area: Health and Medical Engineering

Precision Measurements of the Proton Charge Radius Using Muonic Hydrogen Spectroscopy

Kim Min-Ho; Korea, South
Research Area: Health and Medical Engineering

Nuclear Structure and Collective Excitations in Superheavy Nuclei

Xanthe Martinez, Isla Thomas; United States
Research Area: Health and Medical Engineering

Dark Matter Direct Detection Experiments with Cryogenic Detectors

Rhys Barlow; United States
Research Area: Health and Medical Engineering

Higgs Boson Production and Decay in the High-Luminosity LHC Era

Jasmine Squamish, Ezekiel Lee; New Zealand
Research Area: Health and Medical Engineering

The Impact of Working Environment Condition and Lifestyle Factors in Male Infertility in South of Iran

Shabnam Etemadi; Iran
Research Area: Medical and Health Sciences

Generalized Linear Modeling of HCV Infection Among Medical Waste Handlers in Sidama Region, Ethiopia

Birhanu Betela Warssamo; Ethiopia
Research Area: Medical and Health Sciences

Chair: A. Nowak

Your Second Step to Understanding Research Ethics: Psycho-Methodological Approach

Sadeq Al Yaari, Ayman Al Yaari, Adham Al Yaari, Montaha Al Yaari, Aayah Al Yaari, Sajedah Al Yaari; Croatia
Research Area: Medical and Health Sciences

Nanobot-Mediated Drug Delivery Systems for Targeted Cancer Therapy

Karen Bonython; Australia
Research Area: Medical and Health Sciences

Exoskeleton Robotics for Rehabilitation: Improving Mobility in Stroke Patients

Sun Lili, Ma Junjun, Guo Weiwei; China
Research Area: Medical and Health Sciences

Genomic Sequencing for Precision Medicine in Rare Genetic Disorders

Thomas Witte, Ursula Ziegler; Germany
Research Area: Medical and Health Sciences

Collective Problem Solving: Tackling Obstacles and Unlocking Opportunities for Young People Not in Education, Employment, or Training

Kalimah Ibrahiim, Israa Elmousa; United Kingdom
Research Area: Medical and Health Sciences

Associated Factors of Hypercholesterolemia, Hyperuricemia and Double Burden of Hypercuricémia-Hypercholesterolemia in Gout Patients: Hospital Based Study

Pierre Mintom, Armel Assiene Agamou, Leslie Toukem, William Dakam, Christine Fernande Nyangono Biyegue; Cameroon
Research Area: Bioengineering and Life Sciences

In-vivo and In-vitro Neutralization Effect of Annona Senegalensis Root Extract Against Naja Nigricollis Crude Venom Toxicity

Aliyu Idris Kankara, Akos Noel Ibrahim, Binta Kurfi; Nigeria
Research Area: Biotechnology and Bioengineering

TLR4 Gene Polymorphism and Biochemical Markers as a Tool to Identify Risk of Osteoporosis in Women from Karachi

Rozeena Baig, R. Rehana Rehman, Rifat Ahmed; Pakistan
Research Area: Medical and Health Sciences

Dental Management Particularities of Werner Syndrome: A Report of Two Cases

Emna Abid, Linda Chebbi, Yosra Mabrouk, Amel Labidi, Lamia Mansour; Tunisia
Research Area: Medical and Health Sciences

Difficulties and Mistakes in Diagnosis During Brucellosis in Children

Tarana Taghi-Zada, Ulviyya Haciyeva; Azerbaijan
Research Area: Medical and Health Sciences

Chair: E. Eugenija

3D-Printed Models for Pelvic Floor Dysfunction Surgery Planning

Muthu Perumal, Kamal Sulaiman, Mohamad Ali; Malaysia
Research Area: Medical and Health Sciences

Robotic-Assisted Laparoscopic Hysterectomy: A Comparative Study

Lusine Grigoryan, AstghikTadevosyan, Anna Hovhannisyan; Armenia
Research Area: Medical and Health Sciences

Ectopic Pregnancy: A Case of Consecutive Occurrences of Different Types

Wania Mohammad Akram, Swetha Kannan, Urooj Shahid, Aisha Sajjad; United Arab Emirates
Research Area: Medical and Health Sciences

Successful Treatment of Endometriosis with Novel Laser Therapy

Irene Efstathiou, George Georgiou, Neokles Neocleous; Cyprus
Research Area: Medical and Health Sciences

Stem Cell Therapy for Infertility: Ethical Implications

Elisa Laita; Finland
Research Area: Medical and Health Sciences

Chair: E. Gudmundur

Hypertension and Its Determinants in Abu Dhabi Population: A Retrospective Cohort Study

Latifa Baynouna AlKetbi, Basil Al Hashaikeh, Toqa Fahmawee, Yusra Sahalu, Mouza Hamad Helal AlKuwaiti, Nico Nagelkerke, Mohammad Sahyouni; United Arab Emirates
Research Area: Medical and Health Sciences

Hybrid Operating Room for Complex Cardiac Interventions

Maria Alexandris, Giannis Efstathiou, Vasilis Tsigaridis; Greece
Research Area: Medical and Health Sciences

Nanoparticle-Enhanced Drug Delivery for Myocardial Infarction

Ragnhild Olsen; Norway
Research Area: Medical and Health Sciences

Biodegradable Stents with Integrated Drug Release for Post-Angioplasty Restenosis

Quinn Singh, Beth Zhang; United Kingdom
Research Area: Medical and Health Sciences

Uncommon Presentation of Iscahemic Heart Disease with Sheehan’s Syndrome at Mid-Level Private Hospital of Bangladesh and Its Management- A Case Report

Nazmul Haque, Syeda Tasnuva Maria; Bangladesh
Research Area: Health and Medical Engineering

Chair: D. Djokovic

Augmented Reality Guidance for Percutaneous Nephrolithotomy

Günay Velikul, Mehmet Ersoy, Kadir Boğa; Türkiye
Research Area: Medical and Health Sciences

Nanoparticle-Mediated Drug Delivery for Targeted Therapy of Prostate Cancer

Carlos Cabral, Maria Machado; Brazil
Research Area: Medical and Health Sciences

Effect of Ethanol and Betadine on the Preformed Biofilm of Staphylococcus Aureus Isolated from Urinary Catheter

Kara Terki Ibtissem, Hassaine Hafida, Bellifa Samia; Algeria
Research Area: Medical and Health Sciences

Antibiotic Resistance in Urological Infections: Strategies for Prevention and Management

Wang Yifei, Li Xiaoming, Zhang Wei; China
Research Area: Medical and Health Sciences

Gene Editing Techniques for Treatment of Cystic Kidney Disease

Chen Ming-Wei, Lin Yi-Chen; Taiwan
Research Area: Medical and Health Sciences

Chair: L. Dimitrov

Vertiginous Giddiness and Upbeat Nystagmus in Pregabalin Treatment

Jongmoon Kim; Singapore
Research Area: Medical and Health Sciences

Opioid-Free Pain Management Strategies for Chronic Pain Patients

Benjamin Bonello; Malta
Research Area: Medical and Health Sciences

Gene Therapy for Hearing Loss: Recent Advances and Clinical Trials

Thaksin Rattanawong, Nakhon Phang, Inthira Petch; Thailand
Research Area: Medical and Health Sciences

Exosomal MicroRNA Biomarkers in the Diagnosis of Stroke and Traumatic Brain Injury

Francisco Javier Aponte, Maria Isabel Araujo, Antonio Jose Arias; Venezuela
Research Area: Medical and Health Sciences

3D Printing of Biocompatible Ear Implants

Drita Gashi, Blerim Rexhepi, Arjeta Berisha, Besnik Krasniqi; Kosovo
Research Area: Medical and Health Sciences

Chair: E. Novak

Impact of Variability in Delineation on PET Radiomics Features in Lung Tumors

Mahsa Falahatpour; Iran
Research Area: Biomedical and Biological Engineering

Potential Benefits of FDG-PET Radiomic Feature Map for Target Volume Delineation in Lung Cancer Radiation Therapy

Mahsa Falahatpour, Parham Geramifa, Alireza Nikoofar, Seyed Rabie Mahdavi; Iran
Research Area: Biomedical and Biological Engineering

Generative Adversarial Networks for Synthetic Lung Cancer Image Generation

Karan Pandey, Riya Tiwari, Gaurav Srivastava, Meera Chaudhary, Diksha Meena; India
Research Area: Biomedical and Biological Engineering

Automated Target Volume Delineation in Lung Cancer Using Radiomics and PET/CT

Peter Schuster; Switzerland
Research Area: Biomedical and Biological Engineering

Radiomics-Based Prediction of Response to Radiation Therapy in Lung Cancer Patients

Adrian Savulescu, Cristina Gheorghe, Nicolae Constantin; Romania
Research Area: Biomedical and Biological Engineering

Characterization of (GRAS37) Gibberellin Acid Insensitive (GAI), Repressor (RGA), and Scarecrow (SCR) Gene by Using Bioinformatics Tools

Yusra Tariq; Pakistan
Research Area: Biotechnology and Bioengineering

Chair: E. Nowak

Personalized Robotics for Autism Spectrum Disorder: A Case Study of Social Interaction

Michal Rydz, Agnieszka Sowa; Poland
Research Area: Medical and Health Sciences

The Impact of Artificial Intelligence on Autism Attitudes and Laws

Narges Arsanious Kamel Arsanious; Egypt
Research Area: Medical and Health Sciences

Genetic Risk Factors for Autism Spectrum Disorder: A Review of Recent Findings

Kostadin Nikolov, Mihail Alexandrov, Hristo Kostov; Bulgaria
Research Area: Medical and Health Sciences

Functional Connectivity Analysis of the Default Mode Network in Autism Spectrum Disorder

Chaiwat Intharat, Khamla Lert, Nanthavong Phraew, Rattanawong Sanit; Thailand
Research Area: Medical and Health Sciences

Oxytocin Administration for Social Communication Deficits in Autism Spectrum Disorder

Camille Bonnet; France
Research Area: Medical and Health Sciences

An Evidence-Based Laboratory Medicine (EBLM) Test to Help Doctors in the Assessment of the Pancreatic Endocrine Function

Sergio J. Calleja, Adria Roca, José D. Santotoribio; United States
Research Area: Medical and Health Sciences

Chair: V. Papadopoulos

Synthetic Biology Approach to Engineering Microbial Factories for Production of Natural Drug Compounds

Wang Lin, Li Ming; China
Research Area: Pharmacological and Pharmaceutical Sciences

Development of a Biodegradable Polymer-Based Drug Delivery System for Controlled Release of Anti-Inflammatory Agents

Chen Ming-Wei; Taiwan
Research Area: Pharmacological and Pharmaceutical Sciences

VII Phytochemistry UNIT-IV Glycoside

Magy Magdy Danial Riad; Egypt
Research Area: Pharmacological and Pharmaceutical Sciences

Comparative Efficacy and Safety of Biosimilar Drugs Versus Original Biologics

Kato Hiroto; Japan
Research Area: Pharmacological and Pharmaceutical Sciences

Impact of Drug Pricing Policies on Patient Access and Outcomes

Phumla Tshabalala, Sihle Vilakazi; South Africa
Research Area: Pharmacological and Pharmaceutical Sciences

Chair: V. Petrova

Synergistic Effect of Inorganic Fillers and Polymer Matrices on the Thermal Stability of Hybrid Composites

Ioana Chirița, Raluca Tataru; Romania
Research Area: Materials and Metallurgical Engineering

Synergistic Effect of Exfoliated Graphene and Carbon Nanotubes in Hybrid Materials for Improved Mechanical Properties

Sanan Thanawat, Soisuk Chanida, Thaweesak Panupong; Thailand
Research Area: Materials and Metallurgical Engineering

Enhanced Flame Retardancy and Thermal Stability of Polypropylene Nanocomposites Incorporating Exfoliated Graphene Nanoplatelets

Michal Kaczmarek, Joanna Kwiatkowski, Alicja Lis; Poland
Research Area: Materials and Metallurgical Engineering

Influence of Exfoliated Graphene Nanoplatelets on Thermal Stability of Polypropylene Reinforced Hybrid Graphen-rice Husk Nanocomposites

Obinna Emmanuel Ezenkwa, Sani Amril Samsudin, Azman Hassan, Ede Anthony; Nigeria
Research Area: Materials and Metallurgical Engineering

3D Printing of Graphene Nanoplatelet-Containing Composites for Complex and Customized Structures

Mustafa Kara, Ahmet Çoban, Sezai Parlar; Türkiye
Research Area: Materials and Metallurgical Engineering

Self-Healing Graphene Nanoplatelet/Polymer Nanocomposites for Enhanced Durability and Longevity

Kazuya Sasaki; Japan
Research Area: Materials and Metallurgical Engineering

Chair: A. Janssen

Method for Selecting and Prioritising Smart Services in Manufacturing Companies

Till Gramberg, Max Kellner, Erwin Gross; Germany
Research Area: Computer and Information Engineering

Smart Services for Easy and Retrofittable Machine Data Collection

Till Gramberg, Erwin Gross, Christoph Birenbaum; Germany
Research Area: Computer and Information Engineering

Developing a Sustainable Business Model for Platform-Based Applications in Small and Medium-Sized Enterprise Sawmills: A Systematic Approach

Franziska Mais, Till Gramberg; Germany
Research Area: Computer and Information Engineering

Servitization in Machine and Plant Engineering: Leveraging Generative AI for Effective Product Portfolio Management Amidst Disruptive Innovations

Till Gramberg; Germany
Research Area: Computer and Information Engineering

Product Portfolio Strategy in the Age of Subscription Economics

Lena See, Max Richter; Germany
Research Area: Computer and Information Engineering

Value Co-Creation in Servitization: A Digital Twin Approach

Janna Keizer; Netherlands
Research Area: Computer and Information Engineering

Reinforcement Learning for Autonomous Control of Industrial Robots

Samy Subramaniam, Kaur Singh, Subramaniam Krishnan; Malaysia
Research Area: Computer and Information Engineering

AI-Driven Autonomous Robotics for Flexible Manufacturing Lines

Tor Strand; Norway
Research Area: Computer and Information Engineering

Augmented Reality Applications for Active Learning in Geometry: Enhancing Mathematical Intelligence at Phra Dabos School

Nattamon Srithammee, Ratchanikorn Chonchaiya; Thailand
Research Area: Computer and Information Engineering

Chair: A. Thompson

Assessment of the Effect of Farmer-Herder Conflict on the Livelihood of Rural Households in Bogoro Local Government Area of Bauchi State, Nigeria

Luka Jumma Gizaki; Nigeria
Research Area: Agricultural and Biosystems Engineering

Model Based Design and Development of Horticultural Produce Crate from Bamboo

Sisay Wondmagegn Molla, Mulugeta Admasu Delele, Tadelle Nigusu Mekonen; Ethiopia
Research Area: Agricultural and Biosystems Engineering

A System Dynamics Analysis of Food Security Challenges in Developing Countries

Eric Davidson, Xie Ming; Canada
Research Area: Environmental and Ecological Engineering

Developing a Dynamic Energy Flow Model to Assess the Sustainability of Agro-Ecological Systems

Ethan Updike, Luis Fitzgerald; United States
Research Area: Environmental and Ecological Engineering

A Spatiotemporal Analysis of Urban Heat Island Effect Mitigation Using Green Infrastructure and Smart Technologies

Jessica Folger, Christopher Lavoie; United States
Research Area: Environmental and Ecological Engineering

The System-Dynamic Model of Sustainable Development Based on the Energy Flow Analysis Approach

Inese Trusina, Elita Jermolajeva, Viktors Gopejenko, Viktor Abramov; Latvia
Research Area: Environmental and Ecological Engineering

Exploring the Genetic Architecture of Chicken Resistance to Avian Influenza Virus

Haile Berihulay, Chenglong Luo; China
Research Area: Animal and Veterinary Sciences

Chair: Behnaz Pahlousay

Domination Parameters of Middle Graphs: Connected and Outer-Connected Perspectives

Behnaz Pahlousay, Farshad Kazemnejad, Elisa Palezzato, Michele Torielli; Japan
Research Area: Mathematical and Computational Sciences

Discrete Differential Geometry for Shape Analysis in Computer Vision

Ahmet Nallı, Füsun Batur, İlyas Gemici; Türkiye
Research Area: Mathematical and Computational Sciences

Discrete Differential Geometry for Shape Analysis of 3D Printed Objects

Giedrius Baranauskas, Rūta Grigaitis, Mindaugas Juozaitis; Lithuania
Research Area: Mathematical and Computational Sciences

Spectral Clustering of Graph Laplacian Matrices for Image Segmentation

Gergely Antal, Petra Szalai; Hungary
Research Area: Mathematical and Computational Sciences

Graph Coloring Algorithms for Optimal Network Resource Allocation in 5G IoT Systems

Mohan Valmiki, Seema Lodha, Rakesh Saini, Vikas Kumar; India
Research Area: Mathematical and Computational Sciences

Subsurface Water in Mars' Shallow Diluvium Deposits: Evidence from Tianwen-1 Radar Observations

Changzhi Jiang, Chunyu Ding, Yan Su, Jiawei Li, Ravi Sharma, Yuanzhou Liu, Jiangwan Xu; China
Research Area: Aerospace and Mechanical Engineering

Lunar Exploration based on Ground-Based Radar: Current Research Progress and Future Prospects

Jiangwan Xu, Chunyu Ding; China
Research Area: Aerospace and Mechanical Engineering

Electron Transfer Rates in Polar and Non-Polar Environments: A Generalization of Marcus’ Theory to Include an Effective Treatment of Tunneling Effects

Anna Leo, Andrea Peluso; Italy
Research Area: Chemical and Molecular Engineering

Chair: E. Kovačević

Design of Reinforced Concrete with Eurocode 2

Carla Ferreira, Helena Barros; Portugal
Research Area: Structural and Construction Engineering

Examples of RC Design with Eurocode2

Carla Ferreira, Helena Barros; Portugal
Research Area: Structural and Construction Engineering

Predicting Subsurface Abnormalities Growth Using Physics-Informed Neural Networks

Mehrdad Shafiei Dizaji, Hoda Azari; United States
Research Area: Structural and Construction Engineering

Advanced Finite Element Analysis for Complex Structural Systems

Chen Ming-Wei, Lin Yi-Ting; Taiwan
Research Area: Structural and Construction Engineering

Self-Healing Concrete: An Advanced Approach to Enhancing Durability

Valerio Bonanno; Italy
Research Area: Structural and Construction Engineering

Comparative Analysis of Eurocode 2 and National Codes for Reinforced Concrete Design

Vesna Veselinovic, Zoran Smiljanic, Anastasija Ciric; Serbia
Research Area: Structural and Construction Engineering

Chair: M. Dubois

Integrated Water Treatment Systems Utilizing Electrocatalysis and Solar Energy

Campineanu Maria, Munteanu Mihai, Radulescu Ana, Ursu Daniel; Romania
Research Area: Civil and Environmental Engineering

Electrochemical Synthesis of Graphene-Based Composites for Energy Storage Applications

Jordi Ribes, Eva Pujol, Marc Martorell; Spain
Research Area: Civil and Environmental Engineering

Nickel Oxide-Nitrogen-Doped Carbon (Ni/NiOx/NC) Derived from Pyrolysis of 2-Aminoterephthalic Acid for Electrocatalytic Oxidation of Ammonia

Yu-Jen Shih, Juan-Zhang Lou; Taiwan
Research Area: Civil and Environmental Engineering

Optimization of Ammonia Oxidation Processes for Wastewater Treatment and Nutrient Recovery

Ermira Krasniqi, Rozafa Leka, Valbona Kola, Besnik Shabani; Albania
Research Area: Civil and Environmental Engineering

Pyrolysis of Biomass for the Production of High-Value Nanomaterials

Marie Martin, Pierre Bernard, Sophie Robert; France
Research Area: Civil and Environmental Engineering

Chair: V. Petrova

Marketing and Business Intelligence and Their Impact on Products and Services Through Understanding Based on Experiential Knowledge of Customers in Telecommunications Companies

Ali R. Alshawawreh, Francisco Liébana-Cabanillas, Francisco J. Blanco-Encomienda; Spain
Research Area: Computer and Information Engineering

Inhouse Inhibitor for Mitigating Corrosion in the Algerian Oil and Gas Industry

Hadjer Didouh, Mohamed Hadj Meliani, Izzeddine Sameut Bouhaik; Algeria
Research Area: Chemical and Materials Engineering

The Effect of Si Content on the Physical Properties of Nanostructured (Ni75Fe25)100-xSix Alloy Elaborated by Mechanical Alloying

A. Kaibi, A. Guittoum, M. Hemmous, D. Martínez-Blanco, P. Gorria, J. A. Blanco, M. Kechouane; Algeria
Research Area: Materials and Metallurgical Engineering

CFD Simulation of Turbulent Flow in Microchannel Heat Exchangers with Graphene Oxide Nanofluid

Giorgi Abashidze, Tamar Amirejibi, Nika Beridze, Ana Chakhnashvili; Georgia
Research Area: Civil and Environmental Engineering

Hydrogen Production from Biomass Gasification: A Review of Catalytic Processes and Reactor Technologies

Liu Mingyue, Chen Haoran, Yang Xinwei; China
Research Area: Civil and Environmental Engineering

Carrying Capacity Estimation for Small Hydro Plant Located in Torrential Rivers

Elena Carcano, James Ball, Betty Tiko; Italy
Research Area: Civil and Environmental Engineering

Numerical Modeling of Blood Flow Dynamics in Aortic Aneurysms with Stent Grafts

Ignacy Lewandowska, Jacek Kowalski, Karolina Nowacka; Poland
Research Area: Civil and Environmental Engineering

Bioremediation of Contaminated Soil Using Engineered Bacteria with Enhanced Degradation Capabilities

Maisie Croft; United Kingdom
Research Area: Civil and Environmental Engineering

Chair: E. Nagy

Personalized Nutrition Plans Based on Genetic Predispositions and AI Algorithms

Ferenc Farkas, Szilvia Onodi, Robert Vincze; Hungary
Research Area: Nutrition and Food Engineering

Nanotechnology-Enhanced Food Packaging for Preserving Nutrient Integrity

Maria Papadopoulos, Dimitris Ioannidis, Elena Georgiou; Greece
Research Area: Nutrition and Food Engineering

Effects of Cow Milk and Camel Milk on Improving Covered Distance in the 6-Minute Walk Test Performed by Obese Young Adults

Mo'ath F. Bataineh; United Arab Emirates
Research Area: Nutrition and Food Engineering

Muscle Fiber Type Distribution and Strength Gains in Elite Athletes

Luca Santoro, Francesco Gallo; Italy
Research Area: Nutrition and Food Engineering

Comparative Analysis of Omega-3 Fatty Acid Content in Traditional and Cultured Algae

Marcos Gomes, Ana Barbosa, Pedro Cardoso, Luiza Fernanda Ribeiro; Brazil
Research Area: Nutrition and Food Engineering

Macroscopic Lesions and Histological Changes Caused by Non-Biodegradable Foreign Bodies in the Rumen of Cattle

Rouabah Zahra, Tlidjane Madjid, Belkacem Lilia, Hafid Nadia, Mallem Mouna; Algeria
Research Area: Animal and Veterinary Sciences

Impact of Breed and Physiological Status on Blood Content of Goats in Arid Conditions of Algeria

Lilia Belkacem, Zahra Rouabah, Assia Allaoui, Karina Bachtarzi, Souhila Belkadi, Boubakeur Safsaf, Madjid Tlidjane; Algeria
Research Area: Animal and Veterinary Sciences

Mapping Forest Biodiversity Using Remote Sensing and Field Data in the National Park of Tlemcen (Algeria)

Bencherif Kada; Algeria
Research Area: Environmental and Ecological Engineering

Chair: Abdulrazak Jinadu

Development IoT System for Smart Maize Production in Nigeria

Oyenike M. Olanrewaju, Faith O. Echobu, Aderemi G. Adesoji, Emmy Danny Ajik, Joseph Nda Ndabula, Stephen Luka; Nigeria
Research Area: Agricultural and Biosystems Engineering

Characterization of Fresh, Charcoal Flue Gas Treated and Boiled Beef Samples Using FTIR For Consumption Safety

Catherine W. Njeru, Clarence Murithi W., Isaac W. Mwangi, Ruth Wanjau, Grace N. Kiriro, Gerald W. Mbugua; Kenya
Research Area: Agricultural and Biosystems Engineering

Elevating Environmental Impact Assessment through Remote Sensing in Engineering

Spoorthi Srupad; India
Research Area: Environmental and Ecological Engineering

Perovskite Solar Cells with Enhanced Efficiency and Stability

Akira Ueda, Chiaki Kudo, Eiji Tanaka; Japan
Research Area: Environmental and Ecological Engineering

Wind Turbine Blade Optimization for Maximum Power Generation

Marine Charentais; France
Research Area: Environmental and Ecological Engineering

Electrochemical Sensor for Rapid Detection of Heavy Metals in Water

Suharto Adi, Sukarno Prasetyo, Widoro Budi, Wibowo Darmawan; Indonesia
Research Area: Environmental and Ecological Engineering

Design of a Plant to Produce 100,000 MTPY of Green Hydrogen from Brine

Abdulrazak Jinadu Otaru, Ahmed Almulhim, Hassan Alhassan, Mohammed Sabri; Saudi Arabia
Research Area: Environmental and Ecological Engineering

NOVEMBER 07-08, 2024: DIGITAL PROGRAM

DAY 1: VIRTUAL MEETING
The digital presentation session will start at11 a.m. (midday) on November 07, 2024 London local time. The link to join the virtual conference will be available for registered delegates 10 minutes before the session at https://waset.org/profile/messages.

DAY 2: PERTINENT READING
Digital program consists of an e-book of relevant studies to download for future reading on November 08, 2024.

Digital Program consists of the e-proceedings book which is available online-only and includes the conference communications (proceedings abstracts and papers). Registered participants can access the digitally available conference proceedings ( and certificates ) by visiting their profile pages.

ENGINEERING AND PHYSICAL SCIENCES RESEARCH

Chair: Z. Durović

Study the Performance of Metal-Organic Framework in Adsorptive Desulfurization for Gas Oil

Hoda A. Mohammed, Esraa M. El-Fawal, Howaida M. Abd El-Salam; Egypt
Research Area: Chemical and Materials Engineering

Synthesis of High-Performance Polymers from Recycled Plastics

Tim Verhoef; Netherlands
Research Area: Chemical and Materials Engineering

Seismic Inversion for Fault Detection in Shale Gas Formations

Liam Gawler; Canada
Research Area: Chemical and Materials Engineering

Carbon Capture and Storage in Depleted Oil and Gas Reservoirs

Tiina Rakvere, Andres Tartu, Kadri Viljandi; Estonia
Research Area: Chemical and Materials Engineering

Temperature Effect on Changing of Electrical Impedance and Permittivity of Ouargla (Algeria) Dunes Sand at Different Frequencies

Naamane Remita, Mohammed laïd Mechri, Nouredine Zekri, Smaïl Chihi; Algeria
Research Area: Materials and Metallurgical Engineering

Low Light Image Enhancement with Multi-Stage Interconnected Autoencoders Integration in Pix to Pix GAN

Muhammad Atif, Cang Yan; Pakistan
Research Area: Computer and Information Engineering

The Right to City between Theory and Practice

Kais Nasser; Israel
Research Area: Urban and Civil Engineering

Chair: Daisy Badilla

Comparative study of the technical efficiency of the cotton farms in the towns of Banikoara and Savalou

Boukari Abdou Wakilou; Benin
Research Area: Agricultural and Biosystems Engineering

Studying the Impact of Agricultural Producers Support Policy in Export Market

Yazdani Saeed, Rafiei Hamed, Nekoofar Farahnaz; Iran
Research Area: Agricultural and Biosystems Engineering

Evaluation of Coagulation Efficiency of Protein Extracts from Lupinus Albus L., Moringa Stenopetala Cufod., Trigonella Foenum-Graecum L. And Vicia Faba L. For Water Purification

Neway Adele, Adey Feleke; Ethiopia
Research Area: Environmental and Ecological Engineering

Indoor Air Pollution Control Using a Soil Biofilter

Daisy B. Badilla, Peter A. Gostomski; Philippines
Research Area: Environmental and Ecological Engineering

Study on Horizontal Ecological Compensation Mechanism in Yangtze River Economic Belt Basin: Based on Evolutionary Game Analysis and Water Quality and Quantity Model

Tingyu Zhang; China
Research Area: Environmental and Ecological Engineering

Research on Territorial Ecological Restoration in Mianzhu City, Sichuan, under the Dual Evaluation Framework

Wenqian Bai; China
Research Area: Environmental and Ecological Engineering

Geoengineering for Climate Crisis: Ethical Implications and Technological Feasibility

Fotis Efstathiou, Yannis Tsiropoulos, Maria Kalogeropoulos; Greece
Research Area: Environmental and Ecological Engineering

Resilience in the Face of Cyberattacks: A Case Study of Critical Infrastructure

Charlotte Sheldon, Matthew Hodge; United Kingdom
Research Area: Environmental and Ecological Engineering

Time Series Analysis of Radon Concentration at Different Depths in an Underground Goldmine

Theophilus Adjirackor, Frederic Sam, Irene Opoku-Ntim, David Okoh Kpeglo, Prince K. Gyekye, Frank K. Quashie, Kofi Ofori; Ghana
Research Area: Environmental and Ecological Engineering

Gender, Climate Change, and Resilience in Kenyan Pastoralist Communities

Anne Waithira Dormal; Spain
Research Area: Environmental and Ecological Engineering

Spatio-temporal Distribution of Surface Water Quality in the Kebir Rhumel Basin, Algeria

Lazhar Belkhiri, Ammar Tiri, Lotfi Mouni, Fatma Elhadj Lakouas; Algeria
Research Area: Environmental and Ecological Engineering

Statistical Analysis of Earthquakes Recorded in Turkey in 2023

Mohammed H.Mousavi, Malihe Maqouli, Mozhgan Azizi; Iran
Research Area: Geological and Environmental Engineering

Review on Outbreak Dynamics, the Endemic Serotypes, and Diversified Topotypic Profiles of Foot and Mouth Disease Virus Isolates in Ethiopia from 2008 to 2018

Ashenafi Kiros Wubshet, Junfei Dai, Qian Li, Jie Zhang; China
Research Area: Animal and Veterinary Sciences

Chair: R. Fiore

The Impact of Artificial Intelligence on Food Industry

George Hanna Abdelmelek Henien; Egypt
Research Area: Nutrition and Food Engineering

Quercetin Nanoparticles and Their Hypoglycemic Effect in a CD1 Mouse Model with Type 2 Diabetes Induced by Streptozotocin and a High-Fat and High-Sugar Diet

Adriana Garcia-Gurrola, Carlos Adrian Peña Natividad, Ana Laura Martinez Martinez, Alberto Abraham Escobar Puentes, Estefania Ochoa Ruiz, Aracely Serrano Medina, Abraham Wall Medrano, Simon Yobanny Reyes Lopez; Mexico
Research Area: Nutrition and Food Engineering

Exosomal MicroRNAs as Biomarkers for Early Diabetes Detection

Peter Zorn; Italy
Research Area: Nutrition and Food Engineering

Self-Assembling Nanostructures for Targeted Drug Delivery in Oncology

Mariana Machado, Andre Pinheiro; Portugal
Research Area: Nutrition and Food Engineering

Nanoparticle-Mediated siRNA Delivery for Gene Therapy of Metabolic Disorders

Tan Wei Ming; Singapore
Research Area: Nutrition and Food Engineering

Chair: Z. Kowalczyk

Mechanical Properties and Crack Extension Mechanism of Rock Contained Blocks Under Uniaxial Compression

Ruiyang Bi; Australia
Research Area: Geotechnical and Geological Engineering

Characterization of the Viscoelastic Behavior of Rock Under Cyclic Loading

Elina Koivunen; Finland
Research Area: Geotechnical and Geological Engineering

Development of an Advanced Rock-Cutting Tool for Enhanced Efficiency in Mining

Z. Kowalczyk, T. Nowak, A. Wozniak, M. Jablonski; Poland
Research Area: Geotechnical and Geological Engineering

Numerical Modeling of Rock Fracture Propagation Using Discrete Element Method

V. Mahuta; New Zealand
Research Area: Geotechnical and Geological Engineering

Assessment of Sediment Control Characteristics of Notches in Different Sediment Transport Regimes

Chih Ming Tseng; Taiwan
Research Area: Geotechnical and Geological Engineering

Nonlinear Free Vibrations of Functionally Graded Cylindrical Shells

Alexandra Andrade Brandão Soares, Paulo Batista Gonçalves; Brazil
Research Area: Structural and Construction Engineering

The Impact of Artificial Intelligence on Construction Engineering

Mina Fawzy Ishak Gad Elsaid; Egypt
Research Area: Civil and Architectural Engineering

The Effect of Artificial Intelligence on Civil Engineering and Construction

Remon Nageh Fayez Youakim; Egypt
Research Area: Civil and Architectural Engineering

Reducing Per-and Polyfluoroalkyl Substances (PFAS) Water Contamination with Mycorrhizal Hydroponics Plants

Neel Ahuja; United States
Research Area: Civil and Environmental Engineering

Chair: L. Schönberg

Fault Diagnosis and Prognosis of Turbine Generator Bearings Using Vibration Analysis

Arnas Petraitis, Gintare Simkute; Lithuania
Research Area: Aerospace and Mechanical Engineering

Transient CFD Analysis of Surge and Stall Phenomena in Centrifugal Compressors

Fatima Al-Ahmad, Amina Al-Fadhel; Kuwait
Research Area: Aerospace and Mechanical Engineering

Turbulence Modeling and Simulation of Flow Past Complex Geometries Using AI-Driven Techniques

Akaki Abashidze, Nino Akhalkatsi, Giorgi Gogichaishvili, Mariam Tsereteli; Georgia
Research Area: Aerospace and Mechanical Engineering

Significance of Transient Data and Its Applications in Turbine Generators

Chandra Gupt Porwal, Preeti C. Porwal; India
Research Area: Aerospace and Mechanical Engineering

Computational Fluid Dynamics Analysis of Flow-Induced Vibrations in Next-Generation Wind Turbine Blades

Lisa Hütte; Germany
Research Area: Aerospace and Mechanical Engineering

Simulation Study on Particle Fluidization and Drying in a Spray Fluidized Bed

Jinnan Guo, Daoyin Liu; China
Research Area: Mechanical and Industrial Engineering

Assessment of the Thermal and Mechanical Properties of Bio-based Composite Materials for Thermal Insulation

Nega Tesfie Asfaw, Rafik Absi, Labouda B. A, Ikram El Abbassi; France
Research Area: Materials and Textile Engineering

Chair: V. Petrović

Graphene Oxide-Reinforced Polymer Composites for Lightweight and Durable Structures

Miha Krajnc, Tina Kosir; Slovenia
Research Area: Electrical and Computer Engineering

Quantum Dot-Silicon Hybrid Structures for Scalable Quantum Computing

Ganesan Subramaniam, Tan Wei Ling, Lim Chee Seng; Malaysia
Research Area: Electrical and Computer Engineering

Solar-Blind Ni-Schottky Photodetector Based on MOCVD Grown ZnGa₂O₄

Taslim Khan, Ray Hua Horng, Rajendra Singh; India
Research Area: Electrical and Computer Engineering

Nanoparticle-Enhanced Photocatalysis for Water Purification and Pollution Control

Hristina Hristova, Dragan Draganov, Tatyana Taneva; Bulgaria
Research Area: Electrical and Computer Engineering

Perovskite Solar Cells with Efficiency Beyond 25%

Elias Skoglund; Sweden
Research Area: Electrical and Computer Engineering

Automatic Calibration of Agent-Based Models Using Deep Neural Networks

Sima Najafzadehkhoei, George Vega Yon; United States
Research Area: Computer and Information Engineering

Chair: L. Wagner

Spatial Autocorrelation Analysis of Housing Prices and Socioeconomic Factors in Barcelona

Daniel Casas; Spain
Research Area: Urban and Civil Engineering

Modelling Urban Rigidity and Elasticity Growth Boundaries: A Spatial Constraints-Suitability Based Perspective

Pengcheng Xiang Jr., Xueqing Sun, Dong Ngoduy; China
Research Area: Urban and Civil Engineering

Spatial Econometrics: Analyzing the Spatial Autocorrelation of Housing Prices in Metropolitan Areas

Eva Kucera, Jan Hruska, Alena Ríha; Czechia
Research Area: Urban and Civil Engineering

Geographic Information Systems: Integrating LiDAR Data for 3D Urban Modeling

Katarina Petrovic, Marija Jovanovic; Croatia
Research Area: Urban and Civil Engineering

Chair: N. Andersen

The Role of Ventromedial Nucleus of the Hypothalamus in Regulation Sleep and Hyperactive Actions

Thao Phan Ngoc Tran, Kanako Iwasaki, Deependra Kumar, Hiroto Noguchi, Hotaka Takizawa, Hiromasa Funato, Masashi Yanagisawa; Japan
Research Area: Cognitive and Language Sciences

Neuropharmacological Interventions for Stress-Induced Sleep Disruptions

Anna Lund, Ida Holm; Denmark
Research Area: Cognitive and Language Sciences

Neuroimaging Studies of Reward Processing in the Ventromedial Hypothalamus

Sara Russello, Giovanni Silvestri, Roberta Rizzo; Italy
Research Area: Cognitive and Language Sciences

Optogenetic Manipulation of Circadian Rhythm Neurons in the Hypothalamus to Treat Jet Lag

Sarah Vanderbilt; Canada
Research Area: Cognitive and Language Sciences

Deep Brain Stimulation of the Ventromedial Hypothalamus for Chronic Insomnia

Wang Wei, Li Ming, Zhang Qiang; China
Research Area: Cognitive and Language Sciences

How Openness to Experience Relates to Electoral Behaviour among Senior Non-Teaching Employees of Nnamdi Azikiwe University, Awka

Nweke Kingsley; Nigeria
Research Area: Psychological and Behavioral Sciences

The International Monetary Fund’s Treatment Towards Argentina and Brazil During Financial Negotiations for Their First Adjustment Programs, 1958-64

Fernanda Conforto de Oliveira; Brazil
Research Area: Humanities and Social Sciences

Implementing Community Policing in Nigeria: Problems and Prospects

Mohammed Jamilu Haruna, Kawu Adamu Sule; Nigeria
Research Area: Humanities and Social Sciences

Vertical and Horizontal Mismatches in Thailand and the Wage Penalty

Potjana Chunthanom; Thailand
Research Area: Economics and Management Engineering

Challenging Convections: Rethinking Literature Review Beyond Citations

Hassan Younis; Jordan
Research Area: Industrial and Systems Engineering

Chair: Filippo Verre

Hydro Solidarity and Turkey’s Role as a Waterpower in the Middle East: The Peace Water Pipeline Project

Filippo Verre; Sweden
Research Area: Law and Political Sciences

Water Diplomacy and Technology: The Role of Desalination in Mitigating Hydropolitical Conflicts

Laura Inuit; Canada
Research Area: Law and Political Sciences

Hydropolitical Risk Assessment and Insurance: A New Framework for Managing Water-Related Uncertainties

Stefan Waldbauer; Germany
Research Area: Law and Political Sciences

Multilateralism in the Era of Global Challenges: A Case Study of the Paris Agreement

Robert Vukovic, Sandra Grgic, Ivan Simunic; Croatia
Research Area: Law and Political Sciences

The Geopolitics of Dams: A Case Study of the Nile River Basin and the Grand Ethiopian Renaissance Dam

Salma Al-Habtoor, Latifa Al-Maktoum; United Arab Emirates
Research Area: Law and Political Sciences

The Effect of Positive and Safe Parenting Skills on Mothers’ Cognitive Flexibility and Mental Health of Adolescents Aged 11 to 14 in Tehran

Alireza Monzavi Chaleshtori, Mahnaz Aliakbari Dehkordi, Maryam Aliakbari, Atefe Keshvari; Iran
Research Area: Psychological and Behavioral Sciences

Psycho-Social Problems Faced by Transgenders in Pakistani Society: A Qualitative Study

Amna Bibi, Hina Rana; Pakistan
Research Area: Humanities and Social Sciences

Chair: E. Ivanova

An Institutional Leadership Framework on University Academics’ Decision to Become Institutional Leaders: A Malaysian Perspective

Norazharuddin Shah Abdullah, Harshita Aini Haroon, Norazian Mohmad Azman, Erlane K. Ghani, Ismie Roha Mohamed Jais, Kamaruzzaman Muhammad, Azleen Ilias; Malaysia
Research Area: Economics and Management Engineering

Microcredentials and Institutional Leadership: A New Frontier in Higher Education

Wu Ming-Xuan; Taiwan
Research Area: Economics and Management Engineering

Building a Culture of Innovation: The Role of Academic Leadership in the Digital Age

Alexandru Popescu, Maria Ionescu, Andrei Vasile, Diana Constantinescu; Romania
Research Area: Economics and Management Engineering

Data-Driven Decision Making: A Strategic Tool for Institutional Leaders

Ragnhild Knudsen; Norway
Research Area: Economics and Management Engineering

Islamic Finance in Algeria: Challenges and Perspectives

Faycal Fatnassi; Algeria
Research Area: Economics and Management Engineering

Digitalization, Supply Chain Integration and Financial Performance: Case of Tunisian Agro-industrial Sector

Rym Ghariani, Younes Boujelbene; Tunisia
Research Area: Industrial and Systems Engineering

The Factors of Supply Chain Collaboration

Ghada Soltane; Tunisia
Research Area: Industrial and Systems Engineering

Chair: Gina Solano

Leveraging Generative Pre-trained Transformers (GPT) for Personalized Learning Paths in Higher Education

Martin Skou; Denmark
Research Area: Educational and Pedagogical Sciences

Revolutionizing Higher Education: AI-Powered Gamification for Enhanced Learning

Gina L. Solano; United States
Research Area: Educational and Pedagogical Sciences

Neuro-Symbolic AI: A New Frontier for Intelligent Educational Agents

Gediminas Dambraitis; Lithuania
Research Area: Educational and Pedagogical Sciences

Natural Language Processing for Automated Essay Grading: A Review

Zofia Kaczmarek, Adam Wisniewski, Barbara Dąbrowska; Poland
Research Area: Educational and Pedagogical Sciences

Fostering Student Interest in Senior Secondary Two Biology Using Prior Knowledge of Behavioural Objectives and Assertive Questioning Strategies in Benue State, Nigeria

John Odo Ogah; Nigeria
Research Area: Educational and Pedagogical Sciences

Influence of Computer and Internet on Student’s Attitude and Academic Achievements in Chemistry at Undergraduate Level in Federal College of Education (FCE) Kano, Nigeria

Abubakar Yusha’U Zubairu; Nigeria
Research Area: Educational and Pedagogical Sciences

A Semantic Functions in the Functional Grammar an Applied Study in Surah Al-Ghashiyah

Nasiru Shuaibu; Nigeria
Research Area: Cognitive and Language Sciences

Unraveling the Enigma of Military Coups through the Lens of State Fragility: A Qualitative Exploration of the Malian and Burkinabe Case

Deretha Bester; Czechia
Research Area: Law and Political Sciences

Teacher’s Personality Potential Contributes to Personality Development and Well-being of Schoolchildren: A Longitudinal Study in Russia

Elena G. Diryugina, Maria A. Dovger, Maria V. Lunkina, Alexandra A. Ianchenko; Russia
Research Area: Psychological and Behavioral Sciences

Neurocognitive Effects of Sleep Apnea in Adults with Attention Deficit Hyperactivity Disorder: A Comprehensive Review

Safina Naaz, Amiya Bhaumik; India
Research Area: Psychological and Behavioral Sciences

Chair: A. Bianchi

Generative Adversarial Networks for Synthetic Language Data Generation

Paul Schembri, Mark Camilleri; Malta
Research Area: Cognitive and Language Sciences

Multilingualism and Identity Construction in European Sociolinguistics and Language Acquisition

Zeynep Uyar, Murat Karaca, Ali Güven; Türkiye
Research Area: Cognitive and Language Sciences

Language Contact and Change: Variation in the Apodosis in Conditional Expressions in Phoenix, Arizona

Edgar Olozagaste, Laura Dicochea; United States
Research Area: Cognitive and Language Sciences

The Role of Brain Plasticity in Second Language Acquisition

Latifa Al-Hamadi, Jassim Al-Mannai; Qatar
Research Area: Cognitive and Language Sciences

Bayesian Inference for Language Tree Reconstruction

Rajan Krishnan, Siti Nurul Huda, Aminah Abdullah; Malaysia
Research Area: Cognitive and Language Sciences

Chair: A. Novak

Internal Family Systems Parts-Work: A Revolutionary Approach to Reducing Suicide Lethality

Bill D. Geis; United States
Research Area: Psychological and Behavioral Sciences

The Efficacy of Ketamine-Assisted Psychotherapy for Suicidal Ideation

Eva Lentz; Luxembourg
Research Area: Psychological and Behavioral Sciences

Crisis Text Line Interventions: A Randomized Controlled Trial of Text-Based Suicide Prevention

Dimitris Koutroumanis, Sofia Markopoulos, Nikos Mavromatis; Greece
Research Area: Psychological and Behavioral Sciences

Family Therapy for Chronic Illness: A Qualitative Study

Marija Grgic; Croatia
Research Area: Psychological and Behavioral Sciences

Existential Risk and the Philosophical Foundations of Space Exploration

Olivier Aubry, Camille Breton; France
Research Area: Humanities and Social Sciences

Liberty, Nullification, and the Rule of Law

Travis Hreno; United States
Research Area: Humanities and Social Sciences

Kant's Critique of Pure Reason and the Nature of Quantum Entanglement

Flemming Friis; Denmark
Research Area: Humanities and Social Sciences

Chair: K. Thompson

Wealth Creation and its Externalities: Evaluating Economic Growth and Corporate Social Responsibility

Zhikang Rong; United States
Research Area: Economics and Management Engineering

The Effectiveness of Foreign Aid in Different Political Regimes of Pakistan

Umar Hayat, Shahid Ali, Lala Rukh; Pakistan
Research Area: Economics and Management Engineering

The Future of Environmental Auditing: Trends and Challenges in the Digital Age

Lily Sutton Coldfield; United States
Research Area: Economics and Management Engineering

Integrating Natural Capital into Environmental Accounting: A Case Study of Renewable Energy Projects

Matthew Graves; Australia
Research Area: Economics and Management Engineering

The Effectiveness of Environmental Auditing in Preventing Pollution: A Case Study

Amelia Yardley, Ethan Solihull; Canada
Research Area: Economics and Management Engineering

Banking and Accounting Analysis Researches Effect on Environment

Michael Saad Thabet Azrek; Egypt
Research Area: Economics and Management Engineering

Chair: Khawla Almulla

Women And Gender Inequality: The Academic Experience

Akanle Florence Foluso; Nigeria
Research Area: Humanities and Social Sciences

The Mediterranean Dimension in Egypt Between Ebbs and Flows

Mohamed Hassan; Egypt
Research Area: Humanities and Social Sciences

AI-Powered Personalized Teacher Training for Enhancing Language Teaching Competence

Ororho Maureen Ekpelezie; Nigeria
Research Area: Educational and Pedagogical Sciences

Cracking the ‘Glass Ceiling’ Code: The Intricate Dance of Gender and Discipline in Chinese Research University’s Career Promotion

Yu Yitian, Chen Kaizhe, Liu Jin; China
Research Area: Educational and Pedagogical Sciences

Enhancing Entrepreneurial Skills, Vocational, and Technical Education in Nigeria Schools: The Challenges and Way Forward

Stella Chioma Nwizu, Emmanuel Nwangwu; Nigeria
Research Area: Educational and Pedagogical Sciences

The Ethos of Rationing Water Consumption According to the Prophetic Guidance, and the Role of Universities in Disseminating & Reinforcing It: King Faisal University as a Model

Khawla Almulla; Saudi Arabia
Research Area: Humanities and Social Sciences

The Inter-Play Between Traditional Religion and Christianity in Eggon Landn Eggon Land

Akolo Ajige; Nigeria
Research Area: Humanities and Social Sciences

Psycho-Social Problems Faced by Transgenders in Pakistani Society: A Qualitative Study”

Amna Bibi, Hina Rana; Pakistan
Research Area: Humanities and Social Sciences

Single-parent Families and the Criminal Ramifications on Children in the United Kingdom; A Systematic Review

Naveed Ali; United Kingdom
Research Area: Law and Political Sciences

PROGRAM LAST UPDATED: November, 06 2024 11:00

PROGRAM GUIDELINES

1.GUIDE FOR ORAL AND e-POSTER PRESENTATIONS

We kindly ask ORAL presenters to prepare electronic presentations of 15 minutes (allowing 5 minutes for discussions) and e-POSTER presenters to prepare short electronic presentations of 5 minutes (allowing 5 minutes for discussions) (NO PRINT OUTS). A Linux-based operating system is used for both Oral and e-Poster presentations. All presenters should make a PDF file version of their presentation and upload it to the system.

2. ROLE OF THE SESSION CHAIR

The duties of the Session Chair include the following:

1. Arrive at the conference hall at least 10 minutes before the session begins. Identify the paper presenters and discussant(s) in advance, and introduce yourself. Remind each presenter of the time limits that apply, and describe the method you will use to alert them of time limits during the actual presentation.
2. At the start of the session, introduce yourself to the audience, announce the session/title, and offer a brief overview indicating how the papers are related.
3. Prior to each presentation, introduce the speaker, announce the paper’s title, the name(s) of the author(s), and provide brief comments regarding the affiliation and/or background of each presenter. Identify the individual who will be speaking if it is someone other than the first author.
4. During the presentations enforce time limits strictly so that no author (or audience member) monopolizes someone else’s time. Oral paper presentations each have 20 minutes (15 minutes for full presentation papers, 5 minutes for discussions), and 10 minutes for e-Poster (electronic poster) presentations (5 minutes for poster presentation, 5 minutes for discussions).
5. Once presentations are complete (oral paper presentations and e-Poster presentations), the remaining time can be used for informal discussion between the audience and session participants. It is your job to field questions from the audience.
6. Try to conduct the session as informally as possible (e.g., use first names when addressing participants and members of the audience) to encourage as much audience participation as possible.

3. BEST PAPER AWARDS / BEST PRESENTATION AWARDS

A 'Best Paper Award / Best Presentation Award' will be conferred on the author(s) of an abstract or a full paper presented at the conference. Selection is made based on the best combined marks of the abstract / paper review and presentation quality appraisal conducted by the Session Chair at the conference venue, and assessed by the Program Committee. Award winners will be announced after the conference. The author(s) of a selected paper/presentation will receive a signed and stamped official Best Paper Award / Best Presentation Award e-certificate.